Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Kitchen Remodeling: The Glendale Owner’s Guide
Oldcastle kitchen remodeling for a typical Glendale home runs $14,000 to $45,000 installed, depending on cabinet count, countertop material and whether the layout moves. There’s no “same-day swap” here – a kitchen is a planned build, not a parts replacement – but we can usually walk your Oldcastle plan and give you a written number within a few days of the first visit. We’re an independent installer; Barrett & Sons Construction Glendale is not affiliated with Oldcastle.
Most Glendale owners don’t start by shopping a brand. They start because something failed. A cabinet box has swollen at the toe kick after a slow leak. A laminate seam lifted along a countertop edge. A drawer glide snapped and the drawer now hangs crooked by an inch. That’s the moment the questions begin: what’s behind that cabinet, is it Oldcastle, and what does it take to fix it right.
Which Oldcastle Models This Applies To
Oldcastle covers a wide spread of products – cabinet lines, countertops, hardscape, even some masonry and component goods – so the first job is confirming what you actually have. Look for a label or stamp inside a cabinet door, on the back of a drawer box, or under the countertop near an edge. If a sticker is gone, measure the box depth, the door overlay and the glide hole spacing. Those three numbers usually identify the line well enough to match hardware and replacement parts.
Here’s the compatibility gotcha that costs Glendale owners time: Oldcastle cabinet lines have changed hinge and glide patterns over the years, and a hinge that looks identical can sit a few millimeters off on the mounting plate. That small gap is why a “matching” replacement door sometimes hangs proud at the top corner. On the OEM-versus-aftermarket call, we generally recommend genuine hardware for hinges, glides and drawer boxes because the tolerances matter, and a quality aftermarket for faces, panels and trim – a name-brand door with the same overlay works fine and saves real money.
If you’re adding to an Oldcastle kitchen rather than replacing, the box you’re joining to is the constraint. We check the frame thickness, the toe-kick height and the finish before we spec a single piece.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Kitchen Remodeling Is Failing
- Swollen cabinet base or soft toe kick. Water got behind the cabinet from a slow supply-line drip or a dishwasher leak. Particleboard swells and never comes back down – it’s a replacement, not a repair.
- Doors that rub or sit crooked. Worn hinges, or hinges that were swapped with a slightly mismatched plate. A half-millimeter of drift shows up as a rubbing corner.
- Lifted laminate seams or a dull, chipped edge. Inland heat and dry spells in Glendale work laminate seams loose over time. Once water gets under that seam, the substrate goes.
- Drawer glides that stick or snap. Cheap glides fail first. Side-mount ball-bearing glides tend to last noticeably longer than roller style, and that difference shows up as a drawer you can’t close flush.
- Countertop cracks near the sink or cooktop. Cutout corners are stress points. A hairline crack at the sink corner usually means the top was under-supported from the start.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Pricing below is installed, in Glendale dollars, and comes from our standing ranges – not estimates pulled from thin air.
- Full kitchen remodel: $14,000 – $45,000
- Small kitchen remodel: $9,000 – $20,000
- Cabinet installation: $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
What moves the number: cabinet count and line, whether the layout moves (plumbing and electrical), countertop material, and whether existing soffits or flooring come out. Every scope and every allowance arrives in writing before work starts, and any price change comes as a written change order before we touch the job. Our crew members have up to 28 years of experience, and every eligible job gets permits pulled and inspections signed. All of it is backed by the written 90-Day Done Right Promise.
DIY or Call Us?
Some of this is safe to check yourself. You can inspect for water staining, test every drawer and door for rubbing, and photograph a label inside a cabinet. That’s useful information to gather before you call.
Where it goes wrong: cabinet boxes and countertops are heavy, and a cabinet pulled off a wall without proper support can come down on you or tear out drywall. If a countertop has to come off, that’s a two-person, supported job. If any supply line or gas line to the range is involved, stop – that calls for a licensed professional. We’d rather talk you out of a bad idea than fix one. Call (844) 560-4526 and we’ll tell you honestly whether you need us.
FAQs
Fifteen to twenty-five years is realistic for cabinets and countertops if they stay dry, and water is what shortens that. Glendale’s dry summers aren’t the enemy – a slow supply-line drip or a dishwasher leak behind a cabinet is. Fix leaks early and the kitchen lasts; ignore them and the box swells.
Often, yes. A single failed glide or hinge is a swap. A swollen base or a cracked countertop corner is replacement, because particleboard and laminate don’t come back once water is in. We’ll tell you which one you’re looking at before you spend anything.
A single cabinet, glide set or door runs an hour or two. A full cabinet or countertop replacement is a planned job that usually runs several days to a few weeks depending on scope and permits. We give you the schedule in writing up front.
We match your model, measure the box and overlay, and order the correct hardware through supplier channels – we don’t carry parts on a truck. If the exact OEM piece is gone, we spec a quality equivalent that fits your measurements. We also install KraftMaid, Cambria and Silestone where a different line fits your budget better.
Bring us your Oldcastle kitchen and your questions. Call (844) 560-4526 for a free estimate – and if you’ve already got a written quote from someone else, we’ll give you a free second opinion on it. We’re proud to serve Glendale and nearby communities, and we’ll put every scope, allowance and change order in writing before a nail moves.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.