A Barrett company - serving Glendale, CA

Delta Kitchen Remodeling in Glendale, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Delta Kitchen Remodeling: The Glendale Owner’s Guide

Delta kitchen remodeling in Glendale typically runs $14,000 – $45,000 installed, and yes, we can usually get a crew out the same week you call. But most folks who land on this page aren’t starting from scratch. They’re standing in a kitchen with a Delta cabinet box that’s swelled at the toe kick, a drawer glide that gave out after the tenth slammed shut, or a delta faucet cartridge that drips a thin line across a quartz counter every morning. It starts as one small annoyance. Then the soft-close door won’t catch, the pull-out shelf sags, and the water spot under the sink has quietly become a stain on the cabinet floor.

Call (844) 560-4526

Which Delta Models This Applies To

Delta shows up in kitchens two ways, and knowing which one you have decides everything. The first is Delta faucetry: the single-handle pull-down and pull-out models under the Ashton, Linden, Trinsic, and Essa lines, plus the older 100/200/300 series that still turn up in Glendale homes built in the 1980s and 90s. Those older units take the RP-series cartridge, and the cartridge number stamped on the old part matters more than the faucet’s finish. Pull the handle, look for the model tag under the sink deck, and photograph it before you drive to a parts counter. The finish is cosmetic; the cartridge is compatibility.

The second is Delta cabinetry and hardware: drawer glides, hinges, and pull-out mechanisms. Here the gotcha is hole spacing. European-style hinges use either 32mm or 48mm cup spacing, and a glide from a big-box store with the wrong screw pattern will wallow out a Delta cabinet box on the first install. You can’t un-screw a stripped hole. Match the spacing and the load rating, not the label on the package. We install Delta-compatible cabinetry alongside KraftMaid, Cambria, and Silestone when a kitchen needs more than a hardware fix, and every one of those is a branded material you can look up before you sign.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Delta Kitchen Remodeling Is Failing

  • The faucet drips at the spout when shut off. That’s the cartridge seal, and in Glendale’s hard water, mineral scale chews through it faster than the manufacturer’s chart suggests.
  • A drawer glide sticks or the drawer won’t close flush. Worn glide wheels or a bent track. If the box is swelled from a slow leak, the glide is the symptom, not the cause.
  • Cabinet doors sag at the hinge. Loose hinge screws or stripped cup holes. On older Delta boxes, the particleboard around the hinge can crumble after water exposure.
  • Water stains or soft spots under the sink. A slow drip from the supply line or cartridge is reaching the cabinet floor. This is the one that turns a $180 faucet fix into a $4,000 cabinet job.
  • The pull-out drawer bumps or the soft-close feature quits. The damping mechanism fails first on Delta glides, usually after a few hundred cycles.

Replacement Cost & What’s Included

Faucet cartridge replacement in Glendale runs $150 – $280 installed, with the part and labor itemized on the quote. Drawer glide replacement is $90 – $180 per glide pair. Cabinet installation, when the box itself is beyond saving, is $4,000 – $13,000. Countertop replacement, if the drip damaged a laminate top, is $2,000 – $6,500. None of those numbers move once work starts: every scope and allowance is written, and any price change arrives as a written change order before a single screw goes in.

Work Glendale Range
Faucet cartridge / repair $150 – $280
Drawer glide replacement (pair) $90 – $180
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Full kitchen remodel $14,000 – $45,000
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Swapping a Delta cartridge is a fair DIY job if you’ve shut the water off at the valve and you can get the old cartridge out without forcing it. The trap is the valve underneath: older Glendale homes sometimes have a supply stop that won’t close tight, and then you’re working on a live line. That’s where it stops being a Saturday project. Cabinet hardware is similar: a drawer glide swap is safe and simple, but drilling new hinge holes into a Delta cabinet box can crack the particleboard, and that damage doesn’t come back. When the box is soft to the touch or the floor under the sink is spongy, call us. We’re an independent contractor, not affiliated with Delta, but we know these parts and we install the work to code.

Call (844) 560-4526 for a free estimate. We pull permits on every eligible job, so the inspector signs off before you do. Estimates are free, and the second opinion on any written estimate you already have is free too.

FAQs

Kitchen Remodeling in Glendale, From the Crew That Answers the Phone

Barrett & Sons Construction is the owner-operated, name-on-the-truck alternative to the outfit that quoted one price on the phone and handed you another bill at the door. Founded in 1998, our family runs the crews, every eligible permit gets pulled, and Tommy and the team do the work the way it reads on the contract. Every completed job is backed by a written 90-Day Done Right Promise, and a live person answers the phone 24/7.

Call (844) 560-4526 for a free estimate on Delta kitchen remodeling in Glendale. We’ll walk the kitchen, match your Delta faucet or hardware to the right part, and put the scope and price in writing before any work begins. No trip charge inside the county, and the second opinion on any bid you already have is free.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch