A Barrett company - serving Glendale, CA

Tamko Fence Installation in Glendale, CA

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tamko Fence Installation: The Glendale Owner’s Guide

We install Tamko-compatible fencing in Glendale, and most full fence jobs run $3,500 to $9,000 installed, depending on linear footage, height, material line, and how much old fence and concrete footing has to come out first. Scheduled installs usually land in our calendar within a week or two, not the same day. Owners typically call us after they notice a post leaning at the base, a run of pickets going crooked in the heat, or gate hardware that swings on its own because the post behind it has started to move.

Call (844) 560-4526

If you’re reading this because something on a Tamko fence failed, you’re in the right place. We’ll walk you through what to check, what it costs, and when repair makes more sense than replacement.

Which Tamko Models This Applies To

Tamko is best known in Glendale for composite and vinyl fence lines, and the model family matters more than most owners realize. A picket, rail bracket, or post cap from one line will often fit a sister line but not cross over. Before we quote anything, we find the product label on the inside face of a rail or the underside of a post cap, photograph it, and match the profile and color code. If the label is gone, we measure rail thickness and picket spacing against the original spec sheet.

The OEM-versus-aftermarket call is where Glendale homeowners get burned by online sellers. Tamko-branded hardware is the safest match for color, texture, and the locking profile of the rails. In a few cases a quality aftermarket equivalent from a domestic composite supplier is just as good and easier to source, and we’ll tell you which is which before you buy.

One note: some older Tamko fence lines have been discontinued or rebranded, and color match is the real problem, not the part. We’ll show you the closest current option in person so you’re not guessing from a photo.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tamko Fence Installation Is Failing

These are the symptoms we see most often on Glendale fences:

  • Posts leaning toward the street. Usually footing failure, not the post itself. Glendale’s clay-heavy soil swells and shrinks with our wet winters and dry summers, and an undersized or shallow footing works loose over time.
  • Pickets warping or pulling away from the top rail. Composite and vinyl expand and contract with heat, and a run that wasn’t set with the right gap will buckle. If pickets are ghosting or separating at the fastener, the install spec is the culprit, not the material.
  • Cracked or chalky rails near the top. UV exposure in Glendale is hard on any fence. Chalking and surface cracking at the top edge usually means the material is at the end of its service life.
  • Rattling or loose gate hinges. The gate post is almost always the weak point. A gate hung off a post that wasn’t set deep enough will sag within a season or two.
  • Water staining at the base of posts. Pooling at the footing line during winter rains is the first sign the base is being undermined. Catch it early and a post replacement can fix it; catch it late and you’re replacing a run.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Tamko fence installation in Glendale typically runs $3,500 to $9,000 for a standard residential lot. What drives the range: linear footage, fence height, which Tamko line you choose, gate count, and how much old fence and footing has to come out. Demolition and haul-away usually add to the low end; a short run of fence replacement often lands near the bottom of the range, while a full perimeter with two gates and fresh footings lands near the top.

Here’s how we price it:

  • Materials (panels, posts, rails, hardware) quoted as a line item at the price you’ll see on the invoice.
  • Labor for demolition, setting footings, and installation.
  • Permits and inspection where required by the City of Glendale. We pull the permit and the inspector signs off, no exceptions.
  • Haul-away of the old fence and debris.

Any price change on the job arrives as a written change order before we touch anything. All work is backed by our written 90-Day Done Right Promise.

DIY or Call Us?

Some things you can safely check yourself: look for the product label on the fence, measure a few picket gaps and post spacings, and photograph any leaning or cracking. That’s information you can hand to anyone who quotes the job.

What we don’t recommend for most homeowners: digging out and resetting footings, or tearing into a run that’s attached to a structure. A post set in the wrong soil condition or without the right footing depth will fail again within a season, and on a gate or shared-property line a bad reset can cause structural problems you didn’t have. That’s not scare-talking; it’s what we see on Glendale fences that were installed without a permit or proper footing plan.

If you want a straight answer on repair versus replace, call us at (844) 560-4526. We’ll give you a free estimate, and if a repair is the right move, we’ll tell you.

FAQs

How long does a Tamko fence last in Glendale?
A properly installed Tamko composite or vinyl fence typically lasts 15 to 25 years in Glendale’s climate, depending on the line and sun exposure. The material usually outlasts the footings, which is why post setting matters as much as the panels.

Can a failing section be repaired instead of replaced?
Yes, often. A single failed post, a bent gate, or a short run of damaged pickets can usually be repaired for a fraction of a full replacement. We’ll inspect the footing and adjacent sections before recommending either way.

How long does a replacement take?
Most residential Tamko fence replacements in Glendale take 2 to 4 days once the permit is in hand, depending on footage, gate count, and how much demolition is required. We’ll give you a written schedule with your estimate.

How do you source Tamko parts?
We source through authorized dealers and match against the fence’s product label and color code. If a discontinued line is involved we’ll show you the closest current match in person rather than guessing from a photo.

Barrett & Sons Construction Glendale installs Tamko fencing and KraftMaid, Cambria, and Silestone products on other jobs, and we’re an independent contractor, not affiliated with Tamko. Call (844) 560-4526 for a free estimate.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch