Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
American Standard Kitchen Remodeling: The Glendale Owner’s Guide
American Standard kitchen remodeling in Glendale runs $14,000 – $45,000 for a full kitchen, with a small kitchen remodel landing at $9,000 – $20,000. That range covers American Standard fixtures, cabinets, counters, and labor, with the scope and every allowance written on paper before work starts. Most Glendale owners don’t shop this page until a part fails, a finish stops matching what they can still order, or a bearing guide on a drawer slides rough and they realize the whole kitchen has aged out at once.
Key Takeaways
- Full American Standard kitchen remodel in Glendale: $14,000 – $45,000. Small kitchen: $9,000 – $20,000.
- We’re an independent Glendale contractor, not affiliated with American Standard. We install and match the brand.
- Every price change arrives as a written change order before the work happens.
- Permits pulled and inspections signed on every eligible job.
- 90-Day Done Right Promise on every remodeling job, in writing on the contract.
Which American Standard Models This Applies To
American Standard is best known for plumbing fixtures, but the brand also touches kitchen work through faucets, sinks, and the cabinets and finishes that have to line up around them. The realistic compatibility gotcha is this: American Standard faucet models have been quietly retired and renumbered across decades, and the mounting-hole spacing and supply-line fitting on a new model won’t always match the old one without an adapter or a plate change. Pull the model number off the tag under the sink or on the faucet body, measure your existing hole spacing (8-inch centers on a widespread versus a single-hole deck), and bring both numbers to the quote.
On the OEM-versus-aftermarket call: for faucets and valves, stick with the American Standard part or a known equivalent, because a cheap offshore cartridge can leak again in a year and the trim won’t index right. For cabinet hardware, drawer glides, and hinges, quality aftermarket equivalents are fine and often cheaper. We write down which is which before ordering. We’re an independent Glendale contractor and not affiliated with American Standard. Other brands we also work with include KraftMaid, Cambria, and Silestone.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your American Standard Kitchen Remodeling Is Failing
- Dripping or weeping at the faucet base. A worn cartridge or O-ring, usually the first thing to go on an older American Standard faucet, and it lets water creep under the deck. Two decades in a dry Glendale cabinet is enough to do it.
- The faucet handle travels too far or doesn’t shut off clean. The cartridge seat has scored. That’s a cartridge swap, not a whole faucet, but the model has to match.
- Drawers that stick or pull crooked. Tolerance buildup in the box, or a failed glide. In a kitchen pushing 20-plus years, this usually signals cabinets nearing the end of their useful life, not one bad slide.
- Counter seams separating or caulk lines failing. Movement from the cabinet base. Left alone, water gets into the substrate and the repair grows past a simple reseal.
- Finish pitting or peeling on fixtures. PVD and chrome finishes pit faster with hard water and harsh cleaners. Once the finish is gone, replacement is the honest fix.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what American Standard-friendly kitchen work costs in Glendale, line by line. These are installed ranges, parts and labor together.
| Job | Installed range (Glendale) |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: cabinet layout and box count, counter material, whether the layout moves plumbing or electrical, and the condition behind the old cabinets. Faucet and sink trim get itemized separately so you see the American Standard part price on the quote, not buried in a lump sum. Permits pulled and inspections signed on every eligible job. Everything is backed by the written 90-Day Done Right Promise.
DIY or Call Us?
You can safely check for yourself: turn off the supply valves, look at the model tag, measure the faucet hole spacing, and read the cabinet interior for water damage or mold. That’s information, not repair. Where DIY goes wrong is anything behind a valve or under a counter you can’t reach cleanly. Shutting off a corroded old angle stop to swap a cartridge often snaps the valve, and suddenly the water’s off for the whole house. Cutting a counter for a new island or sink you bought American Standard for, if the template’s off by a quarter inch, is now a $2,000 countertop. For any water line, drain, or structural cut, that’s a licensed plumber or our crew. The inspector who signs off works for you. Call Barrett & Sons Construction Glendale at (844) 560-4526 for a free estimate.
FAQs
Seven to fifteen years for a cartridge in Glendale’s water, with finish life often shorter than the valve body. Hard water shortens both. If yours is dripping, that’s the tell. Call (844) 560-4526 for an exact quote on the swap.
Yes, often. A scored cartridge can usually be swapped without replacing the whole faucet if the model is still supported. If the body is pitted through, we tell you that straight instead of selling you the cheap fix twice. Call (844) 560-4526.
A small kitchen runs two to four weeks; a full remodel with cabinetry, counters, and the American Standard fixtures runs four to eight weeks, depending on permit timing and counter fabrication. You get the schedule in writing. Call (844) 560-4526 to lock a start date.
We confirm your model number, then order OEM or a verified equivalent before anything gets installed. No mystery parts, no substitutions without a written change order. Call (844) 560-4526 to start with a free estimate.
Ready to price it? Barrett & Sons Construction Glendale installs American Standard-compatible kitchen remodels across Glendale, with written scope, written allowances, and permits pulled every time. We’re owner-operated, backed by the 90-Day Done Right Promise, and a live person answers the phone 24/7. The crew members are background-checked and uniformed on every visit. Standing offers include a free second opinion on any written estimate, $40 off any repair over $200, no trip charge inside the county, and a permanent 10% Senior & Veteran discount. Call (844) 560-4526 for your free estimate.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.