Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Bathroom Remodeling: The Glendale Owner’s Guide
ECO Window Systems bathroom remodeling in Glendale typically runs $9,000 – $28,000 installed, depending on the scope, fixtures, tile, and whether the job touches plumbing or electrical. We’re an independent service provider and are not affiliated with ECO Window Systems, but we work on these bathrooms regularly and quote them honestly. Most Glendale owners find out something’s off the same way: a shower that won’t drain, a vanity that’s pulling loose from the wall, a tub surround that’s soft behind the tile, or caulk that keeps reappearing with more black behind it each month. That’s the moment you stop guessing and start pricing.
Key Takeaways
- ECO Window Systems bathrooms in Glendale run $9,000 – $28,000 installed, with small bathrooms at $5,000 – $12,000.
- Water damage in tile and frameless glass assemblies rarely shows itself until the drywall behind it swells.
- Every eligible bathroom job we take gets permits pulled and inspections signed.
- Our technicians have up to 28 years of experience, and every scope, allowance, and price change arrives as a written change order before work happens.
Which ECO Window Systems Models This Applies To
ECO Window Systems is best known for its vinyl and aluminum window and door lines, and its bathroom assemblies show up most often in remodeling packages where glass, frameless shower enclosures, and interior doors are matched to the brand. That matters here: when a Glendale owner calls and says “my ECO bathroom,” we need the model line, not just the brand, because the glass thickness, hinge spacing, door track replacement parts, and the rough opening specs vary by series. We confirm the model from the label inside the enclosure frame, the sticker on the interior door panel, or the original invoice in the closing packet.
Here’s the compatibility gotcha most owners miss: older ECO shower door tracks use a 3/8-inch tempered glass panel on a deeper bottom track channel than the current line, and the hardware doesn’t swap across. If you’re replacing rollers, hinges, or a pivot, matching the panel thickness (3/8″ vs 1/2″) and the track profile is the whole ballgame. Where a current ECO part isn’t available, a quality aftermarket equivalent usually works, but only if the glass thickness and pivot spacing are verified first, not guessed. We don’t stock parts and we don’t carry parts on a truck, but we can source the right one and tell you honestly whether it’s worth it. KraftMaid, Cambria, and Silestone show up in the same bathrooms, so we spec against the full job, not just the glass.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ECO Window Systems Bathroom Remodeling Is Failing
- Water pooling at the shower door base. The bottom track seal or a worn door sweep has failed, and water is tracking under the glass. Fix it early and it’s a seal; wait and it’s the drywall behind the tile.
- Hinges that sag or bind. Frameless glass hinges and pivot hardware wear out at the bushings first. Once the panel drops more than a quarter-inch, the hinge is the culprit, not the door.
- Black or pink staining along the caulk line. That’s mold feeding on chronically wet substrate, usually behind a tile or bead that’s been re-caulked twice. The caulk is a symptom, not the problem.
- Soft or springy floor tile near the shower. Water is getting under the tile through failed grout or a missing curb, and the subfloor or backer is absorbing it. This is the point where the job goes from repair to remodel.
- A vanity that rocks or pulls away from the wall. Fasteners working loose against drywall or a shallow stud is common in tighter Glendale baths, where the stud bay is narrower than the cabinet’s mounting rail.
Replacement Cost & What’s Included
A full ECO Window Systems bathroom remodel in Glendale runs $9,000 – $28,000, and a small bathroom remodel runs $5,000 – $12,000. What drives the range: glass and enclosure specs, tile selection, vanity and fixture brands, whether the shower is a walk-in ($4,500 – $12,000) or a tub-to-shower conversion ($3,500 – $10,000), and whether we’re moving plumbing or electrical. A shower replacement alone runs $3,000 – $8,500, and a bathroom vanity installation runs $800 – $3,000.
| Scope | Installed Range |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
Every job is quoted with parts and labor broken out on the estimate, not lumped. Every price change arrives as a written change order before work proceeds. Every completed job is backed by our written 90-Day Done Right Promise, and permits are pulled and inspections signed on every eligible job. Ask for a second opinion on any written estimate and we’ll give you one free.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: look at the glass panel thickness (3/8″ vs 1/2″) before ordering any hardware, confirm the model on the frame label, run a level across the top of a sagging door panel, and re-caulk a joint that’s still clean and dry behind it. What you shouldn’t tackle alone is anything behind the tile or under the floor. Water damage looks cosmetic until you pull a tile and find soft backer board, and a frameless glass panel is heavy and tempered: a dropped panel shatters into a thousand pieces, and a panel that’s off its hinge track can fall on someone. That’s when you call us at (844) 560-4526 for a free estimate.
FAQs
Figure 15 – 25 years for the assembly and 8 – 15 years for the wear items: seals, caulk, hinge bushings, and door sweeps. In Glendale’s dry summers and wet winters, the swing between seasons is what ages the caulk and grout fastest, so expect to re-seal every few years. Call (844) 560-4526 if you want a straight answer on whether yours is repairable or gone.
Often, yes. A shower door with worn rollers or a sagging hinge is a hardware swap, and a vanity pulling away from the wall is a re-mount if the studs are sound. If water has gotten behind the tile or under the floor, repair becomes remodel, and that’s the point where the honest answer is to price the whole job. Call (844) 560-4526 for a free estimate and we’ll tell you which one you’re looking at.
A hardware or vanity swap is typically a one-day job. A full bathroom remodel in Glendale usually runs two to four weeks, depending on tile set time, glass lead time, and inspection scheduling. We give you a schedule in writing up front, and if anything changes, it arrives as a written change order before work proceeds. Call (844) 560-4526 to schedule your free estimate.
We identify the model from the label or invoice, confirm the glass thickness and hardware spacing, then source the OEM part where it’s still made or a quality aftermarket equivalent, and we tell you which one you’re getting and why. We don’t stock parts and we don’t carry them on a truck. Call (844) 560-4526 and we’ll start with the label on your enclosure.
Schedule Your Free Estimate
If your Glendale bathroom is showing any of these signs, or you’re ready to price a full remodel, call Barrett & Sons Construction Glendale at (844) 560-4526. We’re a name you can verify: our technicians have up to 28 years of experience, our crew members are background-checked, and every eligible job gets permits pulled and inspections signed. A live person answers 24/7, we offer a free second opinion on any written estimate, there’s no trip charge inside the county, and we honor a permanent 10% Senior & Veteran discount. Get the free estimate before you sign anything, and ask for the price in writing.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.