A Barrett company - serving Glendale, CA
C

CWS Kitchen Remodeling in Glendale, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CWS Kitchen Remodeling: The Glendale Owner’s Guide

If a CWS cabinet, door, or drawer component in your kitchen has failed, we install CWS-compatible replacement parts across Glendale, and a typical full kitchen remodel runs $14,000 – $45,000 installed. A single cabinet or drawer part swap usually takes a couple of hours once the right part is on hand. Owners in Glendale usually discover the problem the same way: a soft-close drawer stops closing flush, a hinge snaps loose from the cabinet face, or a door sags until it drags on the frame.

Call (844) 560-4526

CWS boxes and fronts are built to metric specs that shift slightly between production runs, so the part you order online often doesn’t match the one in your kitchen. We measure the actual hinge cup, plate, and rail in your cabinet before we quote anything. That’s the whole reason this page exists.

Which CWS Models This Applies To

CWS sells through several lines, and the hardware inside them changes by series. Framed and frameless boxes use different hinge types, and the drawer system in a mid-line cabinet is frequently not the same as the top-line one. Before you order a part, find the model label: it’s usually stuck inside a sink base or on the back of a drawer box, and it lists the series and production run. Write that down.

The compatibility gotcha we run into most in Glendale is hinge cup depth. Imported CWS fronts can use a 35mm cup with a different screw pattern than the standard US replacement, and a “universal” hinge from a big-box store will fit the door but not hold adjustment over time. That’s how a door ends up sagging again six weeks later.

On OEM versus aftermarket: for hinges and drawer slides, a quality aftermarket equivalent (Blum, Grass, or a matching CWS-spec slide) usually outlasts the original. For custom front profiles and color-matched panels, OEM is the only route that matches. We don’t stock parts and we don’t carry them on a truck, so we order against your model label and measure twice.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CWS Kitchen Remodeling Is Failing

  • Drawer won’t close flush or pops back out. Usually a worn slide or a bent rail, and in CWS boxes it’s often the undermount slide clip, not the box itself.
  • Door sags or rubs the frame. The hinge plate screws have pulled loose from thin particleboard, which happens faster in Glendale’s dry summer air when cabinets dry out and the screw holes tighten and split.
  • Soft-close feature stops working. The damper inside the hinge or slide has failed. It’s a small part, and it’s replaceable without touching the door.
  • Cracks at the hinge cup. Repeated load on a screw that’s too short for the cup depth. This is where a wrong aftermarket hinge does real damage to the door.
  • Drawer box separating at the joint. Glue failure at the dovetail or stapled corner. Sometimes repairable, sometimes the box needs replacing.

Every one of these is a parts-and-alignment problem, not a reason to replace the whole cabinet run. That distinction saves Glendale owners thousands.

Replacement Cost & What’s Included

Here’s what kitchen work runs in Glendale, installed, parts and labor broken out in the written quote before anything starts:

  • Full kitchen remodel: $14,000 – $45,000
  • Small kitchen remodel: $9,000 – $20,000
  • Cabinet installation: $4,000 – $13,000
  • Countertop installation: $2,000 – $6,500
  • Backsplash installation: $800 – $2,500
  • Kitchen island installation: $3,000 – $10,000

What drives the range: cabinet count and box type, whether we’re swapping a full run or aligning a few doors, and whether the countertop has to come off to reach the cabinets behind it. A hinge or slide swap sits at the low end. A full cabinet replacement sits at the top.

Every quote is written line by line, allowances are on paper, and any price change arrives as a written change order before work starts. The completed job carries our 90-Day Done Right Promise, and permits get pulled and inspections signed on every eligible job.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely do a few things: tighten a loose hinge screw with a longer screw of the same gauge, clean out a drawer slide track, and note which doors and drawers are misbehaving. That list helps us quote faster.

Where DIY goes wrong is the swap itself. Undermount slides need the rail set at the exact height or the drawer binds; wrong hinge cup depth cracks the door; and pulling a cabinet to reach a part can disturb plumbing or countertop support. One wrong screw in a CWS door and you’re pricing a new front, not a hinge.

Call (844) 560-4526 and we’ll walk through the symptom with you. Estimates are free.

FAQs

How long do CWS cabinet hinges and slides last? A quality hinge or slide typically lasts 10 to 15 years under daily use, but Glendale’s dry summers shorten that. Cabinet wood dries and the screw holes loosen, so hardware that would last 15 years in a humid climate often fails closer to 8 to 10 here. Call (844) 560-4526 for a free look at yours.

Can the part be repaired instead of replaced? Often yes. A pulled hinge screw can be filled and re-driven, and a soft-close damper can be swapped without replacing the hinge. If the cup is cracked or the drawer box is separating, replacement is the honest answer. Call (844) 560-4526 and we’ll tell you which one you’re looking at.

How long does the swap take? A single hinge or slide replacement is usually done in a couple of hours. A full cabinet-front alignment across a kitchen is a half-day job. We give you the time frame in the written quote. Call (844) 560-4526 to schedule your free estimate.

How do you source the part? We read your CWS model label, measure the hinge cup, plate, and rail, then order a matching OEM part or a quality aftermarket equivalent. We don’t guess from a photo. Call (844) 560-4526 and we’ll get your model number on file.

Why Glendale Owners Call Us

We do CWS-compatible kitchen work across Glendale, and we also install KraftMaid, Cambria, and Silestone when you’re ready to upgrade from a repair to a remodel. We’re an independent service provider and not affiliated with CWS, so the quote we give you is based on your cabinets, not a brand script. Barrett & Sons has been owner-operated since 1998, a live person answers the phone 24/7, and Tom Barrett publishes his name, address, and license number so you can look it up before you sign anything.

Standing offers: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% senior and veteran discount. Every price change comes as a written change order before work happens, and every completed job is backed by the written 90-Day Done Right Promise.

Call (844) 560-4526 to schedule your free estimate in Glendale. We’ll measure your CWS cabinets, quote the part and labor in writing, and tell you straight whether it’s a repair or a replacement.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch