Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Master Halco Construction in Inglewood, CA | Barrett & Sons Construction Glendale
We install and repair Master Halco fence systems across Inglewood, from galvanized chain-link replacements to vinyl privacy lines on narrow lots. What sets our Master Halco work in Inglewood apart is the ground itself: marine-layer moisture, Santa Ana winds, and decades-old fence footings buried in clay and old concrete all shape how a fence has to be set here. Barrett & Sons Construction Glendale is an independent Master Halco installer, not affiliated with or authorized by the manufacturer. Call (844) 560-4526 for a free estimate.
Why Inglewood Residents Choose Us for Master Halco Service
We’ve installed Master Halco fencing and gate systems across hundreds of Inglewood properties. That covers rusted chain-link tear-outs, vinyl privacy runs on tight lots, and ornamental aluminum gates hung on porches that settled fifty years ago. We know how the galvanized and vinyl lines hold up to the moisture that rolls in off the coast and the dry gusts that come later in the year.
Our crews have up to 28 years of experience, and we work independent of any manufacturer. That means we tell you when a section of Master Halco fence can be repaired instead of replaced, and when it can’t. Every estimate is a written, upfront price with line items, and no scope change moves forward without a written change order first. Permits get pulled and inspections signed on every eligible job. We also honor $40 Off Any Repair Over $200, a Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and a permanent 10% Senior & Veteran discount.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Master Halco Construction Problems We Solve in Inglewood
These are the failures we see most often on Master Halco systems around Inglewood. Most trace back to the climate and the age of the yards.
- Galvanized chain-link white rust and pitting. Marine-layer moisture and winter rains chew at the fabric and posts, worst at ground-line where water pools on Inglewood’s clay soils. Once the post is pitted through at the soil line, that section has to come out.
- Vinyl panels cracked or bowed after Santa Ana winds. Pickets and rails take the hit, especially on exposed corner lots or where posts were set too shallow in expansive soil. Wind-loaded panels that were never set to proper depth fail first.
- Ornamental aluminum gates sagging at the hinges. Many are hung on original 1920s – 1950s garage or porch structures that have settled over the decades. The gate itself is fine; the latch misaligns because the frame behind it has moved.
- Shallow or leaning post footings. Older Inglewood yards often hide buried debris or old concrete from previous fences. A post set into that debris instead of below it will lean within a few seasons.
- Height and setback conflicts on narrow lots. Fence lines run too close to the property line or sit above the local height limit, which stalls the job at inspection. We check the rules before we set a post.
Master Halco Service in Inglewood: What Local Conditions Mean for Your Equipment
Here’s the local detail that changes how a fence gets built in Inglewood: the city’s narrow lots and alley garages mean many Master Halco fence lines have to be set back from the property line to meet fire-access and zoning clearances. On top of that, rear-yard fence height is often limited to 6 feet unless a permit is pulled. That combination trips up DIY installs constantly, and it’s the reason a fence that looks fine on paper can fail at inspection. When we lay out a run along a lot with a rear alley garage, we measure the setback and confirm the height limit before any concrete gets poured, so the finished Master Halco line passes inspection the first time.
Master Halco Models & Products We Service in Inglewood
We work with the Master Halco lines that make sense for Inglewood homes: residential-grade galvanized chain-link systems, vinyl privacy fencing (the Sherwood series and similar), ornamental aluminum fencing (Aero and similar), and the gate hardware and posts that tie them together. On posts, rails, and fabric we use OEM Master Halco components so the wind-load ratings and finish warranties hold up. Aftermarket hinges and latches are fine for gates, provided they match the galvanized or vinyl specs. We don’t carry local stock, so every part is sourced for the specific job.
See the difference
Before
After
Before
After
Before
AfterMaster Halco Service Pricing in Inglewood
Prices below are typical ranges for Inglewood work. Final cost depends on run length, post count, footing conditions, and whether a permit is required.
| Service | Typical Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
| Garage Conversion | $30,000 – $80,000 |
A free estimate includes a walk of the existing fence line, footing inspection, and a written line-item quote. If buried debris or a shallow footing turns up once we start digging, you hear it from us in writing before anything changes. Call (844) 560-4526 for your estimate.
Serving Inglewood, CA – Our Local Coverage Area
We serve Inglewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Master Halco Construction in Inglewood
You may need a permit. Rear-yard fence height in Inglewood is often capped at 6 feet, and taller lines or certain setbacks require one. We confirm the rule for your lot before we set a post. Call (844) 560-4526 for a free estimate that includes the permit check.
It accelerates corrosion. Moisture and winter rains pit the galvanized coating at ground-line where water pools on clay soil. Inspecting that zone each spring and repairing the worst sections early extends the fence’s life. Call (844) 560-4526 if you want a footing and corrosion check.
Vinyl privacy fencing on properly set posts usually works best, because it gives you a clean 6-foot line that respects the setback from a rear alley garage. It also handles the Santa Ana wind load better than a shallow-set panel fence. Call (844) 560-4526 and we’ll walk your lot.
Repair is often the answer. A sagging gate usually means the hinge or the settled frame behind it, not the gate itself. We check the post and frame first, then decide. Call (844) 560-4526 for a free estimate.
Not always, but often a fence line has to be adjusted when an alley garage becomes living space, because of setback and access rules. We check that before the conversion is permitted. Call (844) 560-4526 to talk it through.
Service Areas Near Inglewood
Along with Inglewood, we serve Inglewood service area homeowners and neighbors in Lennox, Westmont, View Park-Windsor Hills, and West Hollywood. If you’re nearby and want to know whether we cover your street, give us a call.
We’re also your source for Master Halco service across the region, and you can read more about our Lennox and Westmont work.
Book Your Master Halco Service in Inglewood Today
Call (844) 560-4526 for a free estimate. A live person answers day or night, every day of the week. We’ll walk your Inglewood fence line, give you a written price, and put the permit and setback questions to rest before any work begins. Every job is backed by our 90-Day Done Right Promise.
Written by the team at Barrett & Sons Construction Glendale.