A Barrett company - serving Glendale, CA

IKO Kitchen Remodeling in Glendale, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

IKO Kitchen Remodeling: The Glendale Owner’s Guide

IKO kitchen remodeling in Glendale runs $14,000 – $45,000 installed, and the range depends mostly on cabinet layout, countertop material, and whether the walls behind the old kitchen need work. A small Glendale kitchen can land closer to $9,000 – $20,000. We’re an independent service provider, not affiliated with IKO, but we install IKO-compatible systems and match the right parts to your existing build.

Call (844) 560-4526

Most Glendale owners don’t go looking for IKO parts on purpose. They find us after something fails: a cabinet that sags away from the wall along an IKO rail system, a drawer glide that lets go at the tab, or a countertop seam that’s started lifting because the sub-deck under the IKO support system wasn’t shimmed right. The IKO name turns up stamped on the mounting rail or the support bracket, and the homeowner is standing in the kitchen holding a broken piece, trying to figure out what fits. That’s the exact situation this page is written for.

Key Takeaways

  • Installed IKO-compatible kitchen remodeling in Glendale: $14,000 – $45,000 depending on size and finishes.
  • The failure points are almost always at the rail, the glide, or the sub-deck connection, not the finish surfaces.
  • Parts must match IKO series by rail profile and mounting-hole spacing, not just by brand name.
  • We pull permits and pass inspections on eligible Glendale kitchen jobs.
  • Every completed job is backed by our written 90-Day Done Right Promise.

Which IKO Models This Applies To

IKO kitchen hardware shows up in several series, and the part that fits one won’t fit another because the rail profile and mounting-hole spacing changed between generations. If you’re trying to identify what you’ve got, look for the stamped name and a short number on the metal itself, usually on the back of the mounting rail or underneath the support bracket where a flashlight can reach it. Take a photo of that stamp and a second photo of the failed part next to a tape measure.

The compatibility gotcha most Glendale owners hit: two IKO rails look identical at the hardware store but differ by a few millimeters in the channel depth. Buy the wrong one and the glide seats but doesn’t lock, and it pops out the first time the drawer gets loaded. That’s a spec-range question, not a brand-name question.

On OEM versus aftermarket, here’s the honest split. OEM gives you an exact fit and original finish, but availability can lag. A quality aftermarket equivalent from a name you can look up will often hold up just as well for a fraction of the cost, provided the run dimensions match. We don’t stock parts and we don’t carry them on a truck; we identify what you need, order it correctly, and install it when it arrives.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your IKO Kitchen Remodeling Is Failing

These are the symptoms Glendale owners describe when they call. Each one points at a different underlying cause, and knowing which you’re looking at saves you from buying the wrong part.

  • Cabinet face pulling away from the wall – usually the IKO mounting rail has lost its anchor into the stud, or the anchor was set into drywall instead of framing. It’s a fastening failure, not a cabinet failure.
  • Drawer glide pops out under load – the glide tab or channel has worn past its tolerance, often because the drawer was overloaded or the rail was never seated fully. You’ll see a small plastic catch worn flat.
  • Squeaking or grinding when a drawer opens – bearings in the glide are shot, or debris has packed into the channel. Squeak that shows up only under weight is the bearing; squeak that shows up every time is the channel.
  • Counter seam lifting or rocking – the IKO sub-deck wasn’t shimmed correctly, and the seam has opened as the cabinet settled. This one compounds: the longer it sits open, the more water gets under the seam.
  • Door sagging at the hinge line – the hinge plate has pulled out of the cabinet face, or the rail has shifted enough that the door no longer sits square. Check the cabinet face for a visible gap against the wall.

If you’re seeing more than one of these at the same time in a Glendale kitchen, that often means the original installation had a fastening or leveling problem, and the parts are working overtime to compensate. Worth a look before you spend money replacing individual glides.

Replacement Cost & What’s Included

Installed pricing for IKO-compatible kitchen remodeling in Glendale:

Scope Installed Range
Full kitchen remodel $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What drives the number: cabinet count and whether the layout moves, countertop material (Cambria and Silestone land higher than laminate), and whether the wall framing needs correction before cabinets go back in. Parts and labor are shown separately on the quote so you can see exactly what the hardware costs versus what the install costs.

Every scope, every allowance, every price change arrives in writing before work happens. No surprise invoice at the end. Permits are pulled on eligible jobs, and the work is covered by our written 90-Day Done Right Promise.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Some of this is safe to check yourself. You can tighten a loose glide, clean out a channel, confirm the part number off the rail stamp, and measure the rail to get the right replacement ordered. That’s a Saturday morning job and worth doing.

Where it goes wrong is at the mounting rail and the sub-deck. Re-anchoring a rail means knowing what’s behind the drywall (stud or no stud) and getting the depth right. Getting the sub-deck shimmed wrong causes the counter seam to open later, and by that point you’ve got a bigger repair. This isn’t dangerous the way a gas line is, but it’s easy to make it worse than it started.

If you’re unsure what’s behind the wall, stop and call. We’ll come out, identify the part, and give you a free written estimate. Call (844) 560-4526.

FAQs

Ready for a Straight Answer on Your IKO Kitchen?

Call (844) 560-4526 for a free estimate. A live person answers, day or night, and you’ll get a written scope with parts and labor shown separately. If your part just needs a repair, we’ll tell you that too. Barrett & Sons Construction Glendale pulls the permits, passes the inspections, and stands behind the work under our 90-Day Done Right Promise. We serve Glendale and the neighborhoods around it, and we’d rather earn the call than rush the quote.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch