Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Bathroom Remodeling: The Glendale Owner’s Guide
Sterling bathroom remodeling in Glendale typically runs $9,000 – $28,000 installed, and it’s planned work, not same-day work. If you’re pricing a tub-to-shower conversion, a shower replacement, or a full gut with Sterling-compatible fixtures, the estimate is free and every price change arrives as a written change order before a single nail moves.
Most Glendale owners don’t call us about a brand. They call because something failed. A shower pan that flexes underfoot in a 1920s bungalow off Adams Hill. A vanity that’s been slowly pulling away from the wall in a 1980s Glendale condo. A tub surround whose caulk line keeps reopening no matter how many times it gets redone. The Sterling label turns up on the drain plate, the valve trim, or the fixture sticker, and that’s usually how the homeowner finds out what they actually have. Keep reading before you sign anything, because the series and the rough-in dimensions decide what fits.
One thing up front: Barrett & Sons Construction Glendale is an independent contractor, not affiliated with Sterling. We remodel bathrooms and install Sterling-compatible fixtures. We don’t stock parts and we don’t carry them on a truck. What we do is measure the model, order the correct part or unit, and stand behind the install with a written 90-Day Done Right Promise.
Key Takeaways
- Full Sterling-compatible bathroom remodels in Glendale: $9,000 – $28,000. Small bathroom remodels: $5,000 – $12,000.
- Sterling makes bathroom fixtures (shower bases, tub surrounds, drains, trim kits), so identify the series and rough-in before ordering anything.
- The remodel itself is scheduled work. Nobody rebuilds a bathroom in a day, and anyone who tells you otherwise is guessing.
- Every eligible job gets permits pulled and inspections signed. The permit inspector works for you, not for us.
- Call (844) 560-4526 for a free estimate and a free second opinion on any written estimate you already have.
Which Sterling Models This Applies To
Sterling (the plumbing fixture brand under Kohler) runs several bathroom product lines, and the one you have changes what we order. Shower bases and receptors have to match the exact rough-in – the drain location and the alcove dimensions are what break most replacement attempts. Tub surrounds are cut to fit specific alcove sizes, usually 60-inch and 72-inch models, and a mismatched unit leaves you with a gap you can’t caulk out. Drain assemblies and valve trim kits are series-specific too. A trim kit from the wrong line won’t seat cleanly no matter how hard it gets pushed.
Before we quote anything, we do two things. We read the label or sticker on the fixture (often inside the shower base lip or behind the access panel), and we measure the rough opening with a tape, not a guess. If the sticker is gone, we measure and cross-reference dimensions against the manufacturer’s spec sheet. On the OEM-versus-aftermarket question: for visible parts like drain plates and trim, we lean OEM because the finish and fit matter and aftermarket chrome fades faster in California sun through a bathroom window. For internal components, a quality aftermarket part is often fine and cheaper. We’ll tell you which one you’re getting and why, in writing. We also handle KraftMaid, Cambria, and Silestone for the vanity and countertop side of the job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Bathroom Remodeling Is Failing
Here’s what owners actually report, and what’s usually behind it:
- The shower base flexes or pops underfoot. That’s a base set on an uneven or unbedded floor, common in older Glendale homes where the subfloor has settled. Left alone, flex cracks the base and water gets behind it.
- A hairline crack or spiderweb near the drain. Usually stress from that same flexing, or a drain that was tightened unevenly. Small cracks turn into leaks fast.
- The caulk line at the tub deck or wall junction keeps reopening. The fixture has shifted, or the joint was caulked over movement instead of built to accommodate it. Fresh caulk won’t fix a moving joint.
- Water staining on the ceiling below, or a soft spot near the toilet flange. A failing pan liner or a worn wax seal. In Glendale’s older housing stock, this is often the first visible sign of a problem that started years earlier.
- Discolored or pitted finish on trim and drains. Normal aging, sped up by Glendale’s hard water. Hard water leaves mineral deposits that pit chrome and brass over time.
We regularly see shower bases in Glendale fail in exactly this order: flex first, crack second, water damage third. The cheap fix at the first sign is a rebed or reseal. The expensive fix at the third stage is a full rebuild.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Glendale, here’s what our bathroom remodeling work actually runs, installed:
| Scope | Installed Price Range |
|---|---|
| Full bathroom remodel (Sterling-compatible fixtures) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What drives the range: whether it’s a simple fixture swap or a full gut. A shower replacement where the rough-in and drain already line up sits at the low end. A gut where we’re opening walls, moving the drain, and pulling permits lands at the top. That’s why a tape measure and a look behind the access panel matter more than a phone quote. The $9,000 – $28,000 range assumes the full job, permits included, and everything written down. Every scope and allowance is on paper before work starts, and every price change is a written change order. Finished work is backed by our 90-Day Done Right Promise. There’s no trip charge inside the county, and we offer a free second opinion on any written estimate you already have.
DIY or Call Us?
Checking your own fixture is safe and smart. Look for the label, measure the rough opening, note the drain location, and take a photo of the valve trim. That’s information you can hand us and save a return trip.
The install is different. Sterling shower bases and pans have to be set level, bedded properly, and sealed against the wall with the right waterproofing behind them. Most failures we see in Glendale are waterproofing failures. Water gets behind a pan that wasn’t bedded right, and you don’t find out until the ceiling below shows it, months later. If the work involves opening walls, relocating a drain, or replacing a pan, that’s not a weekend project. Vanity swaps and trim replacements are reasonable for a careful homeowner. Pan and rough-in work is not.
Call (844) 560-4526 and we’ll tell you straight whether you need a part or a redo. A live person answers, day or night.
FAQs
How long does a Sterling shower base or surround last?
Ten to fifteen years is typical for most bathroom fixtures, though in Glendale, hard water and older plumbing can shorten that. If yours is past that mark and you’re seeing flex or cracks, it’s worth a look before it fails completely.
Can the part be repaired instead of replaced?
Sometimes. A rebed and reseal can buy a few years on a minor flex issue. A crack near the drain or water showing below the floor means replacement. We’ll tell you which one you’re facing, in writing.
How long does a swap take?
A shower base or surround replacement is typically a two- to three-day job, depending on wall condition behind the unit. We don’t call it same-day work. We schedule it, pull the permit if one’s required, and finish it right.
How do you source the part?
We measure your rough-in and match the model, then order the correct fixture from a supplier. We don’t inventory parts and don’t carry them on a truck, so there’s a short lead time before install day. Call (844) 560-4526 and we’ll give you a realistic timeline.
If you’ve got a failing Sterling fixture or you’re ready to remodel a Glendale bathroom right, call (844) 560-4526 for a free estimate. We pull the permits, put every scope and price change in writing, and back the finished work with the 90-Day Done Right Promise. A free second opinion on any written estimate you already have is always available, and our permanent 10% Senior & Veteran discount applies on top.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.