Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Kitchen Remodeling: The Glendale Owner’s Guide
Barrette kitchen remodeling in Glendale typically runs $14,000 to $45,000 installed, depending on whether you’re refreshing cabinet fronts and a countertop or reworking the full room, and most of that work is planned and scheduled rather than done in a single visit. The price range holds whether you’re matching a discontinued Barrette cabinet line or starting fresh with a current series. Homeowners usually find us after a part fails: a drawer glides rough and won’t stay shut, a cabinet hinge tears loose from its screw holes, or a laminate door edge lifts after a decade of steam from the dishwasher. By the time the third hinge goes, most Glendale owners are pricing a real fix instead of another tube of wood filler.
Which Barrette Models This Applies To
Barrette made a long run of stock and semi-custom kitchen cabinetry, and the parts that matter most – hinges, drawer slides, shelf clips, toe-kick panels, and door fronts – are not universal across every series. The first job is identifying what you actually have. Pull a drawer all the way out and look at the underside or the back panel for a manufacturer label or a stamped series number; if the label is gone, measure the cabinet box width, the drawer opening height, and the slide length to the nearest sixteenth of an inch. Those three numbers usually narrow it down.
When a Barrette series is discontinued, which happens often on older lines, the exact OEM hinge or slide can be hard to source in the original finish. That’s where the OEM-versus-aftermarket decision lands. A quality aftermarket slide or hinge that matches the mounting pattern and load rating will outlast a brittle original in most cases, and it costs less. A mismatched one will fight you every time you open the drawer. We match by mounting pattern and rated load, not by brand name on the box. Barrett & Sons Construction Glendale is an independent installer and is not affiliated with Barrette; we work with whatever series you have and whatever hardware actually fits it. We also handle KraftMaid, Cambria, and Silestone when a Glendale kitchen is ready for a full change rather than a part swap.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Kitchen Remodeling Is Failing
Hardware and cabinet fronts fail in predictable ways. Here’s what Glendale owners describe when they call:
- Drawers that slide rough or stick halfway. The nylon rollers or ball bearings inside the slide have worn flat, or the slide is out of alignment after the cabinet box swelled in summer humidity. A dry Southern California summer followed by a wet winter cycles wood in and out, and slides take the load.
- Hinges that pull loose and won’t hold a screw. The particleboard or MDF around the hinge plate has crumbled. Over-tightening or a door that got slammed a thousand times strips the screw holes, and no amount of longer screw fixes soft core material for long.
- Doors that hang crooked or rub the frame. The hinge has slipped out of adjustment or the cabinet box has racked slightly. In older Glendale homes, a settling foundation can pull a run of cabinets out of square, and the doors show it first.
- Laminate or veneer peeling at the edges. Moisture from the sink, the dishwasher vent, or a slow leak under the counter gets behind the laminate and lifts it. Once water is behind the edge, the substrate swells and the peel spreads.
- Soft or sagging cabinet bottoms. A heavy stack of plates or a slow drip from above has weakened the shelf or the base panel. This one tends to signal a deeper water problem worth checking before you replace anything.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what kitchen work runs in Glendale, parts and labor together, quoted as a written line-item scope before anything gets ordered:
| Work | Installed range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves you up or down the range: whether the cabinet boxes are sound enough to keep (fronts and hardware only is far cheaper than new boxes), the countertop material, whether plumbing or electrical has to move, and how much of the layout changes. Every scope, every allowance, and every price change arrives as a written change order before the work happens – the allowance that isn’t on paper is a surprise waiting for a date. The work is backed by our written 90-Day Done Right Promise, and eligible jobs get permits pulled and inspections signed.
DIY or Call Us?
Some of this you can safely check yourself. Pull a drawer and read the slide for a part number, measure the opening, tighten a hinge screw that’s only slightly loose, and confirm whether the cabinet box is solid or soft. That saves time on the phone.
Where DIY goes wrong: matching a slide to a mounting pattern you guessed at, forcing a hinge into stripped particleboard, or chasing a soft cabinet bottom that turns out to be an active leak behind the wall. A wrong part ordered online and installed crooked costs more than the right one installed once. Our crew members have up to 28 years of experience matching hardware to what’s actually in the box. If you’re not sure what you’re looking at, call (844) 560-4526 and describe it – a live person answers, day or night.
FAQs
Budget eight to fifteen years for original hinges and slides under daily use, and expect the Southern California swing from dry summer heat to winter moisture to speed up the wear – wood cabinets move, and hardware loosens. Door fronts and boxes typically outlast the hardware by years, which is why a hardware and front refresh often makes more sense than a full replacement. Call (844) 560-4526 for a free estimate on what your kitchen actually needs.
Sometimes, yes. A hinge that’s simply out of adjustment can be re-set, and a slide that’s dirty or slightly misaligned can often be cleaned and realigned. Once the screw holes are stripped or the slide’s bearings are worn flat, replacement is the honest answer – the repair won’t hold. We’ll tell you which you’re looking at before quoting anything.
Replacing hinges and slides across a standard Glendale kitchen usually takes a few hours to a day, and swapping out door and drawer fronts runs longer depending on the count and whether anything has to be ordered. Kitchen installs and full remodels are scheduled projects, not same-day work – we’ll give you a real timeline in writing with the estimate. Call (844) 560-4526 to schedule yours.
We identify your series from a label or by measured dimensions and mounting pattern, then match an OEM part if it’s available or a quality aftermarket equivalent with the same load rating and fit. We don’t claim to stock parts or carry them on a truck – what we do is get the right one and install it correctly. If you’d like a free second opinion on a written estimate you already have, we’re glad to give it.
If your Glendale kitchen has a Barrette part that’s failing, or you’re ready to price a refresh, call Barrett & Sons Construction Glendale at (844) 560-4526 for a free estimate. A live person answers around the clock, pricing comes to you upfront in writing, and every price change is a change order before the work moves. Ask about our published offers: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% senior and veteran discount.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.