Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Kitchen Remodeling: The Glendale Owner’s Guide
We install CertainTeed-backed kitchen remodeling in Glendale, with most full kitchens landing between $14,000 and $45,000 depending on cabinet layout, countertop choice, and whether we’re opening a wall. A typical kitchen remodel takes several weeks from demo to final inspection, not a single day. Most Glendale owners don’t start by shopping for a brand; they start because a cabinet door won’t close, a countertop seam has gone dark, or a backsplash tile has popped loose above the range.
CertainTeed is best known for roofing and gypsum, and its kitchen reach runs through underlayment, backer board, and moisture-resistant drywall systems that sit behind your finishes. When those layers fail, the visible kitchen fails with them. Call (844) 560-4526 for a free estimate and we’ll tell you honestly what’s behind the wall before anyone swings a hammer.
Which CertainTeed Products This Applies To
CertainTeed’s kitchen-relevant products aren’t cabinets or counters. They’re the substrate and moisture-control layers: cement backer board for tile backsplashes and floor tile, moisture-resistant gypsum board for walls near sinks and dishwashers, and underlayment panels under hard flooring. If your kitchen was built or re-tiled in the last fifteen years, one of those is likely CertainTeed. Look for the printed board edge or the back-stamp, usually a purple, green, or blue face paper with a product name and thickness printed along the long edge.
The compatibility catch most Glendale owners miss: backer board thickness has to match the tile and the substrate. A 1/4-inch panel is fine over an existing solid wall for a backsplash, but a floor needs 1/2-inch over a rated subfloor, and swapping one for the other is where tile cracks six months later. We measure the actual board, check the stamp, and confirm the assembly before quoting. We’re an independent contractor and not affiliated with CertainTeed, so if a generic equivalent meets the same ASTM standard, we’ll say so and price both. We don’t stock parts and don’t carry materials on a truck; we source to your exact spec.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CertainTeed Kitchen Remodeling Is Failing
- Tile grout cracking along a backsplash or floor line. Usually movement in the substrate, not the grout itself. If the backer board was fastened to a wall that flexes, no grout will hold.
- Soft or crumbling board behind a sink or dishwasher. Moisture got past the caulk line and the moisture-resistant gypsum has given up. Once gypsum softens, it doesn’t dry back out.
- Tile popping loose above the range. Heat cycling plus a thin or missing backer layer. Glendale’s dry summers and cooler winters push expansion and contraction harder than a coastal climate would.
- Dark stains at a countertop-to-wall seam. Water tracking behind the counter and into the wall cavity. This is the one that usually means opening the wall.
- Uneven floor tile or a hollow sound underfoot. Underlayment delamination or a missed fastener pattern. Hollow spots spread, so catching one early saves the floor.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Glendale, a kitchen remodel runs $14,000 to $45,000. A small kitchen remodel sits at $9,000 to $20,000. Cabinet installation is $4,000 to $13,000, countertop installation $2,000 to $6,500, backsplash installation $800 to $2,500, and a kitchen island $3,000 to $10,000. The range is driven by square footage, whether walls move, tile versus slab, and how much of the old substrate has to come out.
Our quotes are line-item and in writing: demo, substrate and backer, tile or slab, cabinetry, labor, and disposal are each their own row. No allowance moves without a written change order before the work happens. Every eligible job gets permits pulled and inspections signed, and the finished work carries our written 90-Day Done Right Promise. Call (844) 560-4526 for a free estimate and a free second opinion on any written bid you already have.
DIY or Call Us?
You can safely check a few things yourself. Look for the board stamp at an exposed edge, press a rag against a suspect seam to see if it wicks, and note where grout lines have cracked. Photograph it and measure the board thickness.
The part that goes wrong is the removal and re-lay. Cutting out backer board around live outlets, water lines, and a dishwasher junction is where a weekend project turns into a repair bill. Tearing out a substrate can also disturb what it was protecting. We’d rather you not test that yourself. Our technicians have up to 28 years of experience with exactly this kind of tear-out and rebuild. Call (844) 560-4526 and we’ll walk you through what’s safe to check and what isn’t.
FAQs
Properly installed and kept dry, cement backer board lasts decades; moisture-resistant gypsum behind a sink typically gives 10 to 15 years before a failed caulk line starts to compromise it. Glendale’s dry air helps, but one slow leak behind a dishwasher does more damage than humidity ever will. Call (844) 560-4526 if you’re unsure what’s behind your wall.
Sometimes. A hairline grout crack or a small soft spot can often be cut out and patched without touching the rest of the kitchen. Once moisture has spread past a two-foot area, patching usually just delays the replacement. We’ll tell you which one you’re looking at before you spend a dollar.
A backsplash tear-out and re-tile runs a few days; a floor substrate replacement runs closer to a week once set time and inspection are counted. A full kitchen remodel in Glendale is measured in weeks, not days, and we’ll put the schedule in writing. Call (844) 560-4526 to schedule your free estimate.
We source to your kitchen’s actual spec, not to whatever’s closest. We confirm the board thickness, the stamp, and the assembly first, then price the CertainTeed product alongside a comparable equivalent so you can see both. We’re independent and not affiliated with CertainTeed. We also work with KraftMaid, Cambria, and Silestone for cabinets and counters in the same job.
If a Glendale kitchen has a failing layer behind the tile, we want to see it before it becomes a bigger bill. We’re owner-operated, every price change arrives in writing before work starts, and a live person answers the phone around the clock. Call (844) 560-4526 for a free estimate and a straight answer on what’s actually failing.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.