A Barrett company - serving Glendale, CA

Cambria Home Additions & ADU in Glendale, CA

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Cambria Home Additions & ADU in Glendale: The Owner’s Guide

Cambria quartz inside a new home addition or ADU in Glendale is a finish-and-layout decision, not a “part” you swap out – and the number that matters is $45,000 – $130,000 for a home addition and $90,000 – $220,000 for a full ADU, while a garage conversion runs $30,000 – $80,000. We install Cambria-compatible additions and ADUs across Glendale, pulling permits and signing inspections before anything gets framed. Homeowners usually start this conversation one of two ways: a failing 1950s addition they inherited with a house purchase, or an aging parent moving in and a garage nobody uses. Either way, the Cambria question comes up right after the layout question.

Call (844) 560-4526

Key Takeaways

  • Glendale addition budgets land at $45,000 – $130,000; ADUs run $90,000 – $220,000 depending on size and site.
  • Cambria is a quartz surface, so the real decision is where it goes – kitchen island, bath vanity, outdoor-adjacent counters – not which model to replace.
  • Permits and inspections are not optional on additions in Glendale, and we pull them on every eligible job.
  • Change orders arrive in writing before work moves, not on the final invoice.

Which Cambria Surfaces Fit Which Addition or ADU

Cambria makes quartz slabs, not appliance-style model lines, so “compatibility” here means matching the surface to the room and the use. Published Cambria series include quartz designs like Brittanicca, Ella, Torquay, and Skara Brae; each is sold by slab, and slab dimensions and thickness (commonly 2cm and 3cm) drive what your fabricator can cut. Identify what you have by looking at the underside of the countertop for a Cambria label or the fabricator’s stamp, then measure thickness at the edge and the total run in inches. That tells you whether a new island or vanity can reuse an offcut.

On the OEM-versus-aftermarket question: Cambria is the OEM. There’s no cheaper “equivalent” slab that behaves the same, and installing a lookalike under a Cambria name misleads whoever buys the house later. What you choose instead is the fabricator and installer. Slab selection happens with you at a stone yard or through us; fabrication and templating are the steps that decide whether seams land where you want them. Our crews have up to 28 years of experience setting stone, and every scope and allowance lands in writing before fabrication starts.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Glendale Addition or ADU Layout Is Failing

Additions in Glendale fail on the same handful of points, and Cambria surfaces are a good early tell because quartz doesn’t flex quietly.

  • Hairline cracks at the sink or cooktop cutout. Usually a sub-top that wasn’t properly supported, or a cutout made too tight around the appliance with no room for the slab to move.
  • Seams opening at the island. A framing or subfloor issue underneath, not the quartz itself. Cambria doesn’t shrink; what’s under it moves, especially in an addition built over a slab that cured unevenly.
  • Ponding or staining near a window wall. Glendale’s hot, dry summers and cool winters push wood framing through expansion and contraction cycles. A window wall in an old addition is where that shows up first, and stone nearby takes the water.
  • A garage conversion with counters that never sat level. Garage slabs were poured for cars, not for cabinetry. We see this constantly in Glendale conversions where a prior owner skipped the slab prep step.
  • Permit history that doesn’t match the footprint. The addition is there, the counters are new, and the county record shows neither. That gap costs you at resale and can cost more if an inspector flags it later.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

An addition in Glendale runs $45,000 – $130,000 installed, and an ADU runs $90,000 – $220,000. A garage conversion sits at $30,000 – $80,000. Within those numbers, the Cambria surfaces are a line item, not the whole budget – a kitchen island runs $3,000 – $10,000, countertop installation $2,000 – $6,500, a bathroom vanity $800 – $3,000, a backsplash $800 – $2,500.

What drives you toward the top of the addition range: square footage, foundation work on a hillside lot, and whether the ADU needs a separate utility meter. What drives it down: reusing an existing footprint, staying under the garage conversion cap, and picking standard slab sizes instead of custom runs. Every allowance is written into the contract before we start, and any price change comes as a written change order first. The finished job carries our written 90-Day Done Right Promise – one call and Tom comes back.

DIY or Call Us?

Some of this you can check yourself. Walk the addition’s perimeter and look for cracks at the corners of doorways and windows. Put a level on the floor near the new counters. Pull the permit history for the address online and compare it to what’s actually built. None of that is dangerous and all of it saves you money later.

What you shouldn’t do: remove countertops to inspect framing underneath, cut into a slab to chase a leveling issue, or take on any electrical or plumbing rough-in inside a converted garage. Quartz slabs are heavy, brittle, and sharp when they break, and moving one by hand is how people get hurt. Adding a subpanel for an ADU, running gas to a new kitchen, and touching structural framing are all jobs for a trained crew with a permit pulled. Call (844) 560-4526 and we’ll schedule a free estimate on the addition or ADU itself – not on the parts.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch