A Barrett company - serving Glendale, CA

Bufftech Driveway & Pavers in Glendale, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Bufftech Driveway & Pavers: The Glendale Owner’s Guide

Quick answer: We install Bufftech-compatible driveway and paver systems in Glendale, and a full paver driveway typically runs $7,000 – $18,000 installed, with smaller paver patio projects at $3,500 – $11,000. A failed part is usually discovered one of three ways: a lifting or rocking paver at the driveway apron, sand washing out from the joints after a rain, or a cracked edge course at the street transition where the city sidewalk meets your property. In Glendale, that last one shows up fast because the city’s freeze-thaw cycles and heavy clay soil push water to the surface rather than letting it drain. We pull the permits, order the replacement part, and get your driveway back to flat and stable. Barrett & Sons Construction Glendale is an independent contractor and isn’t affiliated with Bufftech.

Call (844) 560-4526

Which Bufftech Models This Applies To

Bufftech is a polymer and vinyl fencing and hardscape brand, and its driveway and paver offerings fall into a few distinct product families. The most common are the manufactured paver systems and the paver edging and retaining components that Bufftech sells alongside its fencing lines. Before anyone orders a part, we need to know exactly which series you have, because parts are not interchangeable between them.

Here’s how to identify what you’re working with. Check the back of the product label or the underside of a loose paver – Bufftech stamps the series name and sometimes a date code on the back of each unit. If the label is gone, measure the paver face and thickness; Bufftech’s driveway pavers typically run in the 2 3/8-inch to 2 3/4-inch thickness range, and the exact thickness determines which edging and joint sand will seat correctly. The thickness matters more than most owners realize: a paver system built on a 2 3/4-inch base with 2 3/8-inch replacement units will rock, and no amount of sand will fix it.

On OEM versus aftermarket: for Bufftech paver edging, corner clips, and joint sand, a quality aftermarket equivalent is fine and often faster to source in Glendale. For the pavers themselves, matching the exact series matters, because color lots and face profiles vary. When you call us, have your paver count and a photo of the failing piece ready, and we’ll confirm the match before we quote.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Bufftech Driveway & Paver System Is Failing

Most Glendale owners don’t notice a problem until something looks wrong at eye level. Here are the five symptoms we see most often, and what’s actually causing each.

  • Pavers rocking or rocking underfoot. This almost always means the bedding sand has shifted or the base wasn’t compacted deep enough. In Glendale’s clay soil, water moves sideways instead of down, and that movement pushes the sand out from under the pavers.
  • Joint sand washing out after rain. If you’re sweeping sand back into the joints every few months, the culprit is usually a missing or cracked edge restraint. The edge course holds the whole system tight, and once it fails, sand migrates.
  • Heaving or lifting at the driveway apron. The apron takes the most traffic and the most water runoff. Heaving here points to a base failure or a drainage issue where the driveway meets the street.
  • Cracks in the edge course or a corner that’s chipped. Chipped corners at the street transition are common where the city sidewalk meets your property. A frozen joint or a curb that’s been hit lets water in.
  • Sunken spots or dips in the surface. A dip means the sub-base is settling, often because the original install didn’t reach the compacted depth this soil requires. In Glendale, we see settling most often on driveways that were laid over existing concrete instead of fresh base.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Pricing for a Bufftech paver driveway replacement or repair in Glendale depends on how much of the system has failed. If the base is intact and only a section of pavers or edging needs to come up, the job is faster and less expensive. If the base itself has moved, the repair runs deeper.

Project Installed Price Range (Glendale)
Paver driveway installation $7,000 – $18,000
Driveway replacement $5,000 – $14,000
Paver patio installation $3,500 – $11,000
Driveway sealing $250 – $700

What drives the range: square footage, whether the base needs rework, the exact Bufftech series and color lot, and how much of the edge course is compromised. Every price change gets a written change order before we touch the job – no surprise invoices. Every eligible job includes permits pulled and inspections signed, and every completed job is backed by our 90-Day Done Right Promise.

DIY or Call Us?

Some of this is safe to check yourself. Walk the driveway and mark the rocking pavers with chalk. Sweep the joints and note where sand disappears fastest. Photograph the failing edge course. That information helps us quote accurately and saves you time on the phone.

Where DIY goes wrong: digging up and relaying pavers without compacting the base to the right depth just moves the failure six months down the road, and a base that isn’t reworked properly will heave again next winter. Matching a replacement paver to your Bufftech series is also harder than it looks, because color lots vary and the wrong thickness will rock no matter how carefully you set it. There’s no injury risk in paver work the way there is with springs or gas lines, but there is a real risk of doing the labor twice.

Call (844) 560-4526 to schedule a free estimate. We’ll confirm your part, quote the job in writing, and answer the phone when you call back.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch