Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
James Hardie Driveway & Pavers: The Glendale Owner’s Guide
Barrett & Sons Construction Glendale installs James Hardie-compatible driveway and paver systems across Glendale. Paver driveway work in Glendale runs $7,000 – $18,000 installed, and full driveway replacement runs $5,000 – $14,000, depending on square footage, base prep, and paver selection. We’re an independent contractor and not affiliated with James Hardie. Scheduled installs are quoted with a written line-item scope and change orders in writing before work moves.
Most Glendale owners find out something’s wrong the same way: a paver settles by the garage apron and holds a puddle after the first rain, or a joint flexes when a car rolls over it and the sand starts washing out. James Hardie’s hardscape line is engineered and consistent, which is exactly why a failure usually points to base prep, drainage, or how the system was put down, not the pavers themselves.
Key Takeaways
- Paver driveway installs in Glendale: $7,000 – $18,000. Driveway replacement: $5,000 – $14,000.
- Most early failures trace to base compaction and drainage, not the paver.
- Written scope, allowances, and change orders before any work starts.
- Free second opinion on any written estimate you’ve already got.
Which James Hardie Models This Applies To
James Hardie’s hardscape offering is narrower than its siding line, so start by confirming what you actually have. The product families that show up on Glendale driveways are the Hardie paver profiles and the associated edging and joint components. Look at the pallet label, the underside stamp on a loose paver, and the box tag on the edge restraint. Those three places carry the series, color, and finish.
Once you’ve got the series and the finish name, matching matters more than saving a few dollars. Hardie runs color batches, and a paver pulled from a different lot can sit a shade off beside the originals. That’s the compatibility gotcha most owners hit: the profile matches, the color doesn’t. On a partial repair, we match the finish name and, where it’s feasible, buy from the same batch family so the patch doesn’t read as a patch.
The OEM-versus-aftermarket call is real. For visible field pavers, OEM matching keeps the driveway looking like one install. For edging, joint sand, and base aggregate, quality aftermarket materials do the same job and nobody sees them. We tell you which is which in the written scope. We also handle other premium brands across the trades we touch, including KraftMaid, Cambria, and Silestone indoors. Detailed model identification happens during your free estimate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your James Hardie Driveway & Pavers Is Failing
- Ponding near the garage apron or street cut. Water is pooling because the surface pitch has flattened or the base wasn’t sloped to drain. In Glendale, where the Santa Ana winds dry things fast and then winter rains arrive hard, a flat spot shows up the first wet season.
- Loose or rocking pavers. A paver that moves when you step on it lost its bedding sand or the base under it settled. This is usually the earliest sign and the cheapest one to catch.
- Joint sand washing out. Runoff is carrying the joint sand with it, which points to a drainage problem upslope or a restraint that isn’t holding. Left alone, the joints open and weeds move in.
- Edge restraint lifting or separating. The border is supposed to lock the field in place; when it fails, the whole outer course spreads. That’s a base problem, not a paver problem.
- Color fading and surface wear at the drive lane. Glendale sun is relentless, and the drive lane takes the tire traffic. Fading alone is cosmetic; fading plus rutting means the base is giving up.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Glendale, James Hardie-compatible paver driveway installation runs $7,000 – $18,000. Full driveway replacement, tear-out and all, runs $5,000 – $14,000. Paver patio installation comes in at $3,500 – $11,000 if you’re doing the side yard at the same time. Driveway sealing, which protects the joint sand and finish, runs $250 – $700.
| Scope | Glendale Price Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Driveway replacement (tear-out + rebuild) | $5,000 – $14,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway sealing | $250 – $700 |
What drives the range: square footage, how much base excavation the pitch needs, drainage corrections, and the finish you pick. Every scope, allowance, and price change arrives as a written change order before work happens. That way the number on the estimate is the number on the invoice. Every completed job carries our written 90-Day Done Right Promise.
DIY or Call Us?
You can safely check a few things yourself. Walk the driveway after rain and mark the puddles. Press down on each corner of the pavers along the drive lane to find rockers. Look at the edge restraint and see if it’s still tight to the field. Then measure the total square footage and photograph the pallet label or the underside stamp. That gets you a real quote instead of a guess.
Where DIY goes wrong: pulling up pavers to fix one settles the rest, and re-bedding starts with compacted base material, sloped pitch, and a locked restraint. Get the base wrong and the failure comes back. It’s the same reason the “cheapest” crew usually costs the most. If you’re not sure what you’re looking at, call us at (844) 560-4526 and we’ll tell you straight.
FAQs
Twenty-five to thirty years or more is realistic when the base is built right, drainage works, and the joint sand gets topped up periodically. In Glendale, the killers are undersized base and poor slope to drain, not the paver itself. A well-built system outlasts the driveway it replaced. Call (844) 560-4526 for a free assessment of what you’ve got.
Often yes. Isolated rockers, a failed border, or a single low spot can usually be lifted, re-bedded, and re-sand without touching the whole field. If water is ponding across the whole apron or the base has settled in the drive lane, a full rebuild is the honest answer. We’ll tell you which one you need in writing. Call (844) 560-4526 for a quote.
A targeted repair is typically a one-day job, and a full driveway replacement usually runs two to four days including tear-out, base prep, and sanding. Weather and access affect the timeline. We schedule around your daily use of the driveway and lay it out in the written scope. Estimates are free.
We match by the series, finish name, and batch family from the pallet label or the underside stamp, then source from suppliers who can confirm the lot. Where an exact lot match isn’t available for a partial repair, we’ll say so upfront and quote the alternative. Nothing gets substituted without a written change order. Call (844) 560-4526 for an exact quote.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.