Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Driveway & Pavers: The Glendale Owner’s Guide
We install and repair Jerith-compatible driveway and paver components in Glendale, with paver driveway installation typically running $7,000 – $18,000 and paver patio work landing between $3,500 and $11,000. Repair-level fixes usually cost far less. We are an independent contractor, not Jerith, but we’ve matched parts to enough Jerith setups around Glendale to know what fails and where to source a correct replacement. Most owners figure out something’s wrong the slow way: a paver rocks when the mail carrier crosses it, a border edge lifts after a rainy season, or a section of driveway starts holding water in a low spot that was never there before. Call (844) 560-4526 for a free estimate before that small failure turns into a full replacement.
Which Jerith Models This Applies To
Jerith builds fencing and outdoor structures rather than paver units directly, so owners who call us usually have Jerith perimeter or gate components working alongside their driveway and paver surface, or a Jerith planter bed or border element sitting at the edge of the driveway. That overlap is where mismatches happen. The easiest way to identify what you have is to check the label or stamp on the underside of a loose cap, post, or border piece, then measure the exposed span and post spacing if a gate or fence line is involved. Older Jerith ornamental aluminum gate and fence lines that run along a driveway are often the part that actually failed, not the pavers themselves.
On the install side, we work with driveway materials from Belgard and Techo-Bloc, both of which pair cleanly with a Jerith perimeter. For any other trade needs you run into, we also handle KraftMaid, Cambria and Silestone work. Whether you go OEM or a quality aftermarket equivalent depends on what broke: genuine Jerith parts give you an exact fit and finish, while an aftermarket match on a small paver-edge or border component can save money without hurting the look. We’ll tell you which way makes sense for your specific setup.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Driveway & Pavers Is Failing
- Loose or rocking pavers. That wobble means the base layer under the paver has shifted or the sand joints have washed out. In Glendale, a dry summer followed by a hard rainy season is enough to open those joints.
- Sunken low spots holding water. Water pooling instead of draining usually points to settled soil or a failed base. Standing water is the fastest way to a bigger repair, so it’s worth catching early.
- Heaving or frost-bitten borders. Even mild Glendale winters can lift a paver border if the edging wasn’t set deep enough. You’ll see the edge sit higher than the field pavers.
- Cracked border or edge pieces. Cracks in the perimeter run to the actual joint where a paver meets a Jerith border or planter base. A single cracked piece there can let the whole edge creep.
- Weeds sprouting from joints. Persistent weeds trace back to joint sand that’s gone, not just a cosmetic nuisance. Once sand is missing, water gets in and the base starts to move.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what fair Glendale pricing looks like for the driveway and paver work that surrounds a Jerith install. Every quote we hand you is line-by-line, so you see the part, the labor, and the materials before you agree to anything.
| Job | Installed Price Range (Glendale) |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway sealing | $250 – $700 |
| Concrete driveway installation | $4,500 – $12,000 |
| Driveway replacement | $5,000 – $14,000 |
What drives the number: square footage, how much base and edging has to be reworked, whether a Jerith border or gate line needs re-setting, and whether we’re patching a section or doing a full replacement. Every scope change arrives as a written change order before work starts, and every job we complete is backed by our written 90-Day Done Right Promise. The part itself is folded into that line-item quote, never billed as a surprise later.
DIY or Call Us?
You can safely check some things yourself. Walk the pavers and listen for hollow or rocking spots, look for joint sand that’s washed out, and photograph any cracked border or Jerith edge piece so we can see what you’re dealing with. Re-setting a full paver base or re-grading a driveway edge is a different story. Pulling base rock, re-laying a bed, and setting the paver so it drains away from the house takes the right tools and an accurate slope, and a driveway that drains toward your foundation causes water damage far beyond the driveway. That’s the kind of job where calling a contractor saves money in the long run. Call (844) 560-4526 and we’ll take a look at the failing section before it spreads.
FAQs
Well-installed pavers and a properly set Jerith border typically hold up for 20 years or more with normal joint-sand maintenance, though Glendale’s dry summers and wet winters mean joint sand needs topping up every few seasons. Resealing every two to three years keeps the surface and the joints tighter. Call (844) 560-4526 for an exact quote on your specific setup, and estimates are free.
Often, yes. A single cracked border piece, a sunken patch, or a washed-out joint can usually be repaired by pulling the affected pieces, re-doing the base in that section, and re-setting. Whole-driveway replacement only becomes necessary when base failure runs across the full area. Call (844) 560-4526 to schedule a free estimate and we’ll give you a straight answer.
A spot repair on a section usually takes a day or less, while a full paver install or replacement can run several days depending on square footage and site access. We’ll confirm the timeline in the written quote before work begins. Call (844) 560-4526 for an exact quote before you commit.
We identify your component by calling the label and measurements from the actual piece you have, then match it to the correct Jerith model or a quality equivalent. We don’t stock parts and we don’t carry parts on a truck, so sourcing is done per job and confirmed in your quote before we order. Call (844) 560-4526 to start, and our experienced crew members will handle the match.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.