Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Caesarstone Home Additions & ADU: The Glendale Owner’s Guide
We build and install Caesarstone-surfaced home additions and ADUs for Glendale homeowners, and the typical installed range runs $45,000 – $130,000 for an addition, with full ADUs higher. When a Caesarstone surface in an existing addition fails – a cracked slab at the island overhang, a delaminated seam, a ghost ring that won’t come out of a wet bar top – the failure is almost always a support, seam or heat problem in the build under it, not the stone itself. We’ve repaired and rebuilt plenty of these in Glendale: the surface outlasts the framing that holds it, and that’s usually where the story starts.
Which Caesarstone Models This Applies To
Caesarstone quartz is engineered stone – roughly 90 – 93% ground quartz bound in resin – and that chemistry is what makes repair decisions for Glendale additions different from natural stone. The surface lines we most often see in Glendale additions fall into a few families: the Classic and Classico series with their tighter fleck patterns, the Supernatural and Calacatta-style designs with vein movement that has to be book-matched at seams, and the thicker 20mm and 30mm slabs common on waterfall islands and bar tops. Outdoors, only the lines Caesarstone rates for exterior use belong on a patio kitchen or covered ADU bar, and that rating is printed on the slab tag and the technical data sheet.
Identifying the right material starts with the slab label under the counter, then a measurement of thickness and overhang. Get those three – series name, thickness, and overhang dimension – and any competent fabricator can match. There’s no OEM Caesarstone part number for a whole counter; the “part” is a cut slab and a fabricated edge, which is why aftermarket equivalents matter here. Where a color has been discontinued, we match by sample against Cambria, Silestone or a current Caesarstone run rather than pretend a dead SKU is still on a shelf somewhere.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Caesarstone Home Additions & ADU Is Failing
- A crack running out from a corner or cutout. Quartz doesn’t flex like granite, so a sink or cooktop cutout with square inside corners concentrates stress. Those cracks usually trace back to fabrication that skipped radiused corners.
- A seam that’s lifting or turning dark. Seam failure means the adhesive bond broke, often from a dishwasher or wall oven radiating heat into the joint. A seam that reads grey or black has moisture in it.
- Ghost rings or cloudy patches. Heat from a slow cooker, a hot pan set down, or an ADU’s wall oven leaves a dull ring in the resin. It’s cosmetic most of the time and it’s the single most common call we get.
- Sagging overhang on a bar or island. Anything past about a third of the slab thickness unsupported will deflect over time. In a Glendale addition with a raised bar, this shows up as a dip you can feel with a straightedge.
- Edge chipping at the sink or dishwasher opening. Quartz chips rather than dents at a thin edge. Repeated chipping at the same spot usually points to an under-supported span.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A Caesarstone surface replacement inside a Glendale addition runs with our standard countertop pricing, $2,000 – $6,500 for countertop installation, and backsplash work $800 – $2,500 if the new slab changes the wall line. Kitchen island installation, where a failed bar top gets rebuilt with proper corbels, runs $3,000 – $10,000. The full project figures – $45,000 – $130,000 for an addition and $90,000 – $220,000 for ADU construction – cover structure, framing, permit and finish, not just the stone.
What drives the range: slab thickness (30mm costs more than 20mm), edge profile complexity, whether plumbing or an outlet has to move, and whether the cabinet substrate and corbels need rebuilding under the new slab. We price parts and labor as separate lines, so you can see what the slab costs against what the fabrication and install cost. Every price change comes as a written change order before work starts, and the work is covered by our 90-Day Done Right Promise.
DIY or Call Us?
Quartz slab work is not a homeowner job, and the reason is weight and tooling rather than skill. A 30mm slab for a standard island can run well past what two people should lift, and cutting or polishing engineered stone releases silica dust that needs wet-cutting and proper respiratory protection – that’s a genuine health hazard, not a scare tactic. Setting a slab on a cabinet that isn’t dead level, or skipping the corbels on an overhang, guarantees the failure repeats in a couple of years.
What you can safely do yourself: photograph the failure, note the slab label and thickness, check the cabinet run with a 4-foot level, and clean the area. That’s the information we need to quote you honestly. Call us at (844) 560-4526 and we’ll talk through whether you’re looking at a repair or a replacement.
FAQs
Caesarstone quartz typically holds up 15 to 25 years indoors when it’s properly supported and away from direct heat. In a Glendale ADU used as a rental, we see the surface outlast the cabinet hardware and the seam adhesive – those are the parts that go first.
Often yes. Heat rings can be sanded and polished out, and a clean crack can be routed and re-bonded with color-matched epoxy that’s nearly invisible. A cracked or sagging slab over an unsupported span is usually a replacement, because the stone won’t hold the same load again. We’ll tell you honestly which one you’re facing.
A countertop swap is usually a two-day job: template day, then fabrication and install. If the cabinet substrate or an overhang needs rebuilding, add a few days. Building a new addition or ADU around it is a months-long job – permits, framing, inspections, then finish.
We source through licensed slab distributors, matching color, thickness and finish to your existing surface or to a sample if your color has been discontinued. Where a color is gone, we bring samples from Cambria, Silestone or a current line so you can see the match before anything gets cut.
Barrett & Sons Construction Glendale is an independent contractor and is not affiliated with Caesarstone. We install Caesarstone, plus KraftMaid, Cambria and Silestone across the trades.
If your Caesarstone surface in a Glendale addition is cracked, delaminating or heat-damaged, call (844) 560-4526 for a free estimate. We’re a live, local crew, we pull the permits, and we put every price in writing. Estimates are free, and there’s no trip charge inside the county.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.