A Barrett company - serving Glendale, CA

Ameristar Bathroom Remodeling in Glendale, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Ameristar Bathroom Remodeling: The Glendale Owner’s Guide

Ameristar bathroom remodeling in Glendale runs $9,000 – $28,000 for a full bath, and $5,000 – $12,000 for a small one, installed with permits pulled and inspections signed. Pricing is line-item and written, so an Ameristar tub or shower package gets quoted piece by piece, not as one lump number you have to take on faith. Most Glendale owners land on this page the same way: the tub surround has cracked where the wall flexes, the shower pan holds water that won’t drain, or the vanity top has a chip that keeps getting bigger. That’s the point where the part has to be matched to the model, not guessed at.

Call (844) 560-4526

Key Takeaways

  • Ameristar parts are model-specific. A surround panel for one series usually won’t seat on another, and the box label is the only reliable confirmation.
  • Full Glendale bath remodels run $9,000 – $28,000; targeted swaps like a shower replacement run $3,000 – $8,500.
  • Measure and photograph your existing unit before you shop. Every honest quote starts with your model number, not our memory.
  • We’re an independent Glendale contractor, not affiliated with Ameristar. We install and replace their products; we don’t represent them.

Which Ameristar Models This Applies To

We’re working with Ameristar tub and shower units, surrounds, pans and vanity tops. The brand isn’t a single product line, and that’s where most of the confusion starts. Two surrounds that look identical on a showroom wall can have different panel heights, different ledge depths, and a different drain cutout. The compatibility gotcha: Ameristar multi-piece surrounds are cut and keyed for a specific pan. Swap the pan without matching the surround series, or replace one panel of a three-piece set, and you’ll get gaps at the seams wide enough to see daylight and hold water. Measure the assembled unit, not the wall it sits against: panel width, height from the pan floor to the top ledge, and the drain’s distance from the back wall. Then photograph the label on the back of the unit if you can reach it, and write down any series name printed on it. OEM panels cost more but fit the first time. A quality aftermarket equivalent can work well for flat goods like a vanity top, less reliably for a keyed surround. KraftMaid, Cambria, and Silestone are also brands we install, if the job grows past the Ameristar piece.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Ameristar Bathroom Remodeling Is Failing

These are the failures we get called about most often in Glendale bathrooms, and what’s actually going on under each one.

  • Hairline cracks spreading at the surround seams. The caulk failed and water is getting behind the panel, so the wall board behind it softens and flexes. The crack is a symptom; the wet substrate is the problem.
  • A soft or springy spot on the tub floor or shower pan. The pan’s base has separated from the subfloor, or the original install skipped a mortar bed. Left alone, the pan itself cracks and the leak moves under the floor.
  • Water pooling around the drain instead of draining. Usually a gasket or drain fitment issue, sometimes a pan that was set slightly out of level. Catching it early is the difference between a $3,000 – $8,500 shower replacement and a floor repair too.
  • Mildew staining that keeps returning after cleaning. Moisture is trapped behind the surround or in the caulk line. Cleaning the surface won’t fix a venting or sealing problem, and it won’t fix a wall cavity that’s already damp.
  • A chip or dull spot on the vanity top. Engineered tops chip at the edge, and an old laminate top just wears through. Small chips can be filled; a cracked apron or a soft substrate behind it means replacement.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what Glendale owners actually see on a written quote, line by line, so you can compare bids on the same scope.

Scope Installed range (Glendale)
Full bathroom remodel $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement $3,000 – $8,500
Bathroom vanity installation $800 – $3,000

What moves you within a range: whether the pan needs a new mortar bed, whether the wall board behind the surround is wet, whether the valve needs to be brought up to current code, and whether the permit triggers a rough-in inspection. Parts plus labor are quoted separately, so you see what the Ameristar piece costs and what installing it costs. Every job that qualifies gets permits pulled and inspections signed. Every completed job carries our 90-Day Done Right Promise in writing.

DIY or Call Us?

What you can safely do yourself: measure the existing unit, photograph the model label, clean old caulk, and re-caulk a sound surround that isn’t leaking behind it. That’s real maintenance and it’s worth doing. Where it goes wrong: pulling a surround panel off a wet wall and finding soft board, cutting an aftermarket pan to fit a surround it wasn’t made for, and resetting a shower pan on a subfloor that needs repair first. And the one to stop on altogether: nothing on a bathroom replacement is worth doing live around a valve you haven’t shut off and verified, because a supply line that lets go in a second-floor Glendale bath does thousands in damage in minutes. If the surround is cracked through or the pan is soft, that’s a call, not a weekend project. Call (844) 560-4526 for a free estimate and a second opinion on any written bid you already have.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch