A Barrett company - serving Glendale, CA

Ameristar Kitchen Remodeling in Glendale, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Ameristar Kitchen Remodeling: The Glendale Owner’s Guide

An Ameristar kitchen remodel in Glendale typically runs $14,000 – $45,000 installed, depending on cabinet layout, countertop material, and whether the job needs electrical or plumbing work behind the walls. We install full Ameristar-compatible kitchen packages – cabinets, counters, islands, backsplash – with permits pulled and a written scope before work starts.

Call (844) 560-4526

Owners usually call us after a cabinet door no longer lines up, a drawer bottom sags, or a countertop seam opens. Those are the first signals that something under the surface has shifted. Ameristar cabinets are common in Glendale mid-century tracts and condo conversions, and the failure patterns we see depend on which series is in your kitchen. We’re an independent contractor and not affiliated with Ameristar, but we know these cabinets well enough to tell you whether you’re looking at a repair or a full remodel.

Key Takeaways

  • Installed Ameristar kitchen remodeling in Glendale runs $14,000 – $45,000, with line-item pricing in writing.
  • Most “Ameristar part” calls turn out to be a cabinet box, hinge, or countertop issue, not a component failure.
  • We pull permits and have the inspections signed on every eligible kitchen job.
  • Every scope or price change arrives as a written change order before work happens.

Which Ameristar Models This Applies To

Ameristar is a stock and semi-custom cabinet line sold through building centers across Southern California, and the version in your Glendale kitchen tells you a lot about what you can replace and what you can’t. If your cabinet boxes are stamped with a series label or a part number inside the door, that number matches the door style, finish, and box dimensions. If the label is gone, we identify it by measuring box width, door overhang, and hinge bore spacing – three measurements that separate most Ameristar families.

The compatibility gotcha: Ameristar changed hinge and drawer-glide mounting patterns between production runs. A door ordered to fit the nominal box size can still miss the hinge plate by a few millimeters if it’s from a different run than your cabinet. That’s the mistake we see most on owner-ordered parts: the panel arrives, it fits the opening, but it won’t hang square because the bore is wrong.

OEM replacement doors and hinges for Ameristar are available but slow to arrive when the series is retired. Quality aftermarket equivalent hinges and slides fit most Ameristar boxes and last longer than the originals. On a full remodel, we may recommend moving to KraftMaid or Cambria components where the Ameristar line has been discontinued – and that’s part of the estimate conversation, not a surprise on the invoice.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Ameristar Kitchen Remodeling Is Failing

Here’s what we actually see on Glendale kitchen calls, and what each symptom usually means:

  • Doors that won’t stay aligned. The hinge screws have pulled out of the particleboard box side because the original bore was slightly off or the wood has swollen. Repairable with inserts and new hinges if the box isn’t split.
  • Drawers that bind or drag. The under-mount glide has bent or the back panel has separated from the bottom. Usually a glide swap, not a cabinet replacement.
  • Cabinet boxes separating at the corners. In Glendale, we see this in kitchens that sat through summer heat without a functioning range hood. The glue line dries, the joint opens, the door goes out of square.
  • Countertop seams opening or laminate lifting. The substrate has swelled from a slow leak under the sink or a failed dishwasher gasket. This one is a remodel trigger, not a repair.
  • Constant small water marks near the base. The toe kick or the base cabinet bottom is wicking moisture from a pinhole supply line. Cheap to fix now, expensive after the box rots.

We look at all five together before suggesting a plan. Sometimes two of them add up to a repair, and sometimes they add up to a kitchen you’d be throwing money at.

Replacement Cost & What’s Included

Here’s the pricing we quote in Glendale, with labor and materials broken out at the estimate stage:

Scope Installed Range
Full kitchen remodel $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What drives the range: cabinet count and box depth, countertop material (laminate to quartz is a big spread), whether electrical or plumbing needs to move, and whether the wall behind the old cabinets is sound. Every line item is in the written estimate before work starts. If scope changes mid-job, the change order is on paper before a nail moves. We back the completed job with our written 90-Day Done Right Promise.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely do a few things yourself: measure your cabinet boxes and door bores, check that the hinges and glides are the source of the problem, and photograph any part labels inside the doors. Those photos speed up a parts match and often save you a trip to the building center.

Where DIY goes wrong is where the work touches water, gas, or wiring. Pulling a cabinet that hides a supply line or a gas stub is how a small job becomes an emergency. Moving a countertop with a live outlet behind it, or a range hood with a 240-volt feed, is not the place to learn. Glendale’s older housing stock hides a fair share of unpermitted past work; what looks like one failed cabinet can open into a code issue once the box comes out. We’re a licensed contractor, and we know when to stop and call it.

If you’re not sure whether your Ameristar issue is a part or a remodel, call us at (844) 560-4526. A live person answers, day or night. The first visit is a free estimate, and the second opinion on any written estimate is on the house.

Frequently Asked Questions

Get a Free Estimate in Glendale

Whether you need a single Ameristar door replaced or the whole kitchen redone, the first step is the same: a free, written estimate with the scope and allowances in writing before anything happens. We’re an owner-operated crew, we pull the permits, and every price change comes on paper. Our crew members have up to 28 years of experience and carry the Barrett & Sons name on every visit. Call (844) 560-4526 to schedule your free estimate – a live person answers 24/7.

We also work with KraftMaid, Cambria, and Silestone when the Ameristar line doesn’t fit what you need.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch