Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boxabl Bathroom Remodeling: The Glendale Owner’s Guide
We install Boxabl-compatible bathroom remodeling in Glendale, and a full bathroom typically runs $9,000 – $28,000 depending on what’s being replaced and how far the rough-in has to move. A single failed fixture or finish we can match and swap is usually a same-week job, not a full remodel. Most Boxabl owners here in Glendale figure out something’s wrong the same way: a puddle that keeps coming back under the shower pan, a vanity drawer that stopped closing clean, or a toilet that rocks when you sit down because the flange in the factory floor pan let go.
Which Boxabl Models This Applies To
Boxabl’s bathroom wet wall and fixture layout changed between the earlier Casita builds and the current production run, so the part that fits one doesn’t automatically fit another. Before we quote anything, we measure your shower pan’s exact footprint, the drain centerline from the back wall, and the vanity cabinet depth. Those three numbers tell us what we’re actually dealing with.
Every unit carries a data plate you should photograph: the serial number, build date, and the model designation stamped on the frame near the entry door. That plate is what lets us confirm whether your unit uses the standard 60-inch shower pan or the shorter tray, and whether the vanity sink is a single-hole or widespread drill. If the plate is missing or sun-faded, the measurements alone usually get us there.
On fixtures and finishes, we lean toward quality aftermarket equivalents rather than waiting on a factory part. A standard-name shower valve, a porcelain toilet with a known rough-in, a solid-surface vanity top: these fit the Boxabl envelope and can be sourced and replaced without a six-week wait. Where a true factory match matters, we say so up front. We don’t stock parts and nothing rides on a truck; we source to your serial number. Barrett & Sons Construction Glendale is an independent service provider and not affiliated with Boxabl.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boxabl Bathroom Remodeling Is Failing
Here’s what Glendale owners call us about, and what’s usually behind it:
- Water pooling at the shower base or a soft spot in the pan. The factory pan’s seal to the drain collar is the usual culprit, and a slow leak under a Boxabl floor pan travels farther than you’d expect before it shows.
- The toilet rocks or the base feels loose. The closet flange in the composite floor can work loose, and once it cracks, no amount of re-caulking holds it.
- A vanity drawer or door that swings crooked or won’t stay shut. Light cabinet hardware and hinges take a beating in a small, humid bathroom, and the factory slides wear before the box does.
- Grout lines cracking along the shower wall or floor joint. Glendale’s hot, dry summers and the movement of a factory-built box flex those joints; hairline cracks let water behind the tile.
- The shower valve drips or won’t hold temperature. Cartridge wear, plain and simple, and it’s the cheapest thing on this list to fix early.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Boxabl-compatible bathroom work runs in Glendale. Every quote is line-item, and every price change comes as a written change order before we touch the job.
| Scope | Installed Range |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Shower replacement | $3,000 – $8,500 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Bathroom vanity installation | $800 – $3,000 |
What drives the range: how much of the rough-in has to move, whether the drain has to be relocated, and the finish level you pick. A vanity and toilet swap sits at the low end; a shower pan replacement with new tile and a relocated drain climbs. We pull permits and sign off on inspections on every eligible job, and the whole thing is backed by our written 90-Day Done Right Promise: if it’s not right, Tom comes back.
DIY or Call Us?
Some of this you can safely check yourself. Look for soft spots around the shower base, wiggle the toilet base by hand, photograph the data plate, and note where water shows after a shower. That’s information, not repair.
Where DIY goes wrong is the plumbing. Opening a shower drain, resetting a closet flange in a factory floor, or repiping a valve means working with live water in a tight envelope, and a leak you can’t see under a Boxabl pan does real damage fast. This isn’t a part to guess at. Our technicians have up to 28 years of experience with this kind of work, and we’ll tell you honestly whether it’s a repair or a replacement. Call us at (844) 560-4526 to schedule a free estimate. A live person answers, day or night.
FAQs
How long should a Boxabl bathroom fixture last? A shower cartridge and toilet innards typically give you five to eight years before wear shows, and pans and vanities outlast that if the seals hold. Glendale’s dry heat is hard on caulk and grout, so re-sealing those joints every few years gets you the full life out of them. Call (844) 560-4526 for an exact quote.
Can the part be repaired instead of replaced? Often, yes. A dripping valve is a cartridge swap, and a rocking toilet can sometimes be re-set on a new flange. We diagnose first and repair when repair is the right call rather than selling you a remodel you don’t need. Estimates are free.
How long does the swap take? A valve cartridge or toilet swap is usually a few hours. A shower pan or vanity replacement runs a couple of days once the parts are in hand. We give you a written schedule up front. Call (844) 560-4526 to schedule.
How do you source the part? We start from your serial number and exact measurements, then match to an OEM part if that’s the right fit or a quality aftermarket equivalent when it’s the better call. We don’t keep a parts truck and we don’t guess. Call (844) 560-4526 for a free second opinion on any written estimate you’ve received.
What we install across Glendale also includes KraftMaid, Cambria, and Silestone cabinetry and surface work when your bathroom remodel reaches that stage. Barrett & Sons Construction Glendale is owner-operated, every permit gets pulled, and every price change arrives in writing before a single nail moves. Call (844) 560-4526 for a free estimate.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.