A Barrett company - serving Glendale, CA

Delta Bathroom Remodeling in Glendale, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Delta Bathroom Remodeling: The Glendale Owner’s Guide

A Delta bathroom remodeling job in Glendale typically runs $9,000 – $28,000 when we handle the whole room, and most Delta-related part failures can be priced and scheduled within a single visit. What usually brings a Glendale homeowner to this page is simple: a drippy Delta shower valve, a cartridge that won’t hold temperature, or a handle that spins looser every week. The fix depends entirely on which Delta generation you own, and getting that wrong is where most DIY swaps go sideways.

Call (844) 560-4526

Which Delta Models This Applies To

Delta uses a small number of valve platforms across most of their residential bath line, and the cartridge or trim that fits one often won’t seat in another. The Monitor and Monitor 13/14 series run the RP19804-style pressure-balance cartridge, while the newer Monitor 17 series uses the dual-function RP46463 that lets you set a temperature limit behind the handle. The easiest way to identify yours is to pull the trim plate: the rough-in valve body is stamped with a model number, and the cartridge body usually carries a part number right on the plastic housing.

Measure before you buy. Delta rough-in valves for tub and shower have shifted spacing over the decades, and an older Glendale bathroom with a 1970s-era valve will not accept a modern trim kit without changing the valve body itself. That’s a remodel line item, not a parts line item, and pricing it as one saves you a second trip.

On OEM versus aftermarket: Delta’s own cartridges are the safest match for anything still in production, and quality aftermarket equivalents (Danco, for example) are a legitimate lower-cost option for older discontinued pieces where OEM stock has dried up. Cheap universal cartridges found on auction sites are the one thing we’d steer you away from. They’re the most common cause of a “new” cartridge failing inside a year.

Barrett & Sons Construction Glendale is an independent service provider and is not affiliated with Delta. We install Delta-compatible fixtures and trim as part of full bathroom remodeling in Glendale and the surrounding neighborhoods.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Delta Bathroom Remodeling Is Failing

  • Water won’t fully shut off. That’s usually a worn cartridge seal or a scored valve seat, and it’s the first thing to fail on a pressure-balance cartridge.
  • Temperature drifts between hot and cold. On a Monitor valve this points to a sticking balance spool inside the cartridge, not the water heater.
  • Handle feels loose or grinds when turned. A stripped spline or a cracked retaining nut, and continuing to force it wears the valve stem.
  • Water trickles from the spout with the handle off. A failed diverter or cartridge O-ring, and it’s the most common reason a Glendale owner calls us about a Delta shower.
  • Mineral crust and reduced flow at the head or spout. Hard-water scale, which builds faster in Glendale than most of the county because our water runs harder out of the Colorado River supply.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For a full Delta bathroom remodel in Glendale, expect $9,000 – $28,000 installed, with the range driven by square footage, tile selection, whether the valve body has to be relocated, and whether the job needs a permit. A stand-alone Delta shower cartridge or trim replacement is a much smaller invoice, quoted line-item by line-item: the part, the labor, and any valve seat resurfacing are each priced separately so you can see what you’re paying for.

What pushes a Glendale job toward the top of that range: a tub-to-shower conversion, moving the drain, or discovering during demo that the original valve body is a discontinued platform requiring a full rough-in swap. What keeps it low: keeping the layout, reusing the tub, and a Delta trim kit that drops onto your existing valve.

Every scope change arrives as a written change order before we touch the wall, and the completed work is backed by our 90-Day Done Right Promise in writing on the contract.

DIY or Call Us?

An owner can safely do a few things: shut off the water at the fixture stop, remove the handle and trim plate with a screwdriver, and look for the stamped model number. Replacing a shower cartridge is a routine job for a careful DIYer, but two places go wrong. First, torquing the new cartridge into a valve body that’s 30 years old can crack the body, and a cracked body is a wall-opening repair. Second, shutting off water at the main without a working fixture stop means a flood in a Glendale bathroom while you’re at the hardware store.

If your valve body is older, corroded, or has been patched before, this is the point to call. We carry the right cartridge and the trim on the truck only when we’ve confirmed your model first, and we’ll tell you honestly whether it’s a part swap or a rough-in replacement before any work starts. Call (844) 560-4526 for a free estimate, and a live person answers any hour.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch