A Barrett company - serving Glendale, CA

Ameristar Home Additions & ADU in Glendale, CA

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Ameristar Home Additions & ADU: The Glendale Owner’s Guide

We build and finish Ameristar-compatible home additions and ADU work for Glendale homeowners, and most additions here run $45,000 – $130,000 installed depending on size, foundation, and finish level. If you already have Ameristar components in a failing addition or a half-finished ADU, we can match the parts and pick up where the last crew stopped. Owners usually figure out something’s wrong the same way: a roof-to-wall joint that keeps opening, siding that waves when the sun hits it, or a window that won’t close square inside a newly framed wall. Call (844) 560-4526 to schedule a free estimate.

Call (844) 560-4526

Key Takeaways

  • Typical Glendale addition budget: $45,000 – $130,000. Full ADU builds: $90,000 – $220,000.
  • Additions are planned work, not emergency work. We schedule, permit, and build in sequence.
  • Every price change comes to you as a written change order before the work moves forward.
  • Permits pulled and inspections signed on every eligible job.

Which Ameristar Models This Applies To

Ameristar’s residential line covers combination storm doors, storm windows, and patio door systems, and the components that show up inside additions are usually their storm door units, screen panels, and the hardware kits that go with them. Model numbers are stamped on a label on the door jamb or inside the frame channel, and the format matters: the first digits give you the nominal width, and the letters after it tell you the series and handing. Measure the rough opening yourself before you order anything. Ameristar frames don’t always swap clean between series, and a unit built for one jamb depth won’t sit flush in another without reworking the opening.

On the OEM side, Ameristar parts are available through their distribution network, and they’re the safest match for an existing frame. Quality aftermarket equivalents exist for closers, sweeps, and strike plates, and those are fine for wear items. For structural components and anything inside the framed opening, that’s where the aftermarket gets risky. We don’t stock parts and we don’t carry parts on a truck. When we source a replacement, we pull it against your actual model number, not a guess from a photo. We’re an independent contractor, not affiliated with Ameristar, so our job is matching their part to your building. For the other finishes in the same project, we also carry KraftMaid, Cambria, and Silestone.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Ameristar Home Additions & ADU Is Failing

  • Daylight at the frame corners. Weatherstripping has flattened or the frame has shifted out of square as the addition settled. Both are fixable, but the fix isn’t the same.
  • Water staining on the interior jamb. Usually failed flashing at the wall intersection, not the door itself. Repainting over it delays the real repair.
  • A door that drags or won’t latch one season and works fine the next. Glendale’s dry summer heat and wet winters push wood and vinyl through real movement. Consistent drag is a hinge or frame issue; seasonal drag is normal.
  • Hairline cracks along the addition’s interior drywall seams. Often a sign the framing is still moving, or that the original crew skipped proper tying to the existing wall.
  • Screen panels popping out of their channels. The retainer spline has hardened in the sun. Cheap part, ten-minute fix, which is why we don’t make you buy a whole new unit for it.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what the work actually runs in Glendale, so you can price against it before anyone comes out:

Scope Typical installed cost
Home addition (Ameristar components included) $45,000 – $130,000
ADU construction $90,000 – $220,000
Garage conversion to living space $30,000 – $80,000

What drives the range: foundation type, whether the addition ties into an existing roofline or gets its own, window and door count, and finish level. The number you get is a scoped number, not a phone quote that grows legs. Every scope and allowance goes in writing, every price change comes as a written change order before work starts, and every completed job carries the 90-Day Done Right Promise. If something’s off in that window, you make one call and we come back. The permit inspector works for you, not for us, which is exactly why we pull the permits.

DIY or Call Us?

You can safely do the checking yourself: measure the rough opening, write down the model and serial from the jamb label, note which way the door hands, and photograph the failure up close. That takes ten minutes and saves a return visit. What we’d steer you away from is framing repair, flashing work, and anything that involves opening the wall or working near electrical runs in a converted garage. Those aren’t jobs where a bad afternoon teaches you a lesson; they’re jobs where a bad afternoon costs you a wall and a permit violation. In Glendale, an unpermitted addition is a problem that follows the house when you sell it. If the framing or flashing is the issue, call us at (844) 560-4526 and we’ll look at it.

FAQs

How long do Ameristar doors and windows last inside a Glendale addition?
Expect fifteen to twenty years for the unit itself, less for the weatherstripping and hardware. Glendale’s summer sun is hard on rubber and vinyl, so splines and seals wear out well before the frame does. Replace the wear parts and you’ll get the full life out of the unit. Call (844) 560-4526 for an exact quote, estimates are free.

Can a failing component be repaired instead of replaced?
Often yes. Hinges, closers, sweeps, splines, and strike plates are all replaceable without touching the frame. Frame and flashing issues are repair work too, just bigger repair work. We’ll tell you which one you’re looking at before anyone commits to a scope.

How long does a swap take?
A single door or window unit is a one-day job once the part is on site. Framing and flashing repairs run two to four days depending on what’s behind the wall. Addition work is measured in weeks, and we’ll put the schedule in writing.

How do you source the part?
We order against your model number from the label, not from a photo. You get the part number and the price in writing before we order. That keeps you from paying for the wrong unit and keeps us honest about lead times.

We’re owner-operated, we pull permits, and we put it all in writing. Call Barrett & Sons Construction Glendale at (844) 560-4526 for a free estimate on your Ameristar addition or ADU work.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch