Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Techo-Bloc Bathroom Remodeling: The Glendale Owner’s Guide
Techo-Bloc bathroom remodeling in Glendale runs $9,000 – $28,000 installed, and most projects start with a written in-home estimate rather than a phone number. Techo-Bloc makes hardscape and masonry products – pavers, wall block, step units, slabs – not plumbing fixtures, so “Techo-Bloc bathroom remodeling” in practice means installing Techo-Bloc slab, paver, or wall systems in a Glendale bathroom: curbless shower floors, wall tile set in stone-look slab, vanity surrounds, and masonry bench or niche assemblies. Owners usually find the problem the same way: a slab face in the shower drifts out of plane, grout lines open along a curb return, or a wall-block veneer starts sounding hollow under a knuckle. If you’re pricing a fix, the range above holds for a full Glendale bathroom; a single failed assembly or a repair run costs far less.
Which Techo-Bloc Models This Applies To
Techo-Bloc’s bathroom-relevant lines are its slab and dimensional stone products – the large-format slabs used as shower wall panels and vanity faces, plus the paver lines that get cut down for curbless shower floors and thresholds. Compatibility is not universal. A slab from one series does not match the thickness or the back-edge profile of a different series, and mixing them along a wet-wall seam is where most Glendale leaks begin. If your existing install is failing, find the original series name before you order anything: it’s usually on the contractor’s invoice in the job file, on a leftover slab in the garage, or readable on the back face of a pulled-off piece.
Measure three things and write them down – nominal thickness, actual face dimension, and whether the edge is square-cut or beveled. Those three numbers decide whether a replacement piece matches without a visible seam. OEM versus aftermarket matters less here than people assume: a quality stone slab of the same thickness and face dimension finishes identically once set, and a mismatched thickness of 1/8 inch shows at every grout joint for the life of the bathroom. We’re an independent Glendale service provider and not affiliated with Techo-Bloc, so we’ll tell you plainly when a matching piece is worth chasing and when a clean re-face of the assembly is the better spend.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Techo-Bloc Bathroom Remodeling Is Failing
Bathroom stone and slab assemblies don’t fail all at once. They telegraph it. In Glendale’s housing stock – a lot of pre-war and mid-century homes with original framing that moves – we see the same handful of symptoms year after year.
- Hollow sound under a knuckle along the wall. The setting bed has let go from the substrate. Usually moisture got behind the slab through an unsealed joint, and the thin-set has lost its bond over years of wet-dry cycling.
- Grout lines opening along a shower curb or niche return. The curb is the highest-movement point in any bathroom. Grout cracks there first, then water tracks behind the slab instead of down the drain.
- Efflorescence – the white chalky bloom on stone faces. That’s salt being pushed out as moisture moves through the assembly. It means water is in the wall, not on it, and it doesn’t fix itself.
- A slab face out of plane with its neighbor. One piece proud of the next by even 1/16 inch points to a failed setting bed or a substrate that wasn’t flat when the stone went down. In a wet area, that lip is also a water trap.
- Darkening at the bottom course or at the floor junction. Stone wicks water. A darker band along a kick or floor seam is the assembly telling you the waterproofing behind it has a breach.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Techo-Bloc bathroom remodel in Glendale runs $9,000 – $28,000. A small bathroom remodel is $5,000 – $12,000. A walk-in shower installation with a stone floor and slab walls is $4,500 – $12,000, and a tub-to-shower conversion runs $3,500 – $10,000. If the fix is limited to re-facing an existing shower without moving plumbing, shower replacement is $3,000 – $8,500, and a vanity re-face or stone surround is $800 – $3,000.
What drives a Glendale estimate up or down: whether the shower is being re-framed (the common case when waterproofing has failed), whether you’re moving the drain or valve body, the slab series and thickness selected, and whether the walls need flattening before stone goes up. Every scope, allowance, and price change gets written on a change order before work happens. We pull the permit and the inspector signs the rough-in and the final – the inspector works for you, not us. Work that isn’t right gets fixed under our written 90-Day Done Right Promise.
| Scope | Installed range (Glendale) |
|---|---|
| Full bathroom remodel (Techo-Bloc slab/stone) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement / re-face | $3,000 – $8,500 |
| Vanity stone surround or re-face | $800 – $3,000 |
DIY or Call Us?
You can safely check a lot of this yourself. Run your knuckle along the walls and listen for hollow spots. Look at grout lines at every corner, curb, and niche return. Shine a light at the floor-to-wall seam. Read the back of any loose piece for a series stamp. All of that is diagnostic and safe.
Where it goes wrong: don’t pull a slab or paver off a shower wall to “see what’s behind it.” Removing stone from a wet assembly can drop the waterproofing with it and turn a re-face into a full re-build in one afternoon. Don’t re-grout a hollow field – grout over a failed setting bed traps the water in deeper. And skip any repair that involves cutting into the shower pan or moving the drain; that’s a permit and inspection job, and a failed pan leak in a Glendale condo can reach a downstairs neighbor fast.
Call Barrett & Sons Construction Glendale at (844) 560-4526. A live person answers 24/7. Free estimates are standard, and we’ll give you a free second opinion on any written estimate you already have – no trip charge inside the county.
FAQs
The stone itself outlasts the assembly around it by decades. What fails in a Glendale bathroom is the setting bed and waterproofing behind the stone, typically within 12 to 20 years of a shower built before modern surface-applied membranes became standard. When you see hollow spots or efflorescence, you’re looking at the assembly failing, not the stone.
Sometimes, yes. A single cracked paver on a shower floor or a loose vanity face can often be reset without opening the whole wall, provided the waterproofing behind it is intact and a matching piece is available. Hollow fields, breached pans, and grout that keeps re-cracking don’t respond to patching; those are re-builds. Call (844) 560-4526 and we’ll tell you which one you’re looking at – estimates are free.
A single-piece repair is a half-day to a day. A shower replacement or re-face is typically 3 to 5 working days, and a full Techo-Bloc bathroom remodel runs 2 to 4 weeks once materials are on site, longer if the bathroom is being re-framed and the permit inspection lands on the rough-in. We’d rather give you a realistic schedule up front than a number you have to chase us on.
We start from the original series name and the three measurements – thickness, face dimension, edge profile – then order the closest match through Techo-Bloc’s dealer network. If the series is discontinued, we’ll show you a comparable slab from the current line before anything is ordered, so the decision is yours in writing, not ours at the end of the job.
Yes. Alongside Techo-Bloc, we install KraftMaid cabinetry, Cambria countertops, and Silestone surfaces when a Glendale bathroom project calls for them – same written scope, same change orders, same 90-Day Done Right Promise. Call (844) 560-4526 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.