A Barrett company - serving Glendale, CA

KraftMaid Windows & Doors in Glendale, CA

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

KraftMaid Windows & Doors: The Glendale Owner’s Guide

We install and replace KraftMaid-compatible windows and doors in Glendale, and most full window replacement jobs run $4,500 – $15,000 depending on count and frame condition. Impact-rated units, which a growing number of Glendale homeowners want near the foothills, run $8,000 – $25,000. A single failed sash, hinge, or threshold part is a much smaller job, and we’ll tell you straight whether it’s a part swap or a full unit. Call (844) 560-4526 for a free estimate.

Call (844) 560-4526

Most Glendale owners don’t discover a failing window or door part by watching it. They feel it first. A door that drags on the frame in July, a window that won’t latch flush, condensation fogging the inside of the glass, or a draft you can trace with your hand along the sill. Those are the usual first symptoms, and they almost always point to a specific worn component rather than the whole unit.

Key Takeaways

  • Most KraftMaid window and door problems trace to a single worn part: weatherstripping, a hinge, a lock, a threshold, or a failed seal in the glass unit.
  • Full window replacement in Glendale runs $4,500 – $15,000. Impact-rated windows run $8,000 – $25,000.
  • We’re an independent provider. We’re not affiliated with KraftMaid, and we’ll tell you when a part is worth replacing versus when the unit needs to come out.
  • Glendale’s heat and dry Santa Ana wind cycles age seals and weatherstripping faster than a coastal climate does.

Which KraftMaid Models This Apply To

KraftMaid’s window and door line isn’t one product. The components inside a unit change across series, frame material, and the year it was built. Vinyl-frame units, wood-clad units, and aluminum-clad units each use different hinges, different weatherstripping profiles, and different lock hardware. A lock set that fits one series won’t seat correctly in another, and we’ve seen owners buy a replacement from a big-box aisle that looked right and sat a quarter-inch proud of the frame.

The reliable way to identify the right part is by the label. Most KraftMaid units carry a manufacturer’s label on the frame’s inner face or on the sash edge. That label gives you the model number, the date code, and often the glass spec. Photograph it before you order anything. If there’s no label, measure the visible glass, the frame outer dimensions, and the sash thickness, and note the frame material. Those four numbers get you a matching part.

On the OEM-versus-aftermarket question, it depends on the part. For locks and hinges, a genuine OEM replacement is usually the right call because fit and finish matter and the cost gap is small. For weatherstripping and sweeps, a quality aftermarket equivalent matched to the profile is fine and often cheaper. For the sealed glass unit itself, replacement glass has to match the original spec, which means the label matters more than the brand of the replacement glass.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your KraftMaid Windows & Doors Is Failing

  • A door that drags or sticks through the seasons. Glendale’s summer heat expands wood and vinyl frames, and winter contraction pulls them back. If the drag only shows up in July and August, the frame is moving and the hinge or threshold is the likely culprit.
  • Fogging or condensation between the panes. That’s a failed seal in the sealed glass unit, not a dirty window. Once the seal is gone, the glass won’t dry out and the insulating value is done. It’s a glass replacement, not a cleaning.
  • A draft you can feel along the sill or jamb. Weatherstripping flattens with age and UV exposure. The strip loses its spring, the door or sash no longer makes a tight seal, and heat finds the gap. This is one of the most common part failures we see in Glendale homes.
  • A window that won’t latch or lock cleanly. Either the lock hardware is worn or the sash has dropped out of square. If the lock feels mushy or the keeper won’t catch, don’t force it; a misaligned lock is a sign of a deeper alignment issue.
  • Rot or soft spots at the sill or threshold. Wood sills and thresholds hold water when the finish fails, and Glendale’s occasional heavy winter rain finds any gap. Soft wood under a door threshold is a structural warning, not a cosmetic one.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what window and door work runs in Glendale. These are installed ranges, not just part prices, and they include labor, cleanup, and the warranty on our work.

Job Installed Range (Glendale)
Window replacement $4,500 – $15,000
Impact window installation $8,000 – $25,000

What drives the range: how many units, the frame material, whether the opening needs reframing, and whether impact-rated glass is specified. A single sash or lock replacement sits at the low end. A full-house window swap sits at the high end.

What’s included on every job: a written line-item quote that separates parts from labor, the correct OEM or matched equivalent part, cleanup, and the 90-Day Done Right Promise written on the contract. If a part fails inside that window, one call brings Tom back. We pull permits and sign inspections on every eligible job. And if the price moves because we find hidden rot or a misaligned frame, you get a written change order before we touch it. No surprise invoices at the end.

DIY or Call Us?

Some window and door work is safe to check yourself. You can photograph the label, measure the sash, feel for the draft with your hand, and look for soft wood at the sill. Cleaning and re-lubricating a hinge or lock mechanism is fine for most homeowners.

Where it goes wrong is the glass. Replacing a sealed glass unit means handling heavy, fragile glass that can shatter and cut badly, and it means setting it in a frame so the seal and alignment hold. A misaligned sash after a DIY glass swap leaks and voids the unit’s insulating seal. And if you find rot at the sill, that’s structural; it’s not a weekend hardware swap. If the lock won’t latch or the glass has fogged, that’s where we come in. Call (844) 560-4526 for a free estimate.

FAQs

How long should a KraftMaid window or door last? A well-installed unit typically lasts 20 to 30 years, but the parts inside fail sooner. Weatherstripping and sweeps often need replacing in 8 to 12 years, and in Glendale’s dry heat with Santa Ana wind cycles, they can go sooner. The glass unit’s seal is the next common failure. Call (844) 560-4526 for a free estimate on a part or full unit.

Can it be repaired instead of replaced? Often, yes. A dragging door, a worn lock, or flattened weatherstripping is a part repair, not a unit replacement, and it’s far less expensive. Fogged glass means the sealed unit is gone and needs new glass. Soft rot at the sill means the frame needs attention. We’ll tell you which one you’re facing before any work starts, with a written quote. Call (844) 560-4526.

How long does a window or door swap take? A single sash or lock replacement is usually a few hours. A full window unit replacement takes most of a day per unit, and a full-house job runs several days. Weather and permit timing affect the timeline. We’ll give you a written schedule with the quote. Call (844) 560-4526.

How do you source the part? We match the part to the model number and date code on your unit’s label, confirm the frame material and glass spec, then order the correct OEM part or a quality equivalent. If there’s no label, we measure the glass, frame, and sash to get a match. We don’t carry parts on a truck and we don’t stock locally, so the label is what gets the order right the first time. Call (844) 560-4526 for a free estimate.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.

Barrett & Sons Construction Glendale is an independent service provider and is not affiliated with KraftMaid.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch