A Barrett company - serving Glendale, CA

PGT Fence Installation in Glendale, CA

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

PGT Fence Installation: The Glendale Owner’s Guide

If your PGT fencing is bowing, corroding at the posts, or the HOA is sending letters about a section that’s dropped out of line, replacement in Glendale runs roughly $3,500 to $9,000 installed. That’s real product, concrete footings, hardware, haul-away, and permits where they apply. We run independent crews who’ve worked around the PGT line for years, and we install fencing built to match what’s already in your yard.

Call (844) 560-4526

This page is for the Glendale homeowner who already knows their situation: an older condominium on Kenneth Road with a shared section, a bungalow in the Adams Hill area with a tired back fence, or a hillside property off Chevy Chase where a fence has taken twenty years of sun and wind. Most people find the failure after a gate won’t latch. Or after a post pulls out of the ground in a January storm. You’re not shopping for the cheapest bid. You want to know what it actually costs and you want it done in writing.

Which PGT Models and Series This Applies To

PGT’s fencing lines run toward aluminum, vinyl, and composite-compatible assemblies, and the maker lists several residential series. The series name is usually on the paperwork that came with the fence, and on the narrower top rail or post cap. Where the label’s gone, the measurements tell the story. Most PGT residential fencing comes in nominal heights between 4 feet and 6 feet. Post spacing is the trap many homeowners miss: a 6-foot panel and an 8-foot panel look similar from the sidewalk, but the footings are set on different centers. Get that wrong and the gate sags within a season. A leftover pallet from the original build is worth its weight in gold here, so hold onto one.

The OEM-versus-aftermarket call is straightforward. PGT sells through authorized fabricators, not to walk-in customers, so a direct part match usually isn’t available off the shelf. What works: an exact-match section sized to your existing panel, or a near-match material from a comparable line, provided the color, gauge, and post-center measurements match. Aluminum fence profiles vary meaningfully from one maker to the next, so we measure twice and don’t eyeball it. If the rest of the fence is PGT and we’re replacing three sections with a similar vendor’s product, the color and grain are the sticking points. In Glendale, the sun has faded most original colors after years of exposure, so a fresh panel from the exact same maker can still look different against a five-year-old fence. That’s a conversation worth having before anyone signs anything.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your PGT Fence Installation Is Failing

A fence fails in predictable order. If you know where to look, you can catch the trouble before the whole run is ruined.

  • Posts leaning at the base, especially after rain. A post that’s kicked sideways means the concrete footing has cracked or the soil has swelled. In the clay-heavy ground around Glendale and the Verdugo foothills, this shows up after the first wet winter.
  • Rust weeping from the base of aluminum posts. Aluminum shouldn’t rust. When it does, it usually means the finish has failed and water is reaching the bare metal. One compromised post is common. Ten is a signal to replace the run rather than patch it.
  • Gate dragging on the ground or refusing to latch. The gate is the most-used part of any fence, so the hardware takes the wear. Hinges sag, and posts around gates fatigue first. A dropped gate isn’t a hinge problem; it’s usually a footing or post spacing problem underneath.
  • Panels bowing or waving along the run. Bowing vinyl panels often point to an undersized top rail or a footing that’s shifted. In Glendale’s summer heat, vinyl expands measurably. A fence installed without expansion allowance will buckle.
  • Visible gaps at the bottom or the top, and neighbors with a view. As fencing ages, panels shrink and settle. If you’re staring at the neighbor’s yard through a gap that wasn’t there, the run is telling you it’s due.

Replacement Cost in Glendale & What’s Included

For most Glendale properties, a residential fence replacement runs between $3,500 and $9,000 installed. The range comes down to three things: the total linear feet of fence, the material (vinyl, aluminum, or composite), and how much of the old fence has to come out and be hauled away. Footings at every post add real cost, and a property that needs a retaining section or a hillside footing runs higher.

  • Removal and haul-away of the old fence: usually $300 to $800, depending on length and material.
  • New posts, footings, and panels: the bulk of the number, driven by material and run length.
  • Gate hardware and latches: from simple latches up to self-closing hardware if you have a pool or HOA requirement.
  • Permits, where they apply: Glendale requires permits on most fence projects above 6 feet in height. We pull them and schedule the inspection.

Every price on our quotes is a line item. If the scope changes mid-job because a footing turns up a foot deeper than expected, you’ll see a written change order before anyone picks up a tool. Our 90-Day Done Right Promise sits on every contract: if something isn’t right, one call brings our crews back. We’re an independent contractor, not affiliated with PGT, and we work across the full home, including KraftMaid, Cambria, and Silestone product lines elsewhere on the job.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Some things you can handle yourself. Tightening a loose hinge, replacing a gate latch, or swapping a single picket are all reasonable Saturday-morning projects. We’d never talk you out of the small stuff.

Where it goes wrong: post footings, panel alignment across a long run, and anything that touches an existing PGT installation. Setting a footing in Glendale’s clay soil takes more finesse than a bag of concrete from the hardware store suggests. A post that’s off-center by an inch will make every panel on the run look wrong, and pulling it back out is expensive. Aluminum panel cutting also needs a saw blade rated for the alloy, or the finish burns and rusts within a year.

The biggest mistake we see: a homeowner patches the bottom two feet of a failing run and the posts fail six months later, so they’ve paid twice. Do the small repairs yourself. Call us for the structural work. Reach us at (844) 560-4526 for a free estimate. A live person answers, day or night.

FAQs

Ready for an Honest Fence Quote?

If you’re looking at a fence in Glendale that’s seen better days, a free estimate is the place to start. We’ll walk the property, tell you what’s failing and why, and put the whole scope in writing. Every eligible job includes permits pulled and inspections signed, no trip charge inside the county, and the standing Senior and Veteran 10% discount on every project. We also offer $40 Off Any Repair Over $200 and a Free Second Opinion on Any Written Estimate. Call (844) 560-4526 and we’ll get you on the schedule.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch