A Barrett company - serving Glendale, CA

PGT Kitchen Remodeling in Glendale, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

PGT Kitchen Remodeling: The Glendale Owner’s Guide

Kitchen remodeling in Glendale with PGT products typically runs $14,000 – $45,000 for a full kitchen and $9,000 – $20,000 for a small one, and the work is scheduled, not same-day: a real kitchen takes weeks, not hours. Most Glendale owners don’t land on a page like this because a cabinet “fails” overnight. They find it slowly: a door that hasn’t sat flush since the 2023 rains, a drawer that rubs the frame every time it closes, a hinge screw that walks out of soft wood a little more each month. PGT builds to South Florida’s wind and humidity codes, so its cabinet boxes, door frames, and hardware show up in Glendale homes through remodels, resales, and ADU builds, and they age here differently than they were engineered to. Below is how to identify what you have, what actually goes first, and what a straight price looks like.

Call (844) 560-4526

Which PGT Models This Applies To

PGT’s kitchen lines aren’t the same animal as its window and door catalog, and that’s the first gotcha. PGT is best known in Glendale for impact windows and doors under the WinGuard name, and homeowners often assume the kitchen cabinets and millwork carry the same series labels. They don’t. Kitchen product from PGT typically arrives under a distinct cabinetry or millwork label tied to the specific build, and the model number lives on a label inside the cabinet door, on the back of a drawer box, or on a paper tag stapled to the frame behind the toe kick. Find that label before you price anything. A photo of the label plus a tape measure across the door front, the drawer box width, and the hinge cup spacing tells us more than a brand name ever will. OEM replacements match the original bore pattern and finish; quality aftermarket equivalents can match the function but rarely the exact face profile or sheen. In a Glendale kitchen where half the cabinets stay, that difference shows.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your PGT Kitchen Remodeling Is Failing

  • Doors that won’t stay adjusted. The hinge screws have stripped the particleboard or MDF around them. Glendale’s dry summers pull moisture out of the substrate and the screw holes open up, so the door sags again within weeks of every tightening.
  • Drawers that rub or stick near the back. The runner or slide has worn past tolerance, or the box has racked out of square. In older PGT boxes, the slide mounts are the weak point once the frame swells and shrinks through a few seasons.
  • Soft or crumbly material at the bottom of a sink base. Past leaks under the sink sat unnoticed and the cabinet floor swelled. You’ll feel it as a spongy spot and smell it before you see it.
  • Finish peeling or blistering on door faces. Direct sun through a south or west kitchen window bakes the finish. Glendale’s summer UV load is punishing on any foil or veneer that wasn’t spec’d for it.
  • Gaps opening at the cabinet-to-wall seam. Usually the house moving, not the cabinet. The cabinet was fastened tight to a wall that shifts with our clay soils, and something has to give.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing in Glendale runs like this: cabinet installation $4,000 – $13,000, countertop installation $2,000 – $6,500, island installation $3,000 – $10,000, and backsplash $800 – $2,500, with a full kitchen remodel landing at $14,000 – $45,000. What drives the range: cabinet count and box size, whether the layout changes, counter material, and how much of the existing plumbing and electrical has to move. We quote parts and labor separately so you can see what the PGT-compatible cabinet or hardware actually costs versus the install. Every price change arrives as a written change order before the work happens, permits get pulled and inspections signed, and the finished job carries our written 90-Day Done Right Promise.

DIY or Call Us?

You can safely do a few things yourself: pull the label and photograph it, measure door and drawer fronts, tighten a loose hinge screw once, and check under the sink for soft spots with a flashlight and your hand. Where it goes wrong is re-hanging doors on stripped screw holes, pulling a cabinet that’s tied into plumbing or electrical, or trying to reset a box that was fastened to a shifting wall. Glendale kitchens built before the 1980s often hide a surprise or two behind the cabinet back, and a cabinet pulled without shutting off the right circuit or water line turns a small fix into a real mess. When in doubt, stop and call. Estimates are free, and we’ll tell you honestly whether you need a repair or a replacement. Call (844) 560-4526.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch