A Barrett company - serving Glendale, CA

Tamko Bathroom Remodeling in Glendale, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tamko Bathroom Remodeling: The Glendale Owner’s Guide

Bathroom remodeling in Glendale with Tamko materials typically runs $9,000 – $28,000 installed, depending on square footage, finish level, and whether the layout moves. We handle Tamko tile backer and waterproofing systems alongside the full remodel scope, and estimates are free. Most owners don’t come to us because of a label. They come in because of what’s underneath: soft spots near the shower pan, grout that crumbles no matter how many times it’s patched, or a wall that smells faintly of damp every time the weather turns warm.

Call (844) 560-4526

That pattern matters in Glendale specifically. The dry summers and the older stock of homes across Adams Hill and the Tropico corridor mean a failed moisture barrier has usually been quietly spreading behind the tile for a while before anyone sees it. By the time a corner tile pops off, the substrate is often the real story.

Which Tamko Models This Applies To

Tamko doesn’t build fixtures. What it makes for bathrooms is the layer you never see once the job is closed up: cement backer board, waterproofing membranes, and the accessories that tie them together at seams and corners. So the “model” question is really a compatibility question about your existing assembly, not a serial number on a faucet.

Here’s the practical part. Tamko backer panels come in standard thicknesses, and the seam-taping and membrane tape that go with them are matched to those thicknesses. A common gotcha we see in Glendale remodels: an owner buys a competitor’s seam tape off the shelf, and it doesn’t bond properly to the Tamko panel face because the surface texture and absorption differ. The waterproofing looks sealed and isn’t. That’s a redo, not a repair.

The other gotcha is thickness under an existing threshold. Swapping a thinner panel for a standard half-inch panel changes your finished wall depth, which throws off the shower door reveal and the floor transition. Measure the existing substrate, measure the threshold clearance, and confirm the replacement panel matches before anything gets torn out.

OEM vs. aftermarket for Tamko: with backer and membrane systems, the matched accessories are worth the small extra cost. Generic equivalents save a few dollars and cost you the seal. For the finishes on top – and for the cabinetry and stone going into the same room, where we also install KraftMaid, Cambria, and Silestone – name brands matter because the specs are published and verifiable. Barrett & Sons Construction Glendale is an independent service provider, not affiliated with Tamko.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tamko Bathroom Remodeling Is Failing

Water doesn’t announce itself. These are the symptoms Glendale owners actually call about, and what each one usually means.

  • Tiles popping loose or hollow-sounding. The backer panel has absorbed moisture and lost bond with the thinset. Once a panel wicks, it doesn’t dry out behind the tile.
  • Grout cracking in a repeating line. A straight-line crack, especially along a seam, points to movement or a failed seam joint rather than grout wear. Regrouting won’t fix a seam that was never taped and sealed correctly.
  • Persistent musty smell near the shower or tub. That’s trapped moisture in the wall cavity. In Glendale’s older homes, this often traces back to a membrane that was never installed, or installed over drywall instead of backer.
  • Soft or spongy floor at the shower threshold or toilet base. Subfloor water damage, usually from water getting past a failed pan liner or threshold detail over a long stretch.
  • Efflorescence or white crusting on the tile face. Mineral salts wicking through from wet substrate. It means the panel behind is saturated, not just damp.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Bathroom remodeling in Glendale with Tamko backer and waterproofing runs $9,000 – $28,000. A smaller full bath lands closer to $5,000 – $12,000. Here’s where the range moves:

  • Square footage and how much tile comes off – full gut versus a targeted replacement of the wet zone.
  • Whether the substrate and framing are sound or need repair once the wall is open.
  • Fixture and finish choices, which is where allowances matter most.
  • Layout changes: moving a drain or supply line adds real cost.

Every price we quote arrives as a written scope with materials and allowances spelled out, and any change comes as a written change order before work proceeds. No surprise invoice at the end – an allowance that isn’t on paper is a surprise waiting for a date. Every eligible job gets permits pulled and inspections signed, and the finished work carries our written 90-Day Done Right Promise.

DIY or Call Us?

You can safely check a few things yourself. Press on the tile near the shower with a fingernail and listen for hollow tones. Peel back a loose grout edge to see if the substrate is soft or wet. Look under the shower pan through an access panel if you have one, and check the ceiling below for staining.

Where DIY goes wrong is the rebuild. Waterproofing is unforgiving, and a seam that looks sealed but isn’t means mold and rot behind the wall within a season or two. That’s not a project to learn on. Call us at (844) 560-4526 for a free second opinion on any written estimate you’ve already received, and we’ll tell you straight what your assembly needs. We also offer $40 off any repair over $200 and a permanent 10% Senior & Veteran discount.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch