Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Kitchen Remodeling: The Glendale Owner’s Guide
An Ameristar kitchen remodel in Glendale typically runs $14,000 – $45,000 installed, depending on cabinet layout, countertop material, and whether the job needs electrical or plumbing work behind the walls. We install full Ameristar-compatible kitchen packages – cabinets, counters, islands, backsplash – with permits pulled and a written scope before work starts.
Owners usually call us after a cabinet door no longer lines up, a drawer bottom sags, or a countertop seam opens. Those are the first signals that something under the surface has shifted. Ameristar cabinets are common in Glendale mid-century tracts and condo conversions, and the failure patterns we see depend on which series is in your kitchen. We’re an independent contractor and not affiliated with Ameristar, but we know these cabinets well enough to tell you whether you’re looking at a repair or a full remodel.
Key Takeaways
- Installed Ameristar kitchen remodeling in Glendale runs $14,000 – $45,000, with line-item pricing in writing.
- Most “Ameristar part” calls turn out to be a cabinet box, hinge, or countertop issue, not a component failure.
- We pull permits and have the inspections signed on every eligible kitchen job.
- Every scope or price change arrives as a written change order before work happens.
Which Ameristar Models This Applies To
Ameristar is a stock and semi-custom cabinet line sold through building centers across Southern California, and the version in your Glendale kitchen tells you a lot about what you can replace and what you can’t. If your cabinet boxes are stamped with a series label or a part number inside the door, that number matches the door style, finish, and box dimensions. If the label is gone, we identify it by measuring box width, door overhang, and hinge bore spacing – three measurements that separate most Ameristar families.
The compatibility gotcha: Ameristar changed hinge and drawer-glide mounting patterns between production runs. A door ordered to fit the nominal box size can still miss the hinge plate by a few millimeters if it’s from a different run than your cabinet. That’s the mistake we see most on owner-ordered parts: the panel arrives, it fits the opening, but it won’t hang square because the bore is wrong.
OEM replacement doors and hinges for Ameristar are available but slow to arrive when the series is retired. Quality aftermarket equivalent hinges and slides fit most Ameristar boxes and last longer than the originals. On a full remodel, we may recommend moving to KraftMaid or Cambria components where the Ameristar line has been discontinued – and that’s part of the estimate conversation, not a surprise on the invoice.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Kitchen Remodeling Is Failing
Here’s what we actually see on Glendale kitchen calls, and what each symptom usually means:
- Doors that won’t stay aligned. The hinge screws have pulled out of the particleboard box side because the original bore was slightly off or the wood has swollen. Repairable with inserts and new hinges if the box isn’t split.
- Drawers that bind or drag. The under-mount glide has bent or the back panel has separated from the bottom. Usually a glide swap, not a cabinet replacement.
- Cabinet boxes separating at the corners. In Glendale, we see this in kitchens that sat through summer heat without a functioning range hood. The glue line dries, the joint opens, the door goes out of square.
- Countertop seams opening or laminate lifting. The substrate has swelled from a slow leak under the sink or a failed dishwasher gasket. This one is a remodel trigger, not a repair.
- Constant small water marks near the base. The toe kick or the base cabinet bottom is wicking moisture from a pinhole supply line. Cheap to fix now, expensive after the box rots.
We look at all five together before suggesting a plan. Sometimes two of them add up to a repair, and sometimes they add up to a kitchen you’d be throwing money at.
Replacement Cost & What’s Included
Here’s the pricing we quote in Glendale, with labor and materials broken out at the estimate stage:
| Scope | Installed Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: cabinet count and box depth, countertop material (laminate to quartz is a big spread), whether electrical or plumbing needs to move, and whether the wall behind the old cabinets is sound. Every line item is in the written estimate before work starts. If scope changes mid-job, the change order is on paper before a nail moves. We back the completed job with our written 90-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely do a few things yourself: measure your cabinet boxes and door bores, check that the hinges and glides are the source of the problem, and photograph any part labels inside the doors. Those photos speed up a parts match and often save you a trip to the building center.
Where DIY goes wrong is where the work touches water, gas, or wiring. Pulling a cabinet that hides a supply line or a gas stub is how a small job becomes an emergency. Moving a countertop with a live outlet behind it, or a range hood with a 240-volt feed, is not the place to learn. Glendale’s older housing stock hides a fair share of unpermitted past work; what looks like one failed cabinet can open into a code issue once the box comes out. We’re a licensed contractor, and we know when to stop and call it.
If you’re not sure whether your Ameristar issue is a part or a remodel, call us at (844) 560-4526. A live person answers, day or night. The first visit is a free estimate, and the second opinion on any written estimate is on the house.
Frequently Asked Questions
Most Ameristar cabinet boxes hold up 15 to 20 years in a Glendale kitchen, and the doors and glides are often the first components to go – usually in half that time. The dry inland air plus summer heat cycling wears hinges and glides faster than most owners expect, so it’s the hardware, not the cabinet box, that usually gets replaced first.
In many cases yes – a hinge or glide swap under $200 in parts gets an Ameristar door or drawer back to square. Full box separation, countertop substrate failure, or water damage past the toe kick usually pushes you toward replacement. Call (844) 560-4526 for a look before you decide; the estimate is free.
A cabinet hardware swap or a single door replacement is usually a half-day job. A full Ameristar kitchen remodel in Glendale runs two to four weeks on the schedule we put in writing at estimate time, depending on countertop lead time and permit inspection.
We match by the cabinet’s series label or by box measurement, then order from Ameristar’s current distribution or from a quality aftermarket equivalent we’ve used on prior Glendale jobs. We don’t stock parts on a truck – each part is ordered to your cabinet’s spec, which is why we take measurements carefully before ordering once.
Get a Free Estimate in Glendale
Whether you need a single Ameristar door replaced or the whole kitchen redone, the first step is the same: a free, written estimate with the scope and allowances in writing before anything happens. We’re an owner-operated crew, we pull the permits, and every price change comes on paper. Our crew members have up to 28 years of experience and carry the Barrett & Sons name on every visit. Call (844) 560-4526 to schedule your free estimate – a live person answers 24/7.
We also work with KraftMaid, Cambria, and Silestone when the Ameristar line doesn’t fit what you need.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.