Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Roofing: The Glendale Owner’s Guide
Quikrete roofing products in Glendale are repair and patch materials, not a full roofing system, so “replacement” here usually means replacing failed Quikrete patch, resurfacing or coating work rather than a whole roof. Most small Quikrete roof repairs in Glendale run $400 – $1,800 installed, and full roof replacement runs $8,000 – $20,000. We’re an independent contractor and not affiliated with Quikrete, but we work with these products often and can tell you honestly when a patch is the right call and when it’s covering a bigger problem.
Owners usually find out the Quikrete went bad the same way: a brown ring on the ceiling after the first real rain, granules or coating flakes in the gutter, or a soft spot on the patio cover that gives a little underfoot. Sometimes it’s a contractor’s old patch on a flat section that peeled up in a single summer, and you can lift the edge with a putty knife.
Which Quikrete Models This Applies To
Quikrete’s roofing side is a handful of product families, and knowing which one you have changes what the repair looks like. The common ones on Glendale homes are the patching cements and sealants (the tub and tube products used on flat and low-slope roofs, flashings and seams), the roof coatings and resurfacing products, and the concrete and mortar mixes that end up under tile and on parapets around flat roofs.
Find the label before you call anyone. The product name and number are printed on the bucket or tube, and a photo of the label plus the date stamp is worth more than a description. If the label is gone, the surface tells you a lot: a thick gray patch on a flat section is almost certainly a patching cement, while a white or silver reflective layer is a coating. Don’t guess at compatibility; a coating over the wrong substrate fails fast in Glendale heat.
On the OEM-versus-aftermarket question, there’s no “OEM” for Quikrete in the appliance sense. The real decision is matching the product family and the substrate: a Quikrete patch that failed on a modified-bitumen surface may need a different patch and a primer, not a bigger blob of the same thing. We’ll tell you which way makes sense for your roof, and we don’t pretend to stock parts or carry them on a truck. We source what the job needs.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Quikrete Roofing Is Failing
- Bubbles or blisters in the coating. That’s trapped moisture or a coating applied over a damp or dirty surface, and it means the bond never took. Left alone, the blister opens and water gets under the edge.
- Peeling or lifting at the edges. The patch is pulling away at the perimeter, usually because the surface wasn’t cleaned or primed first. Once the edge lifts, the whole patch is on borrowed time.
- Hairline cracks coming back in the same place. The patch is moving with the roof, which means the underlying joint or seam is still active. The repair didn’t address the cause.
- Granules or coating flakes in the gutter and downspout. The top layer is breaking down, and you’re losing the surface that protects the material underneath.
- Water staining on the ceiling or sheathing below. This is the one to take seriously: the patch has failed and water is already inside the roof assembly, and the longer it sits, the more of the deck it reaches.
If you’re seeing two or more of these, don’t add another layer on top. The next coat just buries the problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Glendale, a Quikrete roof repair runs $400 – $1,800 installed, and a full roof replacement runs $8,000 – $20,000. Tile roof repair on the same homes is $600 – $2,500, and metal roof work runs $15,000 – $40,000 when the job calls for it. What moves the number: how much square footage is involved, whether the substrate is flat or low-slope, how much of the old material has to come off, whether there’s rot in the deck underneath, and how accessible the roof is.
We keep parts and labor separate on the quote so you can see what you’re paying for. Our technicians have up to 28 years of experience, every eligible job gets permits pulled and inspections signed, and every scope or price change reaches you as a written change order before work starts. The finished work is backed by our written 90-Day Done Right Promise, and if something’s not right, one call brings Tom back.
DIY or Call Us?
You can safely check a few things yourself. Look at the label on the product, take photos of the failed area, check the ceiling below for staining, and clear leaves out of the gutters so you can see what’s actually happening. That much is fair game and it helps us a lot when you call.
Where it goes wrong is on the roof itself. Roof work means height, and in Glendale that means steep pitches, tile that cracks if you step wrong, and summer surface temperatures that will burn you through a shoe. A homeowner up there without fall protection is taking a real risk, and a patch applied wrong doesn’t fail quietly, it fails into your ceiling. We’d rather you stay on the ground and let us handle it. Call us at (844) 560-4526 and we’ll get you a free estimate.
FAQs
A properly applied Quikrete roof patch or coating typically lasts a few years before it needs attention again, and the range is wide. Glendale’s summer heat and dry spells are hard on coatings, while the occasional winter rain finds any edge that wasn’t sealed. The patch usually lasts longer when the surface was cleaned and primed and the underlying cause was fixed. If you’re not sure how much time you have, call (844) 560-4526 for a free estimate.
Sometimes, yes. If the failure is one small area and the substrate underneath is sound, a proper repair with the right product and prep is often the better call. If the patch has failed across a large section or the deck below is soft, a repair is just postponing the real work. The only honest way to know is to look at it. Our estimates are free and we’ll tell you which one it is.
A small Quikrete roof repair is usually a single day, and a larger resurfacing or repair job can run two to three days depending on weather and drying time. Products need to cure before rain, so we schedule around the forecast. Call (844) 560-4526 and we’ll give you a realistic window for your roof.
We match the product to your roof’s substrate and the original label or the surface itself, then source what the job needs at that point. We don’t claim to keep Quikrete roofing products in stock and we don’t carry them on a truck. If you’re comparing options, we also work with KraftMaid, Cambria and Silestone elsewhere in the home, but for the roof it’s about the right product for your surface. Call (844) 560-4526 to schedule a free estimate.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.