Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Bathroom Remodeling: The Glendale Owner’s Guide
We install Boral bathroom remodeling products and tile systems in Glendale, with full bathroom remodels typically running $9,000 – $28,000 installed depending on size and finishes. Boral is best known here for roof tile and manufactured stone, so when a Glendale homeowner calls us about “the Boral part” in a bathroom, it’s almost always a Boral Cultured Stone veneer panel behind the vanity, a manufactured stone tub surround, or a transitioning surface where the veneer is letting go from the substrate.
Owners usually discover it in one of three ways: a sharp tap on the wall that’s shifted from solid to hollow, a hairline shadow along a stone seam, or grout that keeps cracking at the same joint no matter how many times it’s patched. In Glendale’s older housing stock, along Brand Boulevard and up into the Verdugo hills, we see this most on 1990s-era bathroom remodels where the original thinset has hit the end of its service life.
Which Boral Models This Applies To
Boral manufactured stone and cultured stone veneer has been rebranded more than once over the years, and the part number on your box may not match a current SKU. What matters more than the model name is the profile and series. Check the box label or the back of a loose stone for a profile name (Cultured Stone, StoneCraft, Boral Stone) and a stone style (Ledgestone, Drystack, Country Ledgestone). For a bathroom, you’re typically dealing with thin veneer, and that’s the critical spec: thin veneer is roughly 0.75 to 1.5 inches thick and installs over a cement backer board, not full-bed dimensional stone, which needs structural framing. Mixing the two is the most common compatibility failure we see.
On the OEM question: Boral-branded thinsets and adhesives are matched to their stone absorption rates, but a quality modified thinset rated for the same use will perform. We’ve found the mismatch that actually bites homeowners is manufacturer vs. field-cut trim pieces – field-cutting corner pieces from flat stock changes the profile and reads as a repair from across the room.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Bathroom Remodeling Is Failing
- Hollow sound when tapped. The veneer has separated from the thinset or the thinset from the backer board. In a shower area, moisture got behind the stone in the first place.
- Recurring grout cracks at the same joint. Usually a deflection problem – the substrate is moving because it wasn’t screwed to spec, and regrouting just hides it temporarily.
- Efflorescence or white crust at the base. Moisture is wicking through, which in Glendale also happens on south-facing exterior walls that feed a bathroom’s shared framing.
- Loose or shifted stones. Adhesive failure, often where a previous installer skipped the modified thinset for a mastic meant for dry interior use only.
- Dark streaks or water stains on the stone. A sign the waterproofing membrane has failed. This is a rebuild, not a patch.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Boral bathroom remodel in Glendale runs $9,000 – $28,000, depending on square footage, whether you’re keeping the tub, and how much of the existing substrate can be saved. What drives the range: shower size, whether the vanity is new, glass, and the number of linear feet of stone.
A tighter scope – say, a stone tub surround and vanity wall without a full floor and tile replacement – runs closer to $5,000 – $12,000. We break out parts and labor on every written estimate, so you know what the Boral material itself costs versus the installation. Every completed job is backed by the written 90-Day Done Right Promise: if it’s not right, we come back.
DIY or Call Us?
You can safely check a Boral stone installation yourself: tap the wall to map hollow spots, photograph seams, look for efflorescence, and pull the manufacturer’s instruction sheet from the label. What we wouldn’t do yourself is any repair behind waterproofing. Tearing off stone to replace it means rebuilding the membrane, and a bad membrane in a shower will fail again within a year or two. Stone veneer is also heavy, and improper anchoring can pull off the wall – that’s not a weekend repair.
Boral tile and stone work in a Glendale bathroom is one of those jobs where a small mistake shows up six months later, in a leak. Call (844) 560-4526 for a free estimate and a second opinion on any written estimate you already have.
FAQs
A properly installed Boral stone or tile bathroom typically lasts 20 to 30 years if the waterproofing is done right. In Glendale’s dry climate, the failure we see most is at exterior-adjacent walls during the dry season, when wood framing dries and flexes and the substrate moves.
Yes, if the failure is cosmetic and isolated. A single cracked stone at a seam can sometimes be replaced and regrouted. But if there’s efflorescence, hollow-sounding area, or a recurring crack, the waterproofing is compromised and a repair will fail again. Call (844) 560-4526 for a free estimate and a second opinion before you commit to a patch or a rebuild.
A full Boral bathroom remodel in Glendale typically takes one to three weeks for the construction phase, depending on tile and stone quantity, glass lead times, and whether plumbing or electrical has to be moved. A smaller scope like a tub surround runs three to five days.
We source Boral stone and tile direct from the manufacturer and authorized distributors. That means a factory-matched profile and color, not a field-cut substitution. We also service KraftMaid, Cambria, and Silestone bathroom products. We’re an independent service provider and not affiliated with Boral – we install and source the material, and we warranty the install.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.