A Barrett company - serving Glendale, CA

Quikrete Fence Installation in Glendale, CA

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Quikrete Fence Installation: The Glendale Owner’s Guide

Quikrete doesn’t manufacture fence panels or posts. Quikrete makes the fast-setting concrete and anchoring mixes that hold fence posts in the ground, so when we talk about Quikrete fence installation in Glendale, we’re talking about setting posts correctly in Quikrete Fast-Setting Concrete Mix (or the standard Concrete Mix for larger posts) so the fence stays plumb for good. A typical installed residential wood or vinyl fence in Glendale runs $3,500 to $9,000, and that includes post excavation, concrete setting, panel or picket installation, and hauling off the old material. Fence installs are scheduled work, not emergency work, so we book them into the calendar rather than promising same-day.

Call (844) 560-4526

Homeowners usually end up reading about Quikrete fence installation for one of two reasons. The old post is heaving, leaning, or rocking in the soil, and they’re weighing whether to reset it with a concrete mix or tear the whole run out and start fresh. Or a previous contractor set posts too shallow, too loose, or without any concrete at all, and the fence is starting to telegraph that months later. Barrett & Sons Construction is an independent Glendale contractor and is not affiliated with Quikrete.

Key Takeaways

  • Quikrete is the mix, not the fence. Our installers set posts with the correct Quikrete product for each post size and soil condition.
  • Installed fence pricing in Glendale: $3,500 to $9,000, depending on length, material, and post count.
  • Glendale’s clay-heavy soil and dry summers make post-hole prep the difference between a fence that lasts 15 years and one that leans in three.
  • Every eligible job gets permits pulled and inspections signed, with written change orders before any scope moves.

Which Quikrete Products This Applies To

Two Quikrete products carry most residential fence work. Fast-Setting Concrete Mix comes in 50 lb bags and sets in roughly 20 to 40 minutes without mixing in a wheelbarrow; it’s the right choice for standard 4×4 posts holding a wood or vinyl fence up to about 6 feet tall. All-Purpose Concrete Mix is a slower, stronger option for larger posts, gate posts, and posts carrying heavier panels, and it needs proper mixing and curing time. There’s also Quikrete Anchoring Cement for setting posts against existing concrete, though that’s less common in ground-set fence work.

To identify the right product, read the bag label first. Bag color, product name, and the weight are stamped clearly, and the mix ratio and post-depth guidance are on the back. A 4×4 post typically gets about one 50 lb bag in an 8- to 10-inch hole; a 6×6 gate post can take two or three. The real gotcha with Quikrete isn’t which mix you grab, it’s the hole. If the hole is too narrow or too shallow for the post size, no Quikrete product will save the set. If you’re also updating kitchen or bath fixtures on the same property, ask us about KraftMaid, Cambria, or Silestone while we’re on-site.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Quikrete Fence Installation Is Failing

Post failure with Quikrete-set fences usually shows up in a slow, predictable order. Here’s what we look for on a Glendale inspection:

  • The post rocks in its hole. The concrete set but the hole was too wide, so the whole plug shifts in the surrounding soil. Common on fence lines set into uncompacted fill.
  • The post leans 2 to 5 degrees off plumb. Usually a shallow set combined with Glendale’s expansive clay, which swells and shrinks with the seasons and gradually lifts or tips the plug.
  • The concrete cap sits proud of the soil and cracks radially. That’s water getting in through the top of the mix or a bag that was mixed too wet. Fast-Setting Concrete Mix wants less water than people add.
  • Panels sag between posts and the gate won’t latch. The posts aren’t the problem, the set is: posts weren’t set at matched depth or the concrete hadn’t cured enough before panels went up.
  • Visible rot at the soil line and a hollow sound when you tap. The Quikrete set is fine; the post itself is failing from moisture held against the wood. In that case you’re replacing the post, not the mix.

Replacement Cost & What’s Included

Most Quikrete-set fence replacements in Glendale land between $3,500 and $9,000. The range is driven by linear footage, fence material (wood, vinyl, aluminum), post count and gate count, and how much old concrete has to come out of the ground. A typical line-item quote breaks down like this:

  • Post extraction and old concrete demo: part of labor, varies with count and depth
  • New post holes, Quikrete mix, and setting: included in the install line
  • Fence panels, pickets, rails, and gate hardware: driven by material selection
  • Permits and inspections (if required for your fence height and location): pulled and signed on eligible jobs
  • Haul-away of old material: included

We quote line by line so you can see exactly what the mix and post work costs versus the fence material. If anything changes during the job, you get a written change order before work continues. Every completed fence install is backed by our written 90-Day Done Right Promise: if it isn’t right, Tom comes back and makes it right on one call.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

If you have a single leaning post on an interior fence line and the concrete is already broken out, resetting that post with a fresh bag of Quikrete Fast-Setting Concrete Mix is genuinely within reach for a careful homeowner. But be honest with yourself about a few things. Digging out a set post is real work, and a shovel and pry bar against 60 to 80 pounds of concrete is where most weekend fence projects stall. More importantly, if the post is set near a property line, an easement, a gas line, or underground utilities, we don’t recommend digging until you’ve had the line located. Glendale has plenty of older neighborhoods where the city easement sits closer than it looks.

If more than one post is failing, if the fence carries a gate, or if the post is on a slope, call us. Barrett & Sons crew members have up to 28 years of experience setting fences in Glendale soil, and we handle the demo, the set, and the haul-away. Call (844) 560-4526 for a free estimate, and take advantage of the free second opinion on any written estimate you already have.

FAQs

Ready for a Fence That Stays Plumb?

Barrett & Sons Construction has been proudly serving local communities for over 29 years, and Tom’s name, address, and license number are published so you can look them up before you sign anything. A live person answers the phone 24 hours a day, seven days a week, not a call center. Every scope, allowance, and price change arrives in writing, and every eligible Glendale fence job includes permits pulled and inspections signed. We’re also running our standing offers: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% Senior & Veteran discount. Call (844) 560-4526 today to schedule your free estimate for Quikrete fence installation in Glendale.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch