Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Home Additions & ADU: The Glendale Owner’s Guide
Schluter-compatible home additions and ADU work in Glendale runs $45,000 – $130,000 installed, and it’s planned work, not same-day work: a real addition or accessory dwelling unit takes weeks of permitting and construction, and anyone promising otherwise is selling you something. We pull the permits, and the inspector signs off. The owner of a 1920s bungalow off Chevy Chase Canyon usually finds out a Schluter detail failed the same way everyone does: a hairline crack wandering across a new tile field, a hollow thud underfoot near the shower curb, or grout that keeps coming loose in the same three square feet no matter how many times it gets patched.
Which Schluter Models This Applies To
Schluter isn’t one part. It’s a family of tile and waterproofing systems, and each piece has its own compatibility rules. Ditra and Ditra-XL are uncoupling membranes sold in rolls of 3′ 3″ width and in two thicknesses (about 1/8″ for Ditra, 5/16″ for XL); Kerdi is the waterproofing sheet for showers and wet areas; Kerdi-Board is the foam backer panel; and Schluter profiles (the Jolly, Rondec, and Trep.
Identification starts with the label on the roll or box edge, not the color alone. Schluter color-codes fleecing and print, but a cut piece loses its label quickly, so measure the thickness with a caliper before ordering a match. On the OEM-versus-aftermarket question: there are genuine-Schluter equivalents and there are generic uncoupling membranes that look similar and aren’t. For a $45,000 – $130,000 addition, saving $200 on a generic membrane is a bad trade. We specify genuine Schluter where the system needs to work as a system.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Home Additions & ADU Is Failing
- Cracks following a straight line across the tile field. That’s usually a failed uncoupling layer or a missing movement joint, not bad tile. Glendale’s slab movement on older foundations shows up here first.
- Hollow sound when you tap the floor or shower wall. Air pockets under the membrane mean the thinset didn’t bond. Left alone, the tile eventually pops.
- Grout cracking or crumbling at the shower curb and floor seam. Water is getting past the waterproofing at a change of plane, which is exactly where Kerdi banding matters.
- Efflorescence (white powdery stains) on grout lines. Moisture is wicking from behind the tile. In a Glendale ADU with a slab-on-grade bath, that often points to a membrane that was never sealed at the perimeter.
- Loose tiles near a doorway or transition strip. Expansion and traffic load are working against a membrane that wasn’t lapped or bonded correctly.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Schluter-system repair and re-installation in Glendale depends on scope, not just the membrane. A localized fix (rebanding a shower seam, replacing a few square feet) runs in the low hundreds to about $1,200 installed. A full re-tile over a new uncoupling membrane in a bath or kitchen area typically lands $3,500 – $12,000 depending on square footage, tile selection, and whether the substrate needs repair. Within a whole addition budget of $45,000 – $130,000, the Schluter system is a small line item that protects a big one. We quote parts and labor separately in writing, and every change order arrives before work moves.
DIY or Call Us?
You can safely inspect: tap for hollow spots, look for cracks and efflorescence, check that grout lines at corners have a flexible sealant rather than hard grout, and photograph everything for your records. Where DIY goes wrong is the install itself. Schluter systems fail on the details: thinset coverage, fleece embedment, lap direction, and cure time. Get any of those wrong and you’ve spent a weekend and $600 to reproduce the same crack in 18 months. This isn’t a dangerous job like a garage spring or a live panel, but it is an unforgiving one. Call (844) 560-4526 and we’ll tell you honestly whether you need a repair or a redo.
FAQs
How long does a Schluter system last? A correctly installed Schluter uncoupling or waterproofing system should outlast the tile over it, often 25 years or more. The failure you’re seeing is almost always an installation detail, not the membrane aging out.
Can it be repaired instead of replaced? Sometimes. A localized seam or band failure can be rebanded and re-tiled without tearing out the whole field. We’ll tell you which one you’re facing after we look. Call (844) 560-4526 for a free estimate.
How long does the swap take? A small repair is often a day. A full re-tile over new membrane in a bathroom runs several days to a week, plus cure time before grout and sealer. We schedule it as planned work and tell you the timeline up front.
How do you source the part? We specify genuine Schluter membranes and profiles through tile suppliers, matched to your existing thickness and series. We don’t claim to stock parts or carry them on a truck; we order what the job needs and show you the spec sheet.
Barrett & Sons Construction Glendale is an independent service provider and is not affiliated with Schluter. We also work with KraftMaid, Cambria, and Silestone on the finish side. Call (844) 560-4526 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.