A Barrett company - serving Glendale, CA
E

ES Windows Bathroom Remodeling in Glendale, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ES Windows Bathroom Remodeling: The Glendale Owner’s Guide

Bathroom remodeling in Glendale with ES Windows products typically runs $9,000 – $28,000 installed, and we schedule a free written estimate rather than quote a number over the phone. That range covers a full gut of a standard Glendale hall bath: new shower or tub, tile, vanity, lighting, waterproofing, and permits pulled with inspections signed. Most Glendale owners call us when the shower pan starts to flex underfoot, the caulk joint at the wall fails for the third time, or a contractor’s “quick refresh” from a decade ago starts showing water where tile should be dry. If you’ve got an ES Windows shower surround, tub, or fixture sitting in a box or already partway into a failed install, this page is written for exactly that situation.

Call (844) 560-4526

Key takeaways

  • Glendale bathroom remodels: $9,000 – $28,000; small baths $5,000 – $12,000; walk-in showers $4,500 – $12,000.
  • ES Windows compatibility depends on the series and the rough opening, so we measure before we order anything.
  • Every Glendale job gets permits pulled and inspections signed. A bathroom is one of the most-permitted rooms in the house.
  • Price changes come as written change orders before work moves, never as a surprise on the final invoice.

Which ES Windows Models This Applies To

ES Windows builds bathroom products across a range of series, and the part number that matters is the one stamped on the label inside the unit frame, on the tub apron, or on the shower pan’s interior lip. Before we spec a replacement or a remodel around an existing ES Windows unit, we photograph that label and take the rough opening measurements: width, depth, and the drain or valve centerline. Those three numbers decide everything. A shower pan that’s a half inch off the rough opening means a cut tile line, a gap at the curb, or a surround that won’t seat, and that’s the failure we see most often when a homeowner orders a unit online and finds out too late that the “standard” size on the retail site doesn’t match what’s framed in the wall.

For ES Windows specifically, the OEM-versus-aftermarket call is usually straightforward. If the unit is under the manufacturer’s coverage and the failure is a defect, OEM is the right path. If it’s an older series with limited parts availability, a quality aftermarket pan or surround from a measured, verified source is often the practical answer, and we’ll tell you plainly which path fits. We’re an independent provider and not affiliated with ES Windows; we install and service their products because Glendale homeowners ask for them.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ES Windows Bathroom Remodeling Is Failing

The symptoms below are what we find when we open up a Glendale bathroom, listed in the order they typically appear:

  • Tile that flexes or sounds hollow underfoot. Usually the pan or backerboard lost its bond, and water is already working behind the tile. By the time you hear it, the substrate is often soft.
  • Caulk at the tub or shower wall fails within a year of redoing it. Recaulking hides the problem, it doesn’t fix it. Repeating failure usually means movement in the frame or water pushing from behind.
  • Musty smell with no visible leak. In Glendale’s dry climate, a slow weep that never fully dries is the culprit. The moisture sits in the wall cavity and the smell shows up before the stain does.
  • Water staining on the ceiling below. The drain or pan connection is the usual source. This one needs to be opened up, not patched from below.
  • Cracked pan or a soft spot at the drain. A cracked pan lets water into the subfloor, and a soft spot at the drain means the drain flange has separated. Both are structural, not cosmetic.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s how the numbers break down in Glendale, with parts and labor in one figure. We won’t quote you a phone number and change it at the door:

Scope Installed range
Full bathroom remodel $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement $3,000 – $8,500
Vanity installation $800 – $3,000

What moves you up the range: tile selection, whether the drain moves, waterproofing method, and permit and inspection scope. The prices above include the ES Windows-compatible surround or pan, waterproofing, tile, and finish labor. Anything outside that scope arrives as a written change order before we touch a tool. Every job carries our 90-Day Done Right Promise, and it’s written on the contract, not buried in fine print.

DIY or Call Us?

You can safely check a few things yourself: look for the ES Windows label on the unit, press along the shower pan for soft spots, run the shower for ten minutes and watch for water at the base, and check the ceiling below for staining. What we don’t recommend is a DIY tear-out. Bathroom waterproofing is where homeowners get in over their heads. A pan that looks sealed can weep for months before a tile moves, and correcting it means a full rebuild of the shower, not a patch. Water damage behind tile in Glendale moves fast in the dry season because the wall dries unevenly and hides the problem. If you’ve found water where it shouldn’t be, stop and call. A free estimate costs you nothing and tells you exactly what’s behind the wall before you commit to anything.

FAQs

How long does an ES Windows shower or tub last? Expect about 15 to 20 years for a properly installed pan and surround, and shorter if the waterproofing was done poorly or the unit sits on a flexing subfloor. Glendale’s dry air stresses the caulk joints more than a humid climate would, so re-caulking every few years is normal. If yours is pushing 20 and the tile is moving, call (844) 560-4526 for an honest read before it fails.

Can it be repaired instead of replaced? Sometimes yes. A failed caulk line or a single cracked tile is a repair. A soft pan, a leaking drain flange, or water behind the tile is not, no matter how many times it gets patched. We’ll tell you which one you’re looking at on the estimate, and the estimate is free.

How long does the swap take? A shower replacement runs 3 to 5 working days. A full Glendale bathroom remodel runs 2 to 4 weeks depending on tile and inspection scheduling. We give you the schedule in writing before we start, and we tell you when the inspector is coming, because the inspector works for you, not for us.

How do you source the ES Windows part? We identify the series from the label, measure the rough opening, and order from a verified supplier that matches the spec. If the OEM part is discontinued, we show you the aftermarket equivalent and its spec sheet before you decide. Call (844) 560-4526 to schedule your free estimate.

We also install KraftMaid cabinetry, Cambria and Silestone counters when your Glendale project touches the adjoining rooms. Every scope, every allowance, and every price change is in writing before the work begins. Our technicians have up to 28 years of experience, permits get pulled and inspections signed on every eligible job, and a live person answers the phone around the clock. Call (844) 560-4526 to schedule your free estimate in Glendale.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch