A Barrett company - serving Glendale, CA
S

Sterling Roofing in Glendale, CA

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Sterling Roofing: The Glendale Owner’s Guide

We install and replace Sterling-compatible roofing systems in Glendale, and a full roof replacement here typically runs $8,000 – $20,000, with targeted repairs landing between $400 and $1,800 depending on what failed. Most Glendale owners find out something’s wrong after a wind event strips shingles off a slope, or after the first real rain sends a brown ring across a ceiling in the hallway. Sterling roofing usually shows its age through granule loss in the gutters first, then lifted or cracked shingles along the ridge, and finally a slow leak that only shows up when the Santa Ana winds push rain sideways instead of down.

Call (844) 560-4526

Which Sterling Models This Applies To

Sterling has made asphalt shingle lines, tile profiles, and low-slope rolled products under several series names, and the part you need depends entirely on which one is on your roof. The fastest way to identify yours is to look at the underside of a shingle tab at the eave or in the attic, where the manufacturer stamps the series and the fire rating. If the stamp is worn, measure the exposure – the visible height of each shingle course – because Sterling’s standard three-tab runs a 5-inch exposure while their architectural line uses a deeper profile, and grabbing the wrong one leaves you with a mismatched course that telegraphs from the street. Original paperwork in the garage or a closing binder from the sale often lists the series too; if you’ve got it, that beats any guess.

OEM Sterling shingles are the surest match on color and profile, but for a small repair we’ll often recommend a quality aftermarket shingle in the same weight class and color family when OEM stock is slow to arrive or discontinued. We don’t carry parts on a truck and we don’t stock Sterling shingles locally – we source what your roof actually needs once we’ve seen it. Many Glendale roofs we look at turn out to be mixed, with an older Sterling field patch under a newer layer, so we verify before ordering. You can also look up KraftMaid, Cambria, and Silestone through us if your project crosses into the kitchen.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Sterling Roofing Is Failing

  • Granules in the gutter and downspout outlets. Sterling asphalt shingles lose their protective granule layer over time, and heavy granule shed means the mat underneath is thinning and closer to cracking.
  • Shingles lifting or curling at the ridge and hips. Heat cycling in Glendale’s dry summers stiffens the adhesive strips, and once they let go, wind grabs the edge and peels the course.
  • Cracked or split shingle tabs. These usually trace to a foot-traffic mistake during a past repair or to thermal stress, and each crack is a direct path for water.
  • Water stains on ceiling drywall or attic sheathing. A stain after a storm points to a failed flashing, a lifted shingle, or a nail pop, and left alone it becomes rot in the framing.
  • Moss, dark streaks, or blistering on south-facing slopes. Algae streaking and blistering tell you the shingle surface is breaking down and the roof is nearing the end of its service life.

Replacement Cost & What’s Included

In Glendale, a full Sterling-compatible roof replacement runs $8,000 – $20,000, and a targeted repair runs $400 – $1,800. Tile roof repair, if your Sterling product is a tile profile, runs $600 – $2,500, and a metal roof installation runs $15,000 – $40,000. The price range is driven by roof size and pitch, how many layers need tearing off, the condition of the decking underneath, and whether you’re replacing flashing and vents along with the shingles.

Every quote we write is line-item and transparent: materials, labor, tear-off, and disposal are each listed, and if the scope changes once we’re on the roof, you get a written change order before any work moves forward. Warranty on the work is backed by our 90-Day Done Right Promise – if it’s not right, one call brings Tom back. Free estimates, no trip charge inside the county, and a free second opinion on any written estimate you’ve already got.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely check a lot from the ground: scan for lifted or missing shingles with binoculars, look at the gutters for granule buildup, and check the attic from inside for stains or daylight. What we don’t recommend is climbing up to patch a Sterling shingle yourself – roof work on a pitched Glendale roof is a genuine fall hazard, and a wrong flashing detail or a poorly seated shingle is exactly the kind of repair that fails at the next storm. Have us out to look instead. Call (844) 560-4526 and we’ll give you an honest read on whether you’re looking at a repair or a replacement.

FAQs

Get Your Free Roofing Estimate in Glendale

Whether it’s a handful of lifted shingles or a roof that’s showing its age, call (844) 560-4526 for a free estimate in Glendale. We’ll give you a plain-spoken read on what’s actually wrong, a line-item price in writing, and a job backed by our 90-Day Done Right Promise. Barrett & Sons Construction Glendale is an independent service provider and is not affiliated with Sterling.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch