A Barrett company - serving Glendale, CA

Moen Home Additions & ADU in Glendale, CA

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Moen Home Additions & ADU: The Glendale Owner’s Guide

If you’re planning a Moen-equipped addition or ADU in Glendale, an installed home addition typically runs $45,000 – $130,000, and a full ADU construction runs $90,000 – $220,000. The number moves with square footage, foundation work, and how much plumbing and fixtures you’re specifying. Most Glendale owners start asking about this when their plans call for multiple Moen shower valves, a Moen kitchen faucet, or a Moen tub-and-shower package across a new wing or backyard unit, and they want the fixtures installed right the first time so nothing gets opened back up later.

Call (844) 560-4526

We build these additions with the fixture spec settled before framing, because a Moen rough-in valve that’s set at the wrong depth is a wall you tear into after inspection. Barrett & Sons Construction Glendale is an independent contractor and is not affiliated with Moen. We install Moen fixtures as specified in your plans.

Key Takeaways

  • Installed home additions in Glendale: $45,000 – $130,000. ADUs: $90,000 – $220,000.
  • Moen rough-in valves must be set before drywall. That’s the one call you don’t want to make late.
  • Every eligible job gets permits pulled and inspections signed. Additions and ADUs in Glendale require both.
  • Written change orders before any scope change, every time.

Which Moen Models This Applies To

Moen isn’t a single product line, and the fixture family you choose affects how the plumbing is roughed in and what trim fits at the end. The common residential families we install include the Posi-Temp shower valves (single-handle, pressure-balancing), the M-CORE 3- and 4-series universal rough-in valves, and the widespread and centerset lavatory faucet lines. For kitchen work, Moen’s pull-down and pull-out faucet families are the usual picks. Each has its own rough-in depth, cartridge style, and trim compatibility, so it’s not a case of grabbing whatever box is on the shelf.

To match the right part or trim, look at the model number stamped on the valve body behind the wall plate, not just the handle. A trim kit that fits one Posi-Temp valve won’t fit an M-CORE rough-in, and they look nearly identical from the front. If you’re specifying new fixtures for a Glendale addition, bring the model numbers into the plan review. If you’re replacing a failed cartridge, the valve body number is the one that matters. We don’t carry parts on a truck and won’t pretend to; we source the correct Moen part by model number and install it as part of the job.

OEM vs. aftermarket for Moen

Genuine Moen cartridges and trim are what we install. Aftermarket cartridges are cheaper and often fit, but the tolerances on the internal seals are looser, and in a Glendale addition where a shower valve sits behind tile, a cartridge that fails early costs far more in labor to reach than the part saved. We spec OEM. We also install KraftMaid, Cambria, and Silestone on the finish side of these jobs when the plans call for them.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Moen Home Additions & ADU Is Failing

On an addition or ADU, “the Moen part failing” usually means a fixture or valve installed during the build is now acting up. Here’s what owners report, and what’s behind it.

  • Shower runs hot then cold. A Posi-Temp pressure-balancing cartridge has worn or scaled, so it can’t hold temperature when another fixture draws water. Common in Glendale homes on harder water.
  • Drip at the spout after shutoff. The cartridge seals are worn, a slow leak that wastes water and stains the trim. Usually a cartridge replacement, not the whole valve.
  • Handle turns but no water, or water won’t shut off. The cartridge is seized or the stem is stripped. Behind tile, this is the one that argues for getting the rough-in right the first time.
  • Low flow at the kitchen pull-down. A clogged aerator or a failing diverter in the spray head, often scale buildup.
  • Water staining at the base of a newly built shower wall. A rough-in valve set too shallow or a missing seal at the trim plate. On a Glendale addition, this shows up within the first year and points back to installation depth.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Fixture repair or cartridge replacement inside an existing addition is a small job next to the build itself. The big numbers are the construction: a home addition in Glendale runs $45,000 – $130,000, and an ADU runs $90,000 – $220,000. Those ranges move with square footage, foundation and grading, whether the unit shares a wall with the house, and how many plumbing fixtures and Moen valve sets you’re specifying.

Scope Typical Glendale range
Home addition (full) $45,000 – $130,000
ADU construction $90,000 – $220,000
Garage conversion $30,000 – $80,000

Every scope and allowance is in writing before work starts, and any price change arrives as a written change order before a nail moves. Permits are pulled and inspections signed on every eligible job, and the finished work is backed by our 90-Day Done Right Promise.

DIY or Call Us?

You can safely check a few things yourself: confirm the valve model number, test water pressure elsewhere in the house, and clear a kitchen aerator. What you shouldn’t do is open a wall to swap a shower valve cartridge on a finished addition. Shower valves sit behind tile and waterproofing, and a wrong move there means water intrusion into a wall you just paid to build. That’s not a scare tactic, it’s just how a tiled shower goes back together.

If the fixture is in a light wall or an access panel was left, some cartridge work is straightforward, and we’ll tell you honestly when it is. Where it isn’t, we handle it. Call (844) 560-4526 for a free estimate and a straight answer.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch