A Barrett company - serving Glendale, CA

CGI Bathroom Remodeling in Glendale, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Bathroom Remodeling: The Glendale Owner’s Guide

Bathroom remodeling built around CGI-compatible fixtures and finishes in Glendale typically runs $9,000 to $28,000 installed, and we schedule it as a planned project with a written scope, not a same-day drop-in. We’re Barrett & Sons Construction Glendale, an independent remodeling company, not affiliated with CGI. We work with the CGI product lines homeowners actually own, match the right components to your existing rough-in and finish, pull the permits, and get inspections signed off.

Call (844) 560-4526

Most Glendale owners don’t set out to remodel. They notice something first: a vanity that’s crept away from the wall, a tub surround that’s flexing underfoot, grout lines that keep coming back after cleaning, or a 1950s bungalow bath in Adams Hill where the shower pan has quietly been leaking into the framing since before anyone in the house was born. The symptom is small. The story behind it usually isn’t. That’s when the phone calls start.

Key Takeaways

  • Installed CGI-based bathroom remodeling in Glendale: $9,000 to $28,000. Small baths land $5,000 to $12,000.
  • We identify the exact CGI series and rough-in dimensions before quoting anything.
  • Permits pulled and inspections signed on eligible jobs. No last-minute price changes.
  • Written change orders before any scope change touches the job.
  • Call (844) 560-4526 for a free estimate. A live person answers, every day.

Which CGI Models This Applies To

CGI covers a lot of ground in bathrooms: vanity cabinets and tops, shower surrounds and pans, tub decks, faucetry, tile, and storage. What matters more than the brand name on the box is the series and the rough-in. CGI vanity runs come in nominal widths like 24, 30, 36, and 48 inches, but actual finished dimensions often vary by a quarter to a half inch from nominal, which is exactly the gap that turns a simple swap into a refit. CGI shower pans are sized to the framed opening, not the tile face, and stepping up from a 30-inch base to a 36-inch base means framing, curb, and drain repositioning.

Before we quote, we do three things: pull the CGI model number off the original packing label or any sticker inside the cabinet or behind the shower valve plate, measure the rough opening at three points (top, middle, bottom) because walls in Glendale’s older homes are rarely plumb, and check the drain type and location against the fixture spec sheet. If we can’t find the model label, we go off measurements and the fixture’s visible profile.

On OEM versus equivalent: for load-bearing and wet-area components – shower pans, valve bodies, drain assemblies – we recommend the OEM CGI part. For decorative elements and non-wet trim, quality aftermarket equivalents are fine and often less expensive. We’ll put both options in the written estimate with the difference spelled out.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Bathroom Remodeling Is Failing

Here’s what owners in Glendale actually call us about, and what each symptom usually means underneath.

  • Grout cracking that comes back after repair. Grout doesn’t crack for no reason. Recurring cracks in a shower floor or wall usually mean movement behind the tile: a rotted subfloor, a loose backerboard, or a pan that’s been flexing under weight. Repointing it is treating the symptom.
  • A soft or squishy shower pan. A pan that flexes underfoot has lost its mortar bed or has water sitting in the framing below. That water is also going somewhere – the joist ends, the subfloor, the wall cavity. It’s the most common hidden cause of a much larger repair.
  • Vanity pulling away from the wall. A gap at the caulk line that wasn’t there a year ago usually means the cabinet was mounted to drywall only, not to studs. In a CGI cabinet run that’s gotten heavy with stone counters, that’s a real structural issue, not cosmetic.
  • Musty smell that doesn’t clear after cleaning. Persistent mustiness in a bathroom with no obvious leaks is usually a failing seal at the pan-to-wall joint or a vinyl floor installed over wet subfloor. Glendale’s dry climate doesn’t prevent this – it hides it, because moisture leaves the surface fast while it sits inside the assembly.
  • Yellow or brown ring around the toilet base. A wax ring that’s given out, or a flange that’s cracked. You can sometimes re-seat the toilet, but a soft subfloor around the base means the ring has been leaking for a while. That’s a subfloor problem now.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed bathroom remodeling in Glendale, priced by scope:

Project Scope Installed Range (Glendale)
Full bathroom remodel with CGI fixtures $9,000 – $28,000
Small bathroom remodel (half-bath or tight full) $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement (tile and pan only) $3,000 – $8,500
Vanity installation with CGI top $800 – $3,000

What drives the range: rough-in condition (is the drain under the old fixture re-usable, or does it need relocation?), substrate condition (tile over a failing pan means the subfloor comes up), tile selection, and fixture tier. We price parts and labor separately on the written estimate so you can see what the CGI fixture costs and what installation into your specific bathroom costs. Allowances are on the estimate in writing before we start. Any change to scope gets a written change order before the work happens. Workmanship is backed by our 90-Day Done Right Promise – if something we installed isn’t right, one call brings Tom back.

DIY or Call Us?

What you can safely do yourself: inspect caulk lines and re-caulk dry joints, check the water shutoff valves under the sink, look behind the toilet for staining on the subfloor, and pull the CGI model label for reference. Those are diagnostic steps, not repairs, and they help us quote faster.

What goes wrong DIY: re-setting a shower pan, moving a drain, replacing a valve body in the wall, or pulling a vanity that was mounted wrong and re-hanging it to studs. These are jobs where the visible fix hides a bigger problem and where a permit is required for inspection to happen. If your home is older, the permit inspection is also the fastest way to catch a framing or drain issue before tile goes back over it. That inspection helps you, even though it’s hard on contractors who cut corners.

If you’ve had a failed shower pan or found hidden rot, that’s beyond a DIY job. Call (844) 560-4526 for a free estimate – we’ll walk through what’s actually there.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch