A Barrett company - serving Glendale, CA

James Hardie Kitchen Remodeling in Glendale, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

James Hardie Kitchen Remodeling: The Glendale Owner’s Guide

James Hardie kitchen remodeling in Glendale typically runs $14,000 – $45,000 installed, covering fiber cement wall panels, backsplash prep, cabinetry surrounds, and trim work on a standard kitchen. We install James Hardie-compatible kitchen remodeling throughout Glendale with written scopes and line-item pricing. Barrett & Sons Construction is an independent contractor and is not affiliated with James Hardie.

Call (844) 560-4526

Owners usually don’t come to this page because they were shopping for siding. They come because something behind the kitchen wall failed. A fiber cement panel around a plumbing wet wall has swollen, the paint band at a window return is blistering, or the backsplash substrate is lifting where the countertop meets the panel. Water gets behind fiber cement from a supply leak or a failed sink seal, and Glendale’s dry summers followed by winter rain push that moisture in and out through the panel. The first sign is often a soft spot near the baseboard or a ripple in the paint film. That’s when a part replacement becomes a kitchen question. Call (844) 560-4526 for a free estimate.

Which James Hardie Models This Applies To

James Hardie makes siding, trim, and panel products, not full kitchen systems. So what a Glendale owner actually needs is the correct Hardie product matched to its application: HardiePanel vertical siding for exterior wall sections, HardiePlank lap siding, HardieTrim boards in 3/4″ and 5/4″ thicknesses, and HardieSoffit for overhangs. Inside the kitchen itself, fiber cement is usually not the wall product; the durable surface is generally drywall, tile backer, or a quartz surface. Where owners get confused is replacing an exterior-derived panel around a kitchen window or a bump-out, which is common in Glendale’s older bungalows where the kitchen addition used exterior cladding on a back wall.

To identify the right part: read the back of any removed board for the stamped product name and date code, measure thickness with a caliper (HardieTrim comes in 3/4″ and 5/4″, and half-inch mismatches show at corners), and match the texture finish (smooth, cedarmill, or stucco) before ordering. OEM James Hardie boards come pre-primed and cut to the same dimension; aftermarket “fiber cement” from a big-box store often uses a thinner profile and a different primer coat, which shows as an uneven edge where it meets an existing board. Where a code-required fire-rated assembly is present in a Glendale kitchen addition, only the labeled product passes inspection. If you can’t find the stamp, a photo of the edge profile is usually enough to match it. Call us for a free second opinion on any written estimate before you order a board.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your James Hardie Kitchen Remodeling Is Failing

  • Soft or swollen panel near the sink or dishwasher. This is nearly always a slow supply-side leak or a failed caulk line at the counter junction. The panel absorbs water from the back, and the swelling shows on the kitchen side.
  • Paint blistering along window returns and backsplash edges. Fiber cement that stays wet under paint blisters from the inside out. In Glendale, this shows up first on south- and west-facing kitchen walls where afternoon sun bakes the paint film.
  • Rust stains or dark streaks at panel joints. Fastener corrosion is the cause, and it points to a joint that’s taking on water. Left alone, the fastener head backs out or the joint opens wider each rainy season.
  • Visible cracking along a panel face or corner trim. Fiber cement is dimensionally stable but cracks at rigid joints when the framing behind it moves. A crack on a kitchen bump-out wall usually means the wall assembly is flexing.
  • Gaps opening at caulk lines where the panel meets trim or countertop. That’s shrinkage and movement, not just old caulk. Repainting over it without addressing the joint will fail again within a season.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing in Glendale for James Hardie-based kitchen work falls into these bands, all line-item and written before work starts:

  • Full kitchen remodel with fiber cement wall components, trim, and finishes: $14,000 – $45,000
  • Small kitchen remodel (galley or compact layout): $9,000 – $20,000
  • Cabinet installation: $4,000 – $13,000
  • Countertop installation: $2,000 – $6,500
  • Backsplash installation: $800 – $2,500
  • Kitchen island installation: $3,000 – $10,000

What drives the range: how much of the failed fiber cement panel needs removing, whether the wall framing is sound, whether permits are required (they usually are for structural or plumbing scope in Glendale), and the finish level you choose. We also install KraftMaid and Cambria, plus Silestone, when a job calls for them. Our technicians have up to 28 years of experience.

Every job includes a written scope, written allowances, and a written change order before any price moves. Every eligible job includes permits pulled and inspections signed. If something isn’t done right, the written 90-Day Done Right Promise means one call brings Tom back. Call (844) 560-4526 for a free estimate.

DIY or Call Us?

An owner can safely do the inspection: measure the panel thickness at an exposed edge, photograph the stamp on the back of a removed board, probe a soft spot with a screwdriver handle to check for give, and check the caulk line at the countertop. Those checks are safe and they tell you what part you’re dealing with.

Where DIY goes wrong: replacing a fiber cement panel on a kitchen wall is not a one-person job, and the danger isn’t the board, it’s what’s behind it. Cutting into a wall around a kitchen supply line or an electrical run can cause injury or a costly leak. Installing fiber cement near a wet wall requires the waterproofing layer to be reinstated correctly, and if you skip the flashing detail or the fire-rated assembly on a bump-out, you’re creating a problem the inspector will find later. Fiber cement dust also carries silica, which requires proper respiratory protection. If you don’t have that gear, stop and call us. A free estimate is cheaper than a mistake. (844) 560-4526.

FAQs

How long does James Hardie fiber cement last in a Glendale kitchen? With correct installation and paint maintenance, 30 – 50 years is a realistic service life on a protected wall. The failure point in Glendale kitchens is almost never the board itself; it’s the joint, the fastener, or the water intrusion behind it. Let us look before assuming the panel needs replacing. Call (844) 560-4526 for a free estimate.

Can it be repaired instead of replaced? Often yes. A localized soft spot, a failed caulk joint, or a single cracked panel can be repaired without touching the rest of the wall. The repair still needs the water source addressed first, or it fails again within a season. We don’t recommend patching over an active leak. Call for a free second opinion on any written estimate.

How long does the swap take? A single panel replacement around a kitchen bump-out is usually a same-day job for our crew. A full kitchen remodel with fiber cement components typically takes two to four weeks depending on scope and inspection scheduling. We’ll give you the timeline in writing at the estimate.

How do you source the part? We match the stamped product name and measured thickness against the current James Hardie line, order the specified board and trim, and bring the labeled material to site. We don’t carry parts on a truck or stock them locally; every board is ordered for your job against your measurements. Call (844) 560-4526 to start a free estimate.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch