Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Home Additions & ADU: The Glendale Owner’s Guide
If you have a Barrette home addition, ADU, or garage conversion on your property and something in its structure or envelope is failing, we handle the repair, the rebuild, or the full re-scope, and most additions we quote in Glendale land between $45,000 and $130,000 installed; an ADU runs $90,000 to $220,000. We’re an independent construction company, not affiliated with Barrette, and we’re not a same-day operation: additions and ADU work get planned, permitted, and inspected, never rushed. Additions don’t fail overnight. Flatwork cracks, transitions pull apart, and owners usually spot trouble after the rainy season when a hairline in the framing reads as a wet stain on the ceiling. We build to code and stand behind every job with our 90-Day Done Right Promise.
Which Barrette Models This Applies To
“Barrette” gets used loosely. Some households mean a Barrette-branded modular or panel system; others mean a Barrette label on a window, door, or enclosure that came with the addition. Either way, the match starts with the data plate, not the color. Check the manufacturer label on the structural panel, door, or window frame. You’ll usually find a model/series code, a size (often in inches), and a date. Write those down before anyone quotes you anything.
The real compatibility trap with Barrette modular components is that nominal sizes don’t always equal published rough-opening sizes. A panel or framed unit sold as a given size can require a rough opening that’s a fraction larger to allow for shimming, flashing tape, and the California climate seal. Get that wrong and you’re re-framing the hole after the wall is open. We measure the rough opening in place, not from a catalog sheet, and we compare your label against current Barrette specs before ordering. On the OEM-or-aftermarket question: for a licensed, inspected addition, we recommend OEM-spec or certified-compatible parts where the structure and envelope are involved. An aftermarket window or door can work fine if the rated specs match what the permit requires. What you don’t do is swap in a part that fits the hole but fails the inspection.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Home Additions & ADU Is Failing
- Cracks in drywall at corners or above doorways. Usually differential settlement or framing movement rather than a cracked “part,” and it needs a look before it widens into a real structural issue. We check the support and the grade around the addition, not just the drywall.
- Water stains on ceiling or along the wall-to-floor transition. Often a failing flashing detail or a door/window seal that’s aged out. In Glendale’s hot summers and wet winters, caulk and weather-sealing take a beating and can let water track in before you see it.
- Doors or windows that stick, warp, or won’t latch cleanly. A Barrette window or door that’s hard to close is telling you the frame has shifted or the seal has failed. That’s a real diagnostic clue, not a hinge fix.
- Musty smell, soft baseboards, or bubbling paint in the ADU. Moisture is getting inside through the envelope. We trace the source before anyone quotes a repair, because a cosmetic patch will just hide a leak that keeps growing.
- Separated seams or gaps at panel joints. If your Barrette system has panel or joint separations, the connection detail has loosened. Re-securing it properly matters more than filling the gap.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full addition, most Glendale projects run $45,000 to $130,000; ADUs run $90,000 to $220,000; a garage conversion runs $30,000 to $80,000. Here’s what drives the number:
- Scope and size. Square footage and how much of the addition you’re redoing versus repairing.
- Whether the permit is open or needs pulling. We pull permits and get inspections signed on every eligible job. If a previous job was done without permits, we sort that out before work starts.
- Parts and materials. OEM-spec or certified-compatible components, plus any framing or envelope repair. We show you the line item, not a lump sum.
- Access and site conditions. Tight lots and older Glendale properties have surprises. Every price change arrives as a written change order before we touch a nail.
Our crew members have up to 28 years of experience, and the work is backed by the 90-Day Done Right Promise, written on the contract. If it’s not done right, one call brings us back.
DIY or Call Us?
Some things you can safely check: read the manufacturer label, measure the rough opening, note where water is coming in, and photograph the cracks. That’s useful information for anyone who quotes you. But structural and envelope work on a home addition is where DIY goes wrong. A mis-sized rough opening, a flashing detail done wrong, or a part that doesn’t meet the permit spec will cost more to undo than to have built right. There’s a real safety side too: moving framing, working at height, and anything that changes the structure should be done by a trained crew, not a weekend. If your Barrette addition or ADU is showing symptoms, call (844) 560-4526 for a free estimate. We’ll scope it in writing, allowances in writing, change orders in writing.
FAQs
How long does a Barrette home addition or ADU last in Glendale?
With proper installation and maintenance, additions can last decades; the parts that fail first are the seals, flashing, and door/window components, which typically need attention well before the structure does. Glendale’s heat and wet-season cycles wear those details faster than the frame. Call (844) 560-4526 and we’ll tell you what to expect from your specific setup.
Can it be repaired instead of replaced?
Often yes. Cracks, seal failures, and sticking doors usually point to a repairable detail rather than a failing structural part. We’d rather fix the cause than sell you a full rebuild you don’t need. Call (844) 560-4526 for a free second opinion on any written estimate.
How long does the swap take?
It depends on scope. A localized part or seal repair can wrap in a day or two; a full addition or ADU re-scope is a permitted project measured in weeks. We’ll give you a written timeline before work starts. Call (844) 560-4526 to schedule a free estimate.
How do you source the part?
We match your Barrette label to current manufacturer specs and, for structural and envelope components, use OEM-spec or certified-compatible parts that pass inspection. We don’t carry parts on a truck or keep local stock; we order what your job actually needs. Call (844) 560-4526 and we’ll walk through sourcing.
We also service KraftMaid, Cambria, and Silestone in kitchens and baths that connect to your addition.
Call (844) 560-4526 for a free estimate. We’re owner-operated, licensed and insured, and every price change comes in writing before work starts.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.