A Barrett company - serving Glendale, CA

Ameristar Fence Installation in Glendale, CA

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Ameristar Fence Installation: The Glendale Owner’s Guide

Ameristar aluminum fence installation in Glendale, CA typically runs $3500 – $9000 for a standard residential run, depending on linear footage, panel height, grade changes and gate count. We install Ameristar-compatible aluminum fencing across Glendale and surrounding neighborhoods, and we handle the parts matching, layout and permitting while you get a written line-item quote before anything gets dug. If a panel, post or gate section has already failed, we’ll price the repair and the replacement side by side.

Call (844) 560-4526

Most Glendale owners find out something’s wrong the same way. The gate starts dragging on the latch strike. A post at the driveway apron looks a little off-plumb. Then a wind event comes through the Verdugo foothills and a whole panel section leans. Aluminum fencing is unforgiving that way: it fails at the connections first, not the finish. The powder coat looks perfect right up until the footings tell the story.

Which Ameristar Models This Applies To

Ameristar’s residential lines split mostly by picket style and rail profile – the classic three-rail ornamental look, the flat-top and spear-top variants, and the welded panel systems used for pool code and commercial-grade runs. The part that fails, in almost every case, is not the panel. It’s the post footing, the post itself at the ground line, the hinge and latch hardware on the gate, or the bracket that ties panel to post.

To identify what you’re working with, measure your post spacing center to center. Standard Ameristar residential panels run on 6-foot or 8-foot spacing, but Glendale’s sloped lots frequently use racked panels and stepped transitions, so the spacing on your run may not be uniform – especially along driveways that climb toward Chevy Chase Canyon. Measure the post section too. Ameristar’s posts come in different wall thicknesses, and matching the right one matters if you’re replacing a single post rather than a run. Look for the manufacturer label on the inside of a rail or on the gate frame; it usually lists the series. If there’s no label, take three measurements (post spacing, post size, panel height) and we can match it from there.

On the OEM-versus-aftermarket question: Ameristar’s own posts and brackets are the cleanest match, and for a partial replacement we lean that way. For hardware and footings, quality aftermarket equivalents are fine and often what we’d specify anyway, because the post base and concrete footing are doing the structural work regardless of whose name is stamped on the bracket. We don’t claim to stock parts or carry them on the truck – we source what your specific run needs, and we tell you which is OEM and which isn’t in the quote.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Ameristar Fence Installation Is Failing

  • Post bases leaning after wind or soil movement. In Glendale, the shrink-swell clay soils in some foothill areas and the older alluvial ground closer to the flats both move seasonally. A post set too shallow or in a footing that’s cracked will lean before the panel ever bends.
  • Rust bleeding at the ground line on the post. Powder-coated aluminum doesn’t rust, so if you’re seeing corrosion it’s almost always a steel post or a steel bracket that’s been wicking moisture. That’s a footing drainage problem as much as a parts problem.
  • Gate sag at the hinge side. Aluminum gates are light but they’re long, and a hinge plate that’s loosened in the post wall or a post that’s shifted a quarter inch will drop the latch out of alignment. If the gate drags, don’t shim the latch – find the cause.
  • Loose or missing panel-to-post brackets. These are small stamped pieces and they take the wind load. A missing bracket on a run facing the Santa Ana wind corridor is a panel waiting to peel.
  • Powder coat chalking or chipping at cut edges and welds. Sun exposure across Glendale is hard on finishes. Chalking is cosmetic; chipping that exposes bare aluminum at a weld is where you’ll eventually get pitting.

Replacement Cost & What’s Included

Full Ameristar-compatible aluminum fence installation in Glendale runs $3500 – $9000 for a typical residential property. That’s the installed number: materials, footings, layout, and cleanup. The lead driver is linear footage, followed by grade difficulty, gate count and whether we’re tying into an existing run or starting fresh.

For a partial replacement – a post section, a gate, a few panels – the price is quoted line by line so you can see parts and labor separately. What drives the range on a repair:

  • Number of posts being reset or replaced
  • Footing depth required and whether old concrete has to come out
  • Whether the panels are racked for slope and need to be re-cut to fit
  • Gate hardware (hinges, latch, self-closer if pool code applies)
  • Whether a permit is required – Glendale has fence height and setback rules that vary by zoning, and we pull the permit when the job is eligible for one

Every price change gets a written change order before work proceeds. Not after. Every completed job is covered by our written 90-Day Done Right Promise.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Here’s the honest split. You can safely check your own fence, and you should. Walk the run, push each post, look at the ground line for cracks or settling, open and close the gate, and check whether the brackets are all there. Take photos and measure your post spacing. That five minutes will tell you whether you have a hardware problem or a footing problem, and we’ll take those photos over the phone and tell you what we see.

What we would not do yourself: resetting a post in concrete, or re-hanging a gate that’s structurally loaded. A leaning post that’s still under tension can come out hard and fast, and a gate frame is heavier than it looks. This isn’t a scare tactic – it’s just a job where a bad afternoon is more likely than a good result. We’re an independent contractor and not affiliated with Ameristar, so we can tell you plainly when an Ameristar-compatible repair makes more sense than a full replacement. Call (844) 560-4526 and we’ll talk it through.

FAQs

Get a Written Quote on Your Ameristar Fence

Barrett & Sons Construction Glendale has been owner-operated since 1998, and every scope, allowance and price change arrives in writing before a single nail moves. If you’re dealing with a failed Ameristar section in Glendale, we’ll come out, look at the footings, and give you a written quote with the parts and labor broken out. Free second opinion on any written estimate you already have. No trip charge inside the county. The permanent 10% Senior & Veteran discount applies.

Call (844) 560-4526 to schedule your free estimate. A live person answers, day or night.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch