A Barrett company - serving Glendale, CA

Oldcastle Roofing in Glendale, CA

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Oldcastle Roofing in Glendale: The Glendale Owner’s Guide

Oldcastle roof repair or replacement in Glendale typically runs $400 – $1,800 for repairs and $8,000 – $20,000 for a full replacement, and we schedule free estimates within a couple of days of your call. We install and service Oldcastle-compatible roofing throughout Glendale, and we pull the permit on every eligible job. Most owners find us the same way: a brown water stain blooms on a ceiling in the spring, or a shingle tab shows up in the driveway after a Santa Ana wind event, and the roofer who installed the roof is long gone. If that’s where you are, you’re in the right place.

Call (844) 560-4526

Key takeaways:

  • Oldcastle makes a range of roofing products (concrete and clay tile, composition shingle, and some synthetic underlayments), and matching the right part to the right product line is the whole game.
  • Glendale’s sun, occasional hail, and warm inland weather wear roofing parts differently than coastal climates do.
  • Barrett & Sons Construction Glendale is an independent service provider, not affiliated with Oldcastle. We source and install the right part for your roof.

Which Oldcastle Models This Applies To

Oldcastle’s roofing catalog spans several product families, and the name on your roof doesn’t always match the name on the part. Concrete roof tile (their flat, low-profile, and barrel profiles), clay tile, and composition shingles show up on Glendale homes in every style from 1920s Spanish to 1980s ranch. The part you need depends on which system you have, and the systems are not interchangeable.

Start by finding the identification. Tile profiles are marked on the underside of the field tile, usually near a corner or on the headlap. Composition shingle bundles carry the product line and warranty info on the wrapper, and if the original installer left a bundle in the garage or attic, that wrapper is gold. If you don’t have one, a single lifted tile from a low-slope section of roof, photographed with a tape measure against it, tells us the profile and dimensions.

Here’s the decision that matters. On Oldcastle concrete and clay tile, aftermarket equivalents from other manufacturers are often dimensionally compatible but rarely a perfect color match to a weathered field, and the color difference in direct Glendale sun is more obvious than you’d think. On composition shingles, aftermarket is easier to match but the granule color and shadow line can shift. We’re upfront about both. If a true OEM match is what you want, we’ll tell you whether it’s still produced and what shipping timeline looks like. Our crews have up to 28 years of experience reading these roofs, and we’d rather tell you “aftermarket is fine here” than sell you a match you don’t need.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Oldcastle Roofing Is Failing

Roofs fail in a sequence, and catching the early symptoms saves real money. Here’s what to look for, and what each one is actually telling you.

  • Granule loss on composition shingles. Bald patches or granules collecting in gutters mean the shingle’s UV protection is gone. In Glendale’s sun, that happens faster on south- and west-facing slopes.
  • Cracked or slipped tile. A hairline crack in a concrete tile doesn’t leak yet, but a slipped tile exposes the underlayment, which is the actual waterproofing layer. Wind events here slip tiles more than people expect.
  • Ceiling stains or attic moisture. Brown rings on drywall or dampness on rafters point to a breached underlayment or flashing, not always the shingle or tile above it. The failure is often one layer down from where you’re looking.
  • Flashing separation at walls and valleys. Roof-to-wall and valley flashing take more thermal movement than the field does. When the sealant fails, water gets behind the field and travels sideways.
  • Lifted or curling shingle edges. Curling means the shingle has dried out and lost its flexibility. Once several tabs lift along a ridge or eave, the next wind event takes them.

Glendale’s pattern is consistent: south- and west-facing slopes and anything near a valley or wall flashing wear first. That’s where we look on every inspection.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost and What’s Included

For Glendale roofs, here’s the honest range. A roof repair (tile profile match, shingle patch, or flashing rebuild) typically runs $400 – $1,800. A full roof replacement runs $8,000 – $20,000 for a standard single-family home. Tile roof repair sits at $600 – $2,500 because matching and re-bedding tile takes more time than a shingle patch. Metal roofing, if you’re considering it, is $15,000 – $40,000 and is not a like-for-like swap for Oldcastle tile or shingle.

What drives the range: roof size and pitch, how many layers have to come off, whether the decking is sound or has soft spots, and how many penetrations (vents, skylights, chimneys) need flashing. We write the scope, the allowance, and any price change in writing before we start. No surprise invoices at the end. Every permit gets pulled and the inspection gets signed on eligible jobs, and the finished work is backed by our written 90-Day Done Right Promise.

DIY or Call Us?

Some of this is worth checking yourself. Walk the perimeter and look at the roof from the ground with binoculars. Check your attic for daylight, water staining, or damp rafters. Look at gutters after a rain for granules or tile fragments. Those checks are safe and can help you describe the problem before you call.

Getting onto the roof is where DIY goes wrong. Glendale tile and shingle roofs are pitched, and walking on them can crack tile, tear shingles, and put you at real risk of a fall. A fall off a one-story roof is still serious. We say this plainly because we’ve seen the aftermath. If the leak is active or the roof is steep, stay off it and call.

Call (844) 560-4526 for a free estimate. We’ll get a look at the roof, tell you whether a repair or an OEM-versus-aftermarket match is the right call, and put the price in writing.

FAQs

How long does Oldcastle roofing last in Glendale? A well-installed concrete tile roof underlayment needs replacement around 15 – 25 years, and the tile itself can last decades beyond that with careful maintenance. Composition shingles typically run 20 – 30 years, less on hard-sun slopes. Call (844) 560-4526 for a free inspection of your specific roof.

Can a failing Oldcastle roof be repaired instead of replaced? Often yes. A cracked tile, a slipped field tile, or a flashing failure is usually a repair, not a full replacement, and that’s the cheaper and smarter call when the underlayment is still sound. We’ll tell you honestly which one you need. Call (844) 560-4526 for the estimate.

How long does a repair take? Most single-area repairs and tile matching are a one-day visit. Larger flashing or underlayment work can run two to three days. We’ll tell you the timeline in the written scope before we start. Call (844) 560-4526 to schedule.

How do you source the right Oldcastle part? We identify the product family and profile from the roof, check whether the OEM part is still in production, and compare it to dimensionally compatible aftermarket options. Then we tell you what we found, including color and lead-time tradeoffs, before you commit. Barrett & Sons Construction Glendale is an independent provider and not affiliated with Oldcastle. We also work with KraftMaid, Cambria, and Silestone on interior projects. Call (844) 560-4526 for a free estimate.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch