Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Driveway & Pavers: The Glendale Owner’s Guide
If you have a Sterling paver system or Sterling hardscape edge restraint that’s failing, we install Sterling-compatible driveway and paver work in Glendale at installed prices from $7,000 to $18,000 for a full paver driveway. Most owners find out something’s wrong the same way: a catch in the walk-on step near the driveway apron, a paver that rocks underfoot after the last Glendale storm, or a corner that lifts and lets rainwater pool against the garage threshold instead of shedding off it.
Key Takeaways
- A rocking or lifting paver almost always means the bedding sand or base layer has washed out, not that the paver itself is worn.
- Genuine Sterling paver profiles have fixed dimensions; a substitute brick of the same color but a different thickness won’t sit flush with your neighbors.
- Full paver driveway installs in Glendale run $7,000 to $18,000, and the range is driven by base depth, grading, and how much of the old surface comes up.
- We’re an independent contractor, not affiliated with Sterling. We source genuine Sterling components and quality equivalents, quoted before we start.
Which Sterling Models This Applies To
Sterling’s driveway and paver line splits into a few families, and matching the right component starts with the series rather than the color. Sterling paver profiles generally come in standard imperial face dimensions (around 4 by 8 inches for the classic running-bond block, with larger format and edge-restraint pieces in the paver system), so your first task is to confirm the exact face size and thickness of what’s already down. A paver that looks identical but is a few millimeters thinner will sit proud of its neighbors and catch a lawn mower or a tire within one season.
On a Glendale driveway, thickness matters as much as footprint. Our summer heat pulls moisture out of the sand bedding fast, and our winter rain sends a lot of runoff down the slope from the Verdugo foothills above some neighborhoods. That combination punishes a thin paver and a shallow base. If you’re replacing a section rather than the whole driveway, matching the existing unit’s thickness to the millimeter keeps the field flat.
How to identify yours: check the underside of a loose paver (many manufacturers stamp a mark there), measure face and thickness on three units, and note the color-lot number if one is printed on the carton the installers left behind. Color lots shift. A “Sterling tan” from a batch a few years apart can read noticeably warmer. When a match is uncertain, ask us before you order. We quote the sourced part and the labor separately so you can see exactly what the material costs. Genuine Sterling components cost more than a generic brick of the same footprint, and they’re worth it when you’re matching into an existing field rather than repaving the whole thing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Driveway & Pavers Is Failing
Paver failure is rarely the paver’s fault. It’s almost always the base, the joint sand, or the edging holding the field together. Here’s what owners actually see, and what’s underneath each one.
- A single paver that rocks when you step on it. The bedding sand beneath it has washed out or compacted unevenly. In Glendale this often shows up near the driveway apron where irrigation runoff and street drainage meet.
- Lifting or “tenting” at a corner or edge. The edge restraint or the joint sand has let go, so the surface has nowhere to push against. Heat expansion has nowhere to go and the field buckles.
- Sand washing out of the joints. Water is draining across the surface rather than off it, or the slope has settled. Once joints open up, weeds get in and the interlock weakens further.
- Sunken or heaved areas in one section. The base layer has settled or shifted, usually over a soft spot or an old utility trench. This is a base repair, not a paver swap.
- Color fading or efflorescence (the chalky white haze). Sun and moisture reacting with salts in the concrete. Fading is cosmetic; the white haze usually means water is sitting where it shouldn’t.
Check your whole driveway after the first hard rain of the season. Standing water in a low spot tells you more about the base than any visual inspection on a dry day.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed paver work in Glendale runs $7,000 to $18,000 for a full paver driveway, and $3,500 to $11,000 for a paver patio. A partial repair or a section replacement costs far less and we quote it line by line. Here’s what drives the range.
- Base depth and grading. A driveway that needs deeper compacted base to handle Glendale’s rain runoff sits at the top of the range.
- Removal and haul-off. Pulling up the old surface and disposing of it is real labor and it factors into the number.
- Material choice. Genuine Sterling components cost more than a generic equivalent of the same footprint, and we quote them as a separate line so you can see exactly why.
- Edge restraint and joint sand. The parts nobody sees are the parts that keep the field from tenting. We don’t skip them.
Every scope, allowance, and price change arrives in a written change order before work starts. No surprise invoice at the end. Our labor carries a workmanship warranty, and every eligible driveway job gets the written 90-Day Done Right Promise: if something’s not right, one call brings us back.
DIY or Call Us?
You can safely handle some of this. Pop out a single loose paver, check the underside for a manufacturer stamp, and measure its face and thickness. That gives us what we need to quote an exact match. Sweeping joint sand back into open joints after a storm is also a reasonable homeowner task.
What we’d rather you didn’t attempt alone: re-setting a whole section without compacting the base properly, or digging out and re-bedding a sunken area. A proper base is compacted in lifts with the right depth for our soil and rainfall. A homeowner-set paver on a hand-tamped base looks fine for a season, then heaves the next time Glendale gets a wet winter. The pavers themselves are heavy, and lifting a driveway’s worth by hand is how backs get wrecked. The bigger risk is settling that traps water against the house, which is a much more expensive problem than the one you started with.
For anything beyond a single loose paver, call us at (844) 560-4526. Estimates are free, whether you’re matching one Sterling paver or repaving the whole driveway.
FAQs
How long do Sterling pavers last in a Glendale driveway? A properly installed Sterling paver field typically lasts 20 to 30 years or more. The base and joint sand decide the lifespan, not the paver. In Glendale, our summer heat and winter rain cycles are hard on the base unless it’s compacted deep enough and the surface drains properly.
Can a failing paver be repaired instead of replaced? Yes, more often than not. A single loose or cracked paver, open joints, or a small sunken section can be lifted, re-bedded, and re-sanded without touching the rest of the field.
How long does a paver swap or repair take? A single-paver replacement is a couple of hours. A section repair typically takes a day. A full driveway replacement depends on base work and removal, and we give you a written schedule before starting. Call (844) 560-4526 for an exact timeline and quote.
How do you source the Sterling part? We confirm your series, face size, thickness, and color lot, then source genuine Sterling components or a quality equivalent and quote it as a separate material line. We don’t carry parts in inventory, so we order exactly what your driveway needs and show you the material price before you approve it.
Have a Sterling driveway issue we didn’t cover? Call (844) 560-4526 to schedule your free estimate. We install premium hardscape materials across Glendale and nearby areas, and we work with the same premium depth in other trades: KraftMaid and Cambria in the kitchen, Silestone countertops, and the brands you can verify rather than mystery materials off a truck.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.