A Barrett company - serving Glendale, CA
C

CWS Home Additions & ADU in Glendale, CA

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CWS Home Additions & ADU: The Glendale Owner’s Guide

We build and finish CWS home additions and ADU projects across Glendale, and the installed range on a full addition runs $45,000 to $130,000. An ADU is a bigger build, $90,000 to $220,000, and a garage conversion lands between $30,000 and $80,000. This is planned construction, not emergency work, so the schedule is set by permits and inspections, not by a truck rolling up the same day. Barrett & Sons Construction Glendale is an independent contractor and is not affiliated with CWS.

Call (844) 560-4526

Most Glendale owners don’t wake up knowing a structural or systems component failed. They find out when a CWS addition or ADU shows the slow symptoms: a door that won’t latch square, a hairline crack that widens over a winter, water staining where the addition meets the original house, or a room that never holds temperature the way the rest of the home does. If you’re seeing any of that, the page below walks through how we match the right materials and scope to your CWS build and what the fix honestly costs in Glendale.

Key Takeaways

  • CWS additions and ADUs need component matches by build series, not a generic “addition part” from a shelf.
  • Installed ranges in Glendale: addition $45,000 – $130,000, ADU $90,000 – $220,000, garage conversion $30,000 – $80,000.
  • Every eligible job gets permits pulled and inspections signed. That protects you, not us.
  • Calls are answered by a live person, not a voicemail box. Call (844) 560-4526.

Which CWS Models This Applies To

CWS builds additions and ADUs in distinct series, and the parts and assemblies inside them aren’t universal across every line. A foundation tie-in plate, roof-to-wall flashing profile, or window rough-opening spec that fits one CWS series will not fit another. Before we quote anything, we identify your build: pull the plans or permit record from Glendale’s building department if you have them, check the data plate or label on the addition’s mechanical equipment, and measure the actual opening or framing rather than trusting a model number from memory.

On CWS builds specifically, the OEM-versus-aftermarket call matters. CWS-specified flashing and structural connectors are engineered to the assembly they’re part of, and an aftermarket equivalent that’s a quarter-inch off can pass inspection and still leak in five years. Where a true OEM match exists, we use it. Where a quality aftermarket part meets or exceeds the original spec and we can verify that on paper, we’ll tell you so and show you the spec sheet. You get the decision in writing, not a verbal “trust me.”

The rest of the trade materials on a CWS addition or ADU follow the same logic: KraftMaid and Cambria for finished interiors, Silestone where it fits the design, GAF and CertainTeed for roofing, Andersen and Marvin for windows. We name the brand because you can look it up. Ask anyone on your street, or look up Tom Barrett’s published license number yourself before you sign anything.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CWS Home Additions & ADU Is Failing

In Glendale, additions face a specific set of pressures: summer heat that expands roof and framing materials through the day and contracts them at night, and winter rain that finds every gap at the tie-in point where new construction meets the original house. Here’s what we see failing, and why.

  • Hairline cracks widening at the addition-to-house joint. The two structures settle at different rates, and a joint that wasn’t properly flashed or tied flexes with every thermal cycle until it opens. Left alone, that crack becomes a water path.
  • Water staining on the interior ceiling near the roofline. Usually failed flashing or a shingle transition where the addition roof meets the main roof. In Glendale, the winter rain window is short but intense, and a small gap moves a lot of water fast.
  • Doors and windows that stick or won’t latch square. Often framing movement or a rough opening that was never shimmed and sealed correctly. On a CWS ADU, this can also mean the window unit itself has failed its seal.
  • Room that won’t hold temperature. Insulation gaps, a failed seal at the exterior wall, or a mechanical component that’s undersized for the addition’s square footage. Common on CWS garage conversions where the original garage walls weren’t upgraded.
  • Visible separation at the foundation or pier connections. The most serious of the five. It can mean a connector or anchor has failed or was never to spec. Stop and get it looked at by a trained crew, not a weekend project.

If any of these show up in your CWS addition or ADU, a written scope and a second opinion cost you nothing. We offer a free second opinion on any written estimate.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what the work actually runs in Glendale, based on the scope of what fails and what it takes to fix it correctly.

Scope Installed Range (Glendale)
Home addition (full build or major rebuild) $45,000 – $130,000
ADU construction $90,000 – $220,000
Garage conversion (to ADU or finished space) $30,000 – $80,000

What drives the range: the condition of the existing structure, the cost of OEM or spec-matched materials, and, honestly, how much of the original work is sound enough to keep. We don’t guess. You get a written line-item quote, every allowance spelled out, and a written change order before any price change touches the job. The allowance that isn’t on paper is a surprise waiting for a date. Every eligible job includes permits pulled and inspections signed, and every completed job is backed by the written 90-Day Done Right Promise. If it isn’t done right, one call brings Tom back.

DIY or Call Us?

There’s a clear split on a CWS addition or ADU, and we won’t pretend otherwise. You can safely inspect the joint where the addition meets the house, photograph any cracking, note where water stains appear, and check your permits and plans. That information helps us help you faster.

What you should not do yourself: open up the roof, touch structural connectors, or attempt electrical or gas work. These carry real injury and property-damage risk, and no honest contractor will tell you otherwise. Getting them wrong on an addition can mean failed inspection, a rejected permit, and a hidden leak that costs thousands later. If the symptoms point to structure or water intrusion, that’s the moment to stop and get a trained crew out.

Call (844) 560-4526 for a free estimate. A live person answers that line 24/7, and within the county there’s no trip charge.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch