A Barrett company - serving Glendale, CA

KraftMaid Bathroom Remodeling in Glendale, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

KraftMaid Bathroom Remodeling: The Glendale Owner’s Guide

We install KraftMaid cabinetry in Glendale bathroom remodels, and most full bathroom projects run $9,000 to $28,000 installed, depending on how much of the room we touch. A single failed part like a drawer glide, hinge, or door is a much smaller job, and we book those into the schedule quickly rather than pushing them weeks out. Most Glendale owners find the problem the same way: a soft-close drawer that slams shut, a vanity door that hangs lower on one corner every month, or a shelf pin that has started letting a cabinet shelf walk out of square. KraftMaid builds quality cabinetry, but its hardware takes a beating in a bathroom where humidity sits high most of the year. If a part has let go, you’re in the right place.

Call (844) 560-4526

Which KraftMaid Models This Applies To

KraftMaid builds cabinets across several lines, and the hardware isn’t the same from one to the next. The cabinet door you have is stamped inside the frame or on the back of the door with a model and finish code. Before you order anything, find that label. It tells us which hinge family and which drawer glide your cabinet takes, and it saves you from buying a part that looks right but won’t seat. KraftMaid uses a proprietary soft-close hinge on many of its painted and stained door lines, and those hinges don’t swap with a generic big-box hinge no matter how similar they look on the shelf. The mounting plate pattern is different. Measuring the door overlay and the cabinet opening matters too, since a 1/2-inch overlay and a 1-1/4-inch overlay take completely different plates. OEM parts are the surest fit. A quality aftermarket glide or hinge can work if it matches the screw pattern exactly, but for a KraftMaid vanity in a Glendale home, sticking with the OEM part avoids a second trip. We’re an independent contractor and not affiliated with KraftMaid; we just know the product.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your KraftMaid Bathroom Remodeling Is Failing

These are the symptoms we see most often on KraftMaid vanities and bathroom cabinets in Glendale. Each one points to a specific failed part, not a vague “the cabinet is going bad.”

  • Drawers that won’t stay closed or slam on their own. A worn glide or a bent glide clip has lost its tension. On older KraftMaid lines the plastic clip cracks first, especially in a humid bathroom.
  • A door that hangs uneven and drags at the bottom. The hinge has loosened from the cabinet face or the hinge itself has fatigued. Screws backing out of particleboard cabinet sides is common once moisture cycles through a few seasons.
  • Soft-close that doesn’t close softly anymore. The dampener inside the hinge or glide has worn out. This is the single most common KraftMaid hardware failure we see, and it doesn’t mean the door or drawer box is bad.
  • A shelf that sags or drops through a pin hole. The shelf pin or the pin hole itself has given way. Enlarged pin holes in a bathroom cabinet usually track back to moisture softening the wood around them.
  • Drawer box out of square or a bottom that sags. The box joinery or the bottom panel has separated. This is more than a hardware swap and needs the box looked at before you order a glide that won’t fix the real problem.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what Glendale homeowners actually pay, installed, for the jobs this page covers. The part itself is usually the smallest line item; labor and the trip to get the fit right make up most of it.

Job Installed Price Range
Single hardware part (hinge, glide, shelf pin) replaced Covered by our $40 Off Any Repair Over $200 offer on qualifying repairs
Bathroom vanity installation (new cabinet) $800 – $3,000
Small bathroom remodel $5,000 – $12,000
Full bathroom remodel $9,000 – $28,000

The range depends on how many parts failed, how many cabinet faces need re-fitting, and whether the cabinet box itself is sound. You get a written line-item quote before we touch anything, and any change to the scope comes to you as a written change order before work continues. The work carries our 90-Day Done Right Promise.

DIY or Call Us?

An owner can safely check a few things. Open the door and look at the hinge plate; if you see vacant screw holes, the screws have pulled out and that’s worth a closer look. Check the drawer glide for cracks in the plastic. You can tighten a loose hinge screw with a screwdriver, and that alone fixes a surprising share of hanging-door complaints. Where DIY goes wrong is ordering the part. A hinge that measures close but not exact will not sit right, and you’ve wasted the order. The bigger issue for us is confidence in the fix: if the cabinet side is soft from moisture, a new part just pulls out again. Call (844) 560-4526 and we’ll tell you straight whether it’s a swap or something more.

FAQs

How long do KraftMaid cabinet parts last in a Glendale bathroom? Hinges and soft-close glides typically last several years and often longer on a low-use vanity, but a Glendale bathroom’s humidity shortens that. Parts that aren’t wiped dry after a shower and sit near a steam source wear fastest. Call (844) 560-4526 with your model and we’ll give you a straight read on replacement.

Can a failed KraftMaid hinge or glide be repaired instead of replaced? Sometimes. A loose hinge with intact screw holes can often be re-seated, and that’s worth trying first. A cracked dampener or a snapped glide clip cannot be repaired and needs replacing. Call (844) 560-4526 and we’ll tell you which you’re looking at.

How long does a KraftMaid part swap take? A single hinge, glide, or shelf pin swap is a short job, usually completed in one visit. A cabinet face re-fit or a few parts across a vanity takes longer. We’ll give you an honest time frame when we quote it. Call (844) 560-4526 to schedule.

How do you find the right KraftMaid part for my cabinet? We start with the model code stamped inside the door or frame, match it to the hinge family and drawer glide your cabinet uses, and confirm the overlay before ordering. We don’t guess from a photo. Call (844) 560-4526 with your label in hand.

We install KraftMaid cabinets and service their hardware across Glendale bathrooms, and we handle Cambria, Silestone, and Kohler alongside them when a remodel is in the picture. Every eligible job is permitted and inspected, and every price change comes in writing before it happens. Call (844) 560-4526 for a free estimate. Our technicians have up to 28 years of experience.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch