Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Techo-Bloc Driveway & Pavers: The Glendale Owner’s Guide
We install and repair Techo-Bloc driveways and paver systems across Glendale, and a full paver driveway install here typically runs $7,000 – $18,000 depending on square footage, base prep, and which Techo-Bloc series you choose. A single failed section, settled edge, or cracked unit is usually a smaller repair, and we price it line-item before anything gets pulled up. We’re an independent contractor and not affiliated with Techo-Bloc, but we know their lines well enough to match block, color, and thickness to what’s already on your Glendale driveway.
Most owners don’t notice a problem until a section starts rocking underfoot, a paver lifts at the driveway apron, or weeds push through a joint that used to be tight. By then the base layer has usually been moving for a season or two.
Key Takeaways
- Paver driveway installs in Glendale: $7,000 – $18,000 installed.
- The part that fails first is almost never the paver. It’s the base and the edge restraint.
- We match Techo-Bloc series, color, and thickness before quoting a repair.
- Cracked units and settled edges are fixable without ripping out the whole driveway.
Which Techo-Bloc Models This Applies To
Techo-Bloc sells paver driveways under several product families, and the one on your Glendale property changes what we order. The heavier, thicker lines built for vehicle load include Blu 60, Blu 80, and the Industria and Borealis collections, which run in the 60mm to 80mm thickness range for driveways rather than the thinner 50mm – 60mm patio units. If a prior owner used a patio-grade block on a driveway, that mismatch alone explains early cracking under car weight.
To identify what you have, lift one loose unit at an edge and measure thickness with a tape, and check the underside for a stamped mark or the manufacturer name. Photograph the top face next to a ruler so the pattern and color match. Color lots shift between production runs, so a repair that ignores lot matching will show as a patch even when the block is right.
The OEM-vs-aftermarket call matters here. A true Techo-Bloc replacement block gives you the exact dimensions and texture. A quality aftermarket paver of the same thickness can work for a hidden edge course or a small repair where color is less visible, and it often costs less. For anything in open view on a Glendale driveway, we lean OEM so the repair disappears.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Techo-Bloc Driveway & Pavers Is Failing
- Pavers rocking or shifting underfoot. The base beneath has settled or wasn’t compacted in lifts. Movement at the surface means the bedding sand and aggregate base have lost contact.
- Lifted or heaved units at the apron or edges. Usually an edge restraint that pulled loose or a base that wasn’t deep enough for Glendale’s clay-heavy soils, which swell when the winter rains return.
- Cracked or spalled blocks. Often a thickness mismatch, a point load from a heavy vehicle, or freeze-and-thaw moisture trapped in a porous unit. One or two cracks read as impact; a cluster reads as base failure.
- Weeds and sand loss in the joints. Joint sand washing out lets the blocks rub against each other and opens gaps for seed. It also tells us the surface isn’t draining the way it should.
- Ponding or runoff toward the house. A slope that was set wrong, or a base that settled, sends water where you don’t want it. In Glendale, that’s the failure that costs the most downstream.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s how the numbers land for Glendale, and we quote every job as a written line-item so the material and the labor are both visible.
| Scope | Installed Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
The range moves with square footage, how much base has to be excavated and re-compacted, whether an edge restraint needs rebuilding, and the Techo-Bloc series you pick. Small repairs to a settled section or a handful of cracked units sit well below the full-install numbers.
What’s included on our work: base prep and compaction, edge restraint, joint sand, and cleanup. Every eligible job gets permits pulled and inspections signed, and every price change arrives as a written change order before work moves. The finished work carries our 90-Day Done Right Promise, and we offer a free second opinion on any written estimate you’ve already got.
DIY or Call Us?
You can safely check a few things yourself. Lift a loose edge paver and measure thickness, note where water ponds, and photograph the pattern and color. What you shouldn’t tackle is resetting a base or rebuilding an edge restraint on a driveway that takes vehicle weight. A base that’s re-laid over uncompacted soil fails again within a season, and a driveway edge that lets go can send a car’s weight onto a section that was never built for it. That’s the kind of repair where a pro’s compaction and slope work is the whole point.
If your Techo-Bloc driveway in Glendale is rocking, cracking, or draining toward the house, call (844) 560-4526 for a free estimate. We’ll match the series, price it line by line, and tell you honestly whether a repair covers it or a section needs replacing.
Techo-Bloc FAQ’s
A well-installed Techo-Bloc driveway typically lasts 25 to 50 years, and the block itself often outlasts the base under it. In Glendale’s clay soils, the failure point is usually base settlement from seasonal moisture, not the paver. Call (844) 560-4526 and we’ll assess the base before you assume the whole driveway is done.
Yes, in most cases a settled section, a broken edge, or a cluster of cracked units can be lifted, re-based, and reset without replacing the entire driveway. We match series and color lot so the repair blends. Call (844) 560-4526 for a free estimate and we’ll tell you whether a repair holds or a larger section needs to come up.
A small repair of a few units or one settled section is often a day’s work, while a full driveway replacement in Glendale runs several days depending on square footage and base prep. We’ll give you the schedule in writing before we start. Call (844) 560-4526 to scope it.
We identify your series and thickness from the existing units, check the color lot, and order the matching Techo-Bloc product through authorized supply. We don’t carry parts and we’re not affiliated with Techo-Bloc, so we order to your driveway, not off a shelf. We also install and service KraftMaid, Cambria, and Silestone on other trades. Call (844) 560-4526 for a free estimate.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.