A Barrett company - serving Glendale, CA

Mighty Buildings Home Additions & ADU in Glendale, CA

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mighty Buildings Home Additions & ADU: The Glendale Owner’s Guide

We build and install Mighty Buildings-compatible home additions and ADUs in Glendale, with completed projects typically running $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU. The price depends on square footage, foundation work, utility runs, and how the panelized sections tie into your existing structure. We’re an independent contractor and not affiliated with Mighty Buildings, so we work from the stamped plans and the factory components themselves rather than a proprietary service agreement.

Call (844) 560-4526

Owners usually call us after something has already gone sideways. A panel joint on that Mighty Buildings addition at the back of a Glendale bungalow starts showing a hairline crack after the first wet winter. A door in the ADU sticks every June. An owner who bought a Glendale house with an unpermitted Mighty Buildings addition discovers the electrical panel was never signed off. That’s typically how the phone call starts.

Key Takeaways

  • Installed addition pricing in Glendale runs $45,000 – $130,000; a full ADU runs $90,000 – $220,000.
  • Mighty Buildings panelized systems have specific tolerances that don’t match conventional stick-framing repairs.
  • Every eligible job gets permits pulled and inspections signed, in writing, before we touch a seam.
  • All pricing and scope arrive as written change orders on signed contracts, backed by the 90-Day Done Right Promise.

Which Mighty Buildings Models This Applies To

Mighty Buildings built its reputation on factory-printed and panelized accessory dwelling units, and the company has offered several product lines over the years: the Mighty House and Mighty Homes product families, the Mighty Mod line, and studio, one-bedroom, and two-bedroom ADU configurations built from its composite panel system. Different product generations use different panel thicknesses, different foundation connection details, and different window and door schedules. That matters more than most Glendale owners expect.

Before we order anything, we confirm four things from your existing structure:

  • Model and serial documentation. Title plates, plan-set cover sheets, or manufacturer labels on panel edges tell us the product generation. If those are missing, the plan set filed with the City of Glendale building department is the fallback.
  • Panel and frame dimensions. The factory composite panels aren’t standard lumber. A replacement section that’s off by an eighth of an inch won’t seat the way the original did, and the joint will telegraph through the finish.
  • Connection hardware schedule. Anchor bolts, straps, and panel-to-panel fasteners are specified per assembly. The wrong anchor for the seismic zone is a permit denial waiting to happen.
  • Utility stub locations. Slug and penetration locations shift between production runs.

The OEM-versus-aftermarket call is different for these systems than for a water heater. Structural connection parts should match the manufacturer’s spec or an engineer-approved equivalent. Windows, doors, cladding trim, and finishes can often come from quality aftermarket suppliers and cost meaningfully less. We tell you which category each part falls into before you commit. For cabinets and stone we also work with KraftMaid, Cambria, and Silestone, and those trade decisions get written out just like everything else.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mighty Buildings Home Additions & ADU Is Failing

These are the five things we see most often on Mighty Buildings structures in Glendale, and what each one usually means.

  • Hairline cracks along panel seams. Panelized systems move as a unit, and differential settlement at one corner concentrates stress at the seams. Left alone, a hairline crack becomes a water path.
  • Doors and windows that stick seasonally. Glendale’s summer heat and dry Santa Ana winds drive wood and composite components to shrink, then swell when the winter rains return. Sticking that changes with the season points to movement in the frame or an anchor backing out.
  • Roof ponding or membrane bubbling on flat sections. The membrane on a flat addition roof has a service life, and the San Fernando Valley gets hot enough in July and August to age it faster than the spec sheet guesses. Bubbling means trapped moisture.
  • Water staining at floor-to-wall junctions inside the ADU. That’s usually a wall base detail that wasn’t caulked correctly when the structure was set, letting rain wick behind the finish.
  • Ground-floor moisture or soft spots. This usually means the foundation vapor barrier or drainage at the perimeter has failed. The foundation connection on a factory panelized unit depends on good drainage, and a Glendale hillside lot with a slope sends water right at it.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A full home addition in Glendale runs $45,000 – $130,000. A full ADU runs $90,000 – $220,000. A garage conversion sits lower, in the $30,000 – $80,000 range, and is a common middle path for owners who want the space without the full new structure.

Scope Installed range
Home addition (per project) $45,000 – $130,000
ADU (per project) $90,000 – $220,000
Garage conversion $30,000 – $80,000

What drives the number: square footage, foundation type and depth on your lot, how far we have to run utility lines from the main, and whether the structure is detached or attached. Within those ranges, the parts-plus-labor split is written line by line. What you see is what you pay.

Every eligible job gets permits pulled and inspections signed. Any scope change is a written change order issued before work proceeds, and the completed work carries the 90-Day Done Right Promise.

DIY or Call Us?

What you can safely check yourself: take photos of hairline cracks along panel seams, measure door and window gaps with a straight edge, and note where the staining shows after a rain. That information helps us quote accurately.

What we don’t recommend doing yourself: panel connection work, foundation anchoring, and any repair that affects structural or seismic performance. These aren’t parts you swap. They’re assemblies with engineer-specified hardware and permit-required inspection. Panel modifications, in particular, can void manufacturer documentation and the city inspection sign-off. A wrong anchor on a Glendale hillside lot is a genuine safety issue, not just a paperwork hassle. Call (844) 560-4526 and we’ll tell you honestly what’s DIY and what isn’t.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch