Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Driveway & Pavers: The Glendale Owner’s Guide
If your Tamko driveway pavers are heaving, cracking, or washing out at the joints, we install and repair Tamko-compatible paver systems across Glendale. A paver driveway installation typically runs $7,000 – $18,000 installed here, and a paver patio $3,500 – $11,000. Spot repairs and resealing cost far less: driveway sealing is $250 – $700, and small paver repairs sit under the $200 mark at the bottom end. Same-day service is not something we promise on paver work because it doesn’t exist; a proper base repair and reset takes days, not hours.
Glendale owners usually catch the problem the same way. A section of driveway settles after a heavy rain, a paver rocks when the car rolls over it, or sand starts washing into the gutter every winter. That’s the point where you need to know what actually failed: the paver, the base under it, or the joint sand holding it all together.
We’re Barrett & Sons Construction Glendale, an independent contractor. We are not affiliated with Tamko; we work with Tamko-compatible pavers and the systems that keep them stable in Glendale soil.
Which Tamko Models This Applies To
Tamko paver systems aren’t identified by a single model number stamped on the face. The product identity lives in three places: the bundle wrapper, the pallet tag, and the paver profile itself. Glendale owners frequently pull up the wrong part listing because they matched a color name instead of a profile dimension.
Here’s how to match correctly. Measure the actual face of one paver, not the joint line, and record both length and width to the nearest sixteenth of an inch. Tamko’s older paver lines and its current lines use different nominal thicknesses, and a 2⅜-inch unit will not sit flush against a 2¾-inch unit in a mixed field. Compare that measurement to the pallet tag, which carries the series name and the color code. The color code matters more than the color name in Glendale, because the same “buff” reads differently across production runs and sun exposure.
The OEM-versus-aftermarket decision is real here. Tamko-branded field pavers are the exact-match choice for repair patches where color and profile must blend. For base material, edge restraint, and joint sand, quality aftermarket equivalents do the same job and cost less. We tell Glendale customers which parts genuinely need the OEM match and which don’t, so you aren’t paying a premium for sand that never needed a label on it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Driveway & Pavers Is Failing
- Rocking pavers. A paver that tips underfoot means the bedding layer under it has settled or washed out. This is base failure, not paver failure, and replacing the paver alone won’t fix it.
- Widening joint gaps. Sand washing out of the joints leaves pavers free to shift. In Glendale, winter rain is the usual culprit, and once the sand is gone the edges start chipping.
- Heaving or lifting sections. A raised hump often means water is trapped under the base. Left alone, the pavers above it crack within a season or two.
- Hairline cracks across the face. Cracks that run across several pavers usually point to a moving base or a root system pushing up. Pallet-tag thickness and base preparation both come into question.
- Staining that won’t scrub out. Efflorescence and rust bleed are signs the sealer has worn off. Here in Glendale, sealer typically needs refreshing every two to three years, shorter on sun-baked south-facing driveways.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Rather than guess, we give Glendale customers a written line-item quote before work starts. Here’s what drives the range:
| Work | Installed Price Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway sealing | $250 – $700 |
| Concrete driveway (alternative) | $4,500 – $12,000 |
| Asphalt paving (alternative) | $3,500 – $9,000 |
| Full driveway replacement | $5,000 – $14,000 |
The range moves with square footage, paver profile, and how much base has to be dug out and rebuilt. Repairs that only reset a few pavers and re-sand the joints come in far below the install numbers. Every quote separates parts, labor, and any base material so you see exactly where the money goes. Any change to scope arrives as a written change order before a single paver is lifted. Completed paver jobs carry our written 90-Day Done Right Promise.
DIY or Call Us?
You can safely check a few things yourself. Measure a paver face, photograph the pallet tag, and note which sections rock or sit low. Push a screwdriver into the joint sand to see how deep the joint has hollowed out. Those notes make a real difference when you call, because they tell us whether you’re looking at a spot repair or a base rebuild.
Where DIY goes wrong is the base. Pulling up a settled section without rebuilding what’s underneath just resets the same failure, and re-sanding a washed-out joint without fixing the grading lets the next Glendale storm undo your weekend. Pavers also run heavy, and a bad back goes fast. If your driveway is more than a few square feet of trouble, call us at (844) 560-4526. Estimates are free, and a free second opinion comes with no obligation. We also handle other premium brands across our trade work, including KraftMaid, Cambria, and Silestone.
FAQs
Well-installed Tamko pavers can hold up 25 to 40 years, with sealer refreshed every two to three years in Glendale’s sun and rain. The pavers usually outlast the base under them, which is why joint sand and grading matter as much as the paver itself. Call (844) 560-4526 for an exact quote on your driveway.
Often yes. A handful of rocking or cracked pavers can be lifted, the base reset, and the field re-sanded without tearing out the whole driveway. If the failure runs across a large section, a partial rebuild of that span saves money over a full replacement.
A spot repair usually takes a day or two, while a full paver driveway install runs several days depending on size and base work. We tell you the realistic timeline in the written quote, so there’s no surprise when the crew arrives.
We match your measurements and pallet tag to the correct Tamko-compatible profile and color code, then confirm the fit before ordering. You get the part spec in writing so you can check it yourself. Give us a call at (844) 560-4526 to start the match.
Every Tamko-related paver job we finish comes with the same thing at the door: written scope, written pricing, a live person answering when you call, and a promise we stand behind.
Call (844) 560-4526 today to schedule your free estimate on your Tamko driveway and paver work in Glendale. Our crews have handled paver and driveway installs for Glendale homeowners for years, and we’ll put the whole scope in writing before we start.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.