Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The Glendale Owner’s Guide
We install and rebuild KraftMaid kitchens in Glendale, and a full kitchen remodel here runs $14,000 – $45,000 installed, with cabinet-focused work landing in the $4,000 – $13,000 range. If you’re reading this because a KraftMaid door, drawer, hinge, or cabinet box has failed on you, you’re in the right place: we match KraftMaid-compatible parts to your exact model line, quote the part and the labor in writing, and schedule the install on a normal working timeline. Most Glendale owners find the problem the same way. A drawer starts dragging at the back. A soft-close door stops catching the last inch and slams. Or a cabinet box swells near the sink and the door no longer sits flush. That’s when the search begins.
Which KraftMaid Models This Applies To
KraftMaid has built cabinetry under several lines over the years, and the part that fits one won’t fit another. Before we order anything, we identify three things: the cabinet series, the door style, and the box construction.
Here’s how we do it in the field. The series is usually stamped on a label inside the cabinet box, often on the back panel or the inside face of a side panel, and sometimes on the underside of a drawer. Door styles have changed names across the years, so a label from a 2009 cabinet may not match a current catalog name even though the hinge pattern is the same. That’s the compatibility gotcha most homeowners hit: matching by door style name alone is unreliable; matching by hinge pattern, door thickness, and box dimensions is what actually works.
- Standard overlay vs. full overlay: hinge position and door gap differ, and a door cut for one won’t close right on the other.
- Box depth and width: KraftMaid boxes come in standard depths (typically 12″ for uppers, 24″ for bases), but shelf pin spacing and drawer glide mounting points vary by series.
- Door thickness: most KraftMaid doors run around 3/4″, but some styles run thinner or thicker, which changes hinge selection.
- Finish family: a replacement door needs to match the aged tone of the rest of the kitchen, not just the original color name.
On OEM versus aftermarket: for visible doors and drawer fronts, OEM or a finish-matched equivalent is usually the right call so the kitchen doesn’t look patched. For internal hardware like hinges and glides, a quality aftermarket equivalent can do the job at a lower price, and we’ll tell you when that’s the honest answer rather than pushing the expensive option.
We’re an independent service provider and not affiliated with KraftMaid. We source KraftMaid-compatible hardware and cabinetry through authorized channels and match parts to your model. We don’t claim to carry stock or keep parts on a truck; parts get ordered to your job after we’ve confirmed the match.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Kitchen Remodeling Is Failing
KraftMaid cabinets hold up well, but Glendale’s dry summers and the occasional wet winter take a toll on wood and hardware. Here’s what we see fail first, and why.
- Doors that no longer close flush. Usually a worn hinge cup or a box that’s swelled slightly at the corner. The hinge screws lose bite, and the door drops a few millimeters.
- Drawers that drag or stick. Drawer glides wear out before the drawer box does. The rollers flatten, the track picks up grit, and the drawer starts pulling hard at the halfway point.
- Soft-close doors that slam. The soft-close mechanism inside the hinge fails, often before the hinge itself. Replacing the hinge usually fixes it.
- Sagging shelves. Shelf pins bend or the pin holes wallow out from the load. A shelf that drops is usually a pin-and-hole problem, not a box problem.
- Swelling or delamination near the sink and dishwasher. Moisture gets into the box edges, the particleboard core swells, and the finish lifts. This is the one that usually means a cabinet box replacement rather than a part swap.
If two or more of these are showing on the same run of cabinets, the kitchen is telling you it’s due for a fuller remodel rather than a single-part fix. We’ll say so plainly rather than sell you parts that don’t solve the real problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what KraftMaid-compatible kitchen work runs in Glendale. These are installed ranges, not phone-quote guesses.
| Work | Installed range (Glendale) |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: how many cabinets are being replaced versus repaired, whether countertops have to come off to get to the boxes, and whether the sink and dishwasher plumbing has to be moved. Parts plus labor are quoted as separate line items so you can see what you’re paying for the part and what you’re paying for the install. Every price change comes to you as a written change order before we proceed. If the job involves electrical or plumbing changes, we pull the permit and the inspection gets signed.
The work is backed by our written 90-Day Done Right Promise. If something isn’t right, one call brings us back.
DIY or Call Us?
Some things you can safely check yourself. Open the door and look at the hinge: if the screws are stripped or the cup is cracked, that’s a swap. Pull a drawer all the way out and look at the glide track: if the rollers are flat or the track is bent, that’s a glide replacement. Those are the easy ones.
Where DIY goes wrong: matching the wrong part. Homeowners buy a hinge that fits the screw holes but not the door thickness, and the door binds. Or they force a glide into a track with a slightly different mount pattern and crack the drawer box. And any cabinet work that touches the countertop, sink plumbing, or electrical (under-cabinet lighting, outlets in a peninsula) needs a permit and a licensed trade. That’s where we come in.
The cheapest path is usually to have us confirm the match on the phone or in person before you buy anything. Call (844) 560-4526 and we’ll tell you what part you need and whether it’s worth doing yourself.
FAQs
KraftMaid cabinet boxes typically last 20 – 30 years with normal use, but hinges and drawer glides are the wear items and often fail in 10 – 15 years. In Glendale’s dry climate, wood cabinets hold up well; the failures we see are almost always hardware or moisture damage near the sink, not structural box failure. If your hardware is failing but the boxes are solid, a hardware replacement is the honest fix.
Often yes. A stripped hinge screw hole can usually be filled and re-drilled. A door that’s dropped can usually be re-hung with a fresh hinge. A drawer glide that’s stiff can sometimes be cleaned and re-lubed. What can’t be repaired is a swelled or delaminated cabinet box, which needs replacement. Call (844) 560-4526 and we’ll tell you which side of that line your kitchen is on before you spend anything.
A single hinge or glide swap is usually a same-visit job, about 30 – 60 minutes once the correct part is in hand. A full set of doors and drawers across a kitchen is usually a half-day to a full day, depending on how many pieces need attention. We order parts to the job after confirming the match, so the timeline is: confirm, order, schedule, install. We’ll give you the dates in writing.
We identify the series and door style from the label inside the box and the physical measurements (hinge pattern, door thickness, box dimensions), then source a KraftMaid-compatible part through authorized channels. Older lines sometimes require a finish-matched equivalent for the door front rather than an exact OEM match. We tell you up front which path we’re taking and what it costs before ordering. For countertop and finish coordination, we also work with Cambria, Silestone, and Kohler.
If your KraftMaid kitchen in Glendale needs a part matched, a cabinet replaced, or a full remodel planned, call Barrett & Sons Construction Glendale at (844) 560-4526 for a free estimate. We’re an independent, owner-operated company. Every eligible job gets permits pulled and inspections signed, every price change comes in writing before work starts, and every finished job is backed by our written 90-Day Done Right Promise. We publish our name, address, and license number, and a live person answers the phone 24/7. Seniors and veterans get a permanent 10% discount, we offer a free second opinion on any written estimate, and there’s no trip charge inside the county.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.