A Barrett company - serving Glendale, CA

Delta Driveway & Pavers in Glendale, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Delta Driveway & Pavers: The Glendale Owner’s Guide

Delta’s driveway and paver systems aren’t a single part – they’re a layered assembly of base course, bedding sand, edge restraint, and the surface units themselves, and when one layer fails the symptoms show up at the surface. In Glendale, a full paver driveway runs $7,000 – $18,000 installed, a concrete driveway runs $4,500 – $12,000, and repair-level work on a failed section is priced separately. Owners usually find out something’s wrong the same way: a paver loosens underfoot near the garage apron, or the surface starts draining toward the house instead of the street.

Call (844) 560-4526

Key Takeaways

  • Most Delta hardscape failures we see in Glendale are base and drainage failures, not bad pavers.
  • Edge restraint and bedding sand fail first in our soil and rain pattern; the surface units last far longer.
  • Repairing a failed section is often possible and much cheaper than a full replacement.
  • We’re an independent Glendale contractor, not affiliated with Delta – we source compatible materials and install them correctly.

Which Delta Models This Applies To

Delta hardscape products show up in Glendale on two kinds of jobs: driveway and patio systems sold as a kit with interlocking pavers plus containment edge, and standalone paver units installed over a prepared base. The compatibility questions that matter aren’t model numbers the way a window or cabinet has them – they’re unit dimensions, thickness, and joint width. A standard concrete paver in the Delta line is typically 2⅜ inches thick; thinner units (around 1⅝ inch) are meant for patios and walkways and will shear and crack if a driver rolls over them. If you’re matching an existing drive, measure two things before you buy anything: the paver’s face dimensions and its thickness. Mixing a 60mm unit into a 80mm field creates a visible lip and a weak spot that opens up within a season.

The OEM-versus-aftermarket call is a real one here. Delta-marked units match an existing field exactly, so a repair blends in. A quality aftermarket paver from a brand like Belgard or Techo-Bloc, both of which we install, can match color and size closely enough for a full-lot job and often costs less. For a spot repair on a drive you want to keep, matching the original unit is worth the wait. We also install KraftMaid, Cambria, and Silestone on the interior side, but that’s a different trade – for hardscape, paver brands are what count.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Delta Driveway & Pavers Is Failing

Glendale sits on a mix of clay-heavy soils and decomposed granite, and our wet winters followed by dry summers move that ground more than most homeowners expect. Here’s what a failing Delta driveway or paver system actually looks like, and what’s underneath each symptom:

  • Pavers rocking or settling underfoot. The bedding sand has washed out or the base wasn’t compacted in lifts, so units lose support. In Glendale we see this most on drives with a slope toward the garage.
  • Weeds pushing up through the joints. Joint sand has eroded, leaving gaps that let seed and water in. That’s a maintenance issue until the joints stay empty after a refill, at which point the base is the problem.
  • Water pooling toward the house or garage. The drive has lost its slope to the street, usually because base settlement changed the grade. This is the symptom that does the most hidden damage.
  • Edges spreading or the border unit pushing out. Edge restraint failed or was never properly spiked. Once the edge goes, the field starts to open up from the perimeter inward.
  • Cracks in individual pavers or a concrete slab. Point loads from a heavy vehicle on an undersized base, or a slab poured too thin. In our experience, cracked concrete in Glendale often traces back to a base poured over expansive soil without proper prep.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what Glendale homeowners actually pay, with the range driven by square footage, access, base condition, and whether the old surface has to come out:

Job Installed Range (Glendale)
Paver driveway installation $7,000 – $18,000
Concrete driveway installation $4,500 – $12,000
Asphalt driveway paving $3,500 – $9,000
Driveway replacement $5,000 – $14,000
Driveway sealing $250 – $700
Paver patio installation $3,500 – $11,000

What drives the number: excavation and haul-off, base depth (a driveway needs more than a patio), edge restraint, and whether drainage has to be re-graded. We quote parts and labor as separate lines so you can see what the material costs versus the work. Every eligible job gets permits pulled and inspections signed, and any price change comes as a written change order before we touch the job. The 90-Day Done Right Promise is written on the contract – if it’s not right, Tom comes back.

DIY or Call Us?

Some of this you can check yourself, and some of it will cost you more to fix than to have done right the first time. What’s safe to handle on your own: sweeping sand back into open joints, pulling weeds, and eyeballing where water pools after a rain. That tells you whether the problem is surface-level or deeper.

Where DIY goes wrong: resetting a settled paver without fixing the compacted base under it, because the unit will sink again within a season. Or building up an edge with mortar that cracks the first freeze-thaw cycle. Or re-grading a slope by eye, which sends water toward the foundation. Base prep is the whole game on hardscape, and it’s the part most homeowners can’t see and don’t get right. Call (844) 560-4526 and we’ll tell you honestly whether you’re looking at a sand-and-seal job or a base rebuild – the estimate is free.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch