A Barrett company - serving Glendale, CA

PGT Bathroom Remodeling in Glendale, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

PGT Bathroom Remodeling: The Glendale Owner’s Guide

A bathroom remodel built around PGT-sourced fixtures typically runs $9,000 to $28,000 for a full guest or primary bath in Glendale. A small bath can land closer to $5,000 to $12,000, and a walk-in shower on its own runs $4,500 to $12,000. We’re an independent contractor, not affiliated with PGT, and we install the parts and fixtures PGT-modeled systems call for.

Call (844) 560-4526

Most Glendale owners don’t go looking for a PGT bathroom spec until something fails on the fixtures they already own. A shower valve cartridge starts dripping and won’t shut off. A PGT-framed window in the bath fogs from the inside because the seal gave out. The faucet aerator clogs twice a season from Glendale mineral-heavy water. That’s the moment the parts sheet matters: which model you have, what part actually fits it, and what it costs installed rather than shipped in a box.

Which PGT Models This Applies To

PGT doesn’t make one bathroom line. The PGT products that show up in Glendale bathrooms most often come from the window, door, and glazing side of the catalog, paired with bath fixtures from the same specification sheet. PGT window models most often seen in Southern California bathrooms include the WinGuard series (impact-rated) and the Estate and Sentinel lines (non-impact). The part you’re chasing usually depends on which of these you have. If the aluminum build plate on the window frame or the interior label on the fixture reads “WinGuard,” you’re dealing with glazing and hardware specs where a generic replacement often won’t seat. If it reads “Estate Collection,” the sash, screen, and hardware are a different spec entirely.

The identification step is boring and essential. Photograph the spec label (usually on the header, jamb, or interior face). Measure the width and height of the opening in inches, not to the frame. Photocopy the label. That photocopy is what the parts counter will ask for. Whether you go OEM or a quality aftermarket equivalent for PGT depends on the part and the age: current-model hardware and the more standardized elements can take an aftermarket match reliably, while older or impact-rated models usually need the OEM part because a close match won’t pass the same spec. We don’t stock parts and can’t point you to a truck carrying them, but we do know what spec the part needs to meet.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your PGT Bathroom Remodeling Is Failing

These are the symptoms Glendale owners describe before they call. Each one points to a specific cause, not just “wear.”

  • A shower cartridge that drips or won’t shut off. The valve seat or cartridge seal has failed. In Glendale, mineral-heavy water accelerates this. It shows up as a slow drip you hear at night, then stretches into a steady drip and a water bill you notice.
  • A PGT-framed window that fogged between the panes. The perimeter seal has broken and the desiccant is spent. That’s not a cleaning problem: it’s a glazing-seal failure, and no polishes fix it.
  • A toilet that runs or refills on its own. The fill valve or flapper is worn. On older PGT-spec fixtures, the fill valve is the first internal part to go, and it’s usually the cheapest.
  • A faucet aerator or spout that clogs repeatedly. Glendale’s water puts mineral scale into the aerator screen. If you’re cleaning it more than twice a season, the screen is degrading and should be swapped.
  • Exhaust fan that runs loud but doesn’t clear the mirror. The fan clutch or blade has failed, or the fan is undersized for the bath. Poor clearing causes moisture buildup, and moisture is what kills every other seal in the room.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing for the part plus labor sits in these lanes in Glendale:

Work Installed range
Full bathroom remodel (PGT-spec fixtures) $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Shower replacement $3,000 – $8,500
Vanity installation $800 – $3,000

What moves the number: whether the subfloor or framing is sound under the failed part, whether the part is impact-rated (WinGuard specs cost more than non-impact equivalents), and whether the wall or tile has to open to reach the valve. That’s a big reason full remodeling sits at the top of the range while a cartridge replacement is a same-day, single-part job. We pull the permits where the job requires it, and inspections get signed. Every completed job carries our 90-Day Done Right Promise: if it’s not right, Tom comes back. Change orders are in writing before a single nail moves.

DIY or Call Us?

You can safely photograph the spec label, measure the opening, and check the model number against the parts sheet. You can also inspect a faucet aerator or a shower screen; those are gentle, hand-tight tasks. Where DIY slips: touching the valve on a PGT fixture with a trim that’s already been disrupted, or forcing hardware on an impact-rated window frame where the last person who tried already started to strip the screw. Neither task is worth a weekend of frustration and a house call to fix. One more thing: if a full remodel is on the table, permits and tile removal are not a homeowner project. Call (844) 560-4526 and we’ll tell you honestly whether what you have is a part replacement or a remodel.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch