A Barrett company - serving Glendale, CA

Dvele Driveway & Pavers in Glendale, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Dvele Driveway & Pavers: The Glendale Owner’s Guide

We install Dvele-compatible driveway and paver systems in Glendale, and a full paver driveway typically runs $7,000 – $18,000 installed depending on square footage, base prep, and paver selection. We’re an independent contractor and not affiliated with Dvele, so we match your home’s actual driveway assembly to the right materials rather than pushing one brand’s catalog. Most Glendale owners don’t notice a failing driveway all at once. It starts with one paver that rocks when the mail carrier walks up, or a hairline crack that spreads across a concrete apron after a hot week in July.

Call (844) 560-4526

Which Dvele Models This Applies To

Dvele builds modular homes across several plan lines, and the driveway scope usually arrives as a site-work package rather than a factory part. That matters: the driveway isn’t shipped with the house, it’s built on your lot to the specs in your plan set. Pull your Dvele owner binder and look for the site plan or civil sheet. It lists the specified driveway surface (often stamped concrete or a paver system) and the base depth that was called for, typically 4 to 6 inches of compacted Class II base under pavers in our region. If your binder is missing that sheet, measure the driveway footprint and photograph the edge detail where pavers meet the garage slab. Those two pieces tell us what we’re matching. On the OEM-vs-aftermarket question: Dvele doesn’t manufacture pavers, so the “OEM” choice is really about matching the original paver series and color. If your original series is discontinued, we source a close-profile replacement and blend it at a less visible edge so the repair reads as intentional, not patched.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Dvele Driveway & Pavers Is Failing

Here’s what we see walking Glendale driveways, and what’s actually going on underneath:

  • Pavers that rock or shift underfoot. The base under that section has settled or wasn’t compacted in lifts. One rocking paver usually means a soft spot several feet wide, not a single bad unit.
  • Sand washing out of the joints. Joint sand erodes from runoff and our dry-season dust followed by winter rain. Missing sand lets pavers rub against each other and opens the door to weeds and ant colonies.
  • Sunken sections or puddles that linger. Water pooling after a storm means the slope is off or the base has failed. In Glendale, where clay-heavy soils expand and contract with our wet-dry cycle, this shows up fastest along the garage apron.
  • Hairline cracks spreading across concrete. Concrete driveways crack from slab movement and tree roots, common near the mature ficus and jacaranda that shade so many Glendale lots. A crack wider than a credit card usually means the slab needs real repair, not caulk.
  • Efflorescence, or a white chalky bloom. Moisture is migrating through the concrete or mortar and pulling salts to the surface. It’s cosmetic at first but points to a drainage or sealing gap worth fixing before winter.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Glendale, expect a paver driveway installation at $7,000 – $18,000, concrete driveway installation at $4,500 – $12,000, asphalt paving at $3,500 – $9,000, and a full driveway replacement at $5,000 – $14,000. Sealing a sound driveway runs $250 – $700 and is the cheapest way to extend its life. What drives the range: driveway square footage, how much failed base has to be excavated and re-compacted, paver series and thickness, and whether we’re cutting out a section or tearing out to the slab. Every quote is line-item and written, so you see the base prep, the materials, and the labor as separate lines. Our crews have up to 28 years of experience, and the work is backed by our 90-Day Done Right Promise: if something isn’t right, Tom comes back and makes it right with one call.

DIY or Call Us?

Some of this you can check yourself. Walk the driveway and mark rocking pavers with chalk. Sweep sand back into dry joints once a season. Rinse off efflorescence and see if it returns. Where DIY goes wrong: re-setting pavers without fixing the base underneath just means they rock again by spring, and patching a structural concrete crack with tube caulk hides the problem while the slab keeps moving. The real work is base prep, compaction in lifts, and getting the slope right so water leaves your garage, and that’s where a trained crew earns its keep. If your driveway is heaving or pooling, call us at (844) 560-4526 for a free estimate.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch