A Barrett company - serving Glendale, CA

Boral Driveway & Pavers in Glendale, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Driveway & Pavers: The Glendale Owner’s Guide

We install and repair Boral driveway and paver systems throughout Glendale. A full paver driveway install typically runs $7,000 – $18,000 depending on square footage, base prep, and whether old concrete has to come out first. We are an independent service provider and are not affiliated with Boral, but we know their lines well enough to match the right units to your existing field.

Call (844) 560-4526

Most Glendale owners find out something’s wrong the same way. A paver lifts after a rainstorm and water sits in the joint. A corner chips clean off where the driveway meets the apron. Or the whole field starts heaving in one section from the roots of a ficus that was planted too close. The surface looks fine until you kneel down and see sand washing out of the joints, or a paver rocking underfoot when you cross it.

Key Takeaways

  • Boral covers several paver and retaining-wall product families. Match before you buy.
  • Most “failed pavers” in Glendale are actually failed base preparation, not failed units.
  • Piece replacement is common. Full re-base is what actually stops the rocking.
  • We pull a written scope and change order before any tear-out begins.

Which Boral Models This Applies To

Boral’s paver catalog runs across a handful of families and the names you’ll see on a supplier slip or an old invoice matter. Boral Holliston and the classic Boral Pavestone profile are two we see most in older Glendale yards, and the more recent Boral Stoneworks and Boral Brookvale lines show up on installs from the last decade. Boral Horizon retaining wall units sit behind a fair number of hillside driveways off Chevy Chase and up toward Adams Hill.

The compatibility gotcha is this: paver thickness and joint tolerances differ between families. Boral Pavestone runs on a different nominal thickness than some of the slab-profile lines, so a piece from one family often won’t sit flush against a field of another. Measure the actual thickness of a removed paver with calipers, not a tape, and photograph the surface texture and edge bevel. Those three details (thickness, texture, edge profile) let a supplier match the right SKU. The color name alone is not enough, because dye lots shift year to year and a 2024 “Sierra” won’t match a 2016 “Sierra” cleanly.

On OEM versus aftermarket, the honest answer is that OEM Boral pieces match best when you’re repairing a section inside an existing field. For a full new install, premium aftermarket products from Belgard and Techo-Bloc are worth pricing alongside, because they hold up equally well in Glendale sun and come in complementary size profiles. We’ll quote both and let you see the numbers.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boral Driveway & Pavers Is Failing

These are the five symptoms we actually get called about, and what each one is really telling you.

  • Pavers rocking underfoot. The bedding sand has migrated out from under the units, usually from inadequate compaction at install. This is a base failure, not a Boral defect.
  • Sand washing out of the joints after rain. Joint sand in Glendale degrades faster than you’d expect because our dry summers bake the polymer and winter rains flush what’s left. Missing sand means the field has no lateral lock.
  • Chipped or spalled corners at the driveway apron. Vehicle weight loading on a paver that isn’t fully supported below pushes the edge up and cracks it. Happens most where the driveway meets the sidewalk.
  • A section heaving in one spot. Tree roots, an old utility trench that was never properly re-compacted, or expansive clay under the base. Heaving is always the subgrade talking, never the pavers.
  • Efflorescence (white chalky bloom) that won’t scrub out. Moisture trapped under the field pushing mineral salts to the surface. A little is normal; persistent bloom means water isn’t draining and the base is saturated.

Replacement Cost & What’s Included

Here’s what Glendale owners actually pay, installed, with line items in writing before we start:

Job Installed Range
Paver driveway installation $7,000 – $18,000
Paver patio installation $3,500 – $11,000
Concrete driveway installation (as base or replacement) $4,500 – $12,000
Driveway replacement (tear-out and re-pour or re-lay) $5,000 – $14,000
Driveway sealing $250 – $700

The range is driven by three things: square footage, how much existing material has to come out, and whether the subgrade needs correction (tree removal, re-compaction, drainage). We list materials, labor, base prep, and disposal as separate lines on the quote. If the scope changes once we open the base, you get a written change order before any work proceeds. Every job is covered by our written 90-Day Done Right Promise.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Some things you can safely do yourself. Rinse the field, sweep in fresh joint sand on a hot day, and pull a single loosened paver to inspect what’s underneath. If the base is solid and one paver is chipped, swapping that one piece is a weekend task for anyone with a dead-blow mallet and a chisel.

Where DIY goes wrong is deeper than one paver. If your field is rocking across more than a couple of square feet, the base is the problem, and a homeowner-level repair means pulling up the whole section, re-grading, re-compacting in lifts, and re-setting. Getting that wrong is how a driveway that’s been fine for ten years starts heaving in the next rainy season. Add a tree-root situation or a hillside cut and it’s not a homeowner job. Call us at (844) 560-4526 and we’ll walk the driveway with you and tell you straight whether it’s a patch or a re-base.

FAQs

Get a Written Scope Before Work Starts

If your Boral driveway is rocking, heaving, or losing joint sand, the sooner it gets looked at, the cheaper it usually is to fix. Every scope, allowance, and price change comes to you in writing before work moves, every eligible job gets permitted and inspected, and every completed job carries our written 90-Day Done Right Promise. Call Barrett & Sons Construction Glendale at (844) 560-4526 for a free estimate. We answer live, and we’ll walk the driveway with you.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch